Épée

From Wikipedia, the free encyclopedia
  (Redirected from Shim (fencing))
Jump to: navigation, search
This article is about the sword. For the founder of public deaf education, see Charles-Michel de l'Épée.
Shown is an épée fencer, with the valid target area (the entire body) in red.

The épée /ˈɛp/ is the modern derivative of the dueling sword, the small sword (itself descended from the rapier by way of the colicharmarde), used in sport fencing. Épée is French for "sword".

As a thrusting weapon the épée is similar to a foil (compared to a sabre), but has a stiffer blade which is triangular in cross-section with a V-shaped groove called a fuller, has a larger bell guard, and is heavier. The technique however, is somewhat different, as there are no rules regarding priority and right of way. In addition, the entire body is a valid target area.

Background[edit]

Electric épée fencing: Diego Confalonieri (left) and Fabian Kauter in the final of the Trophée Monal

While modern sport fencing has three weapons (foil, épée, and sabre), each a separate event, épée is the only one in which the entire body is the valid target area. Épée is the heaviest of the three modern fencing weapons. Fencing matches with the épée require a large amount of concentration, accuracy and speed. Since the entire body is a target, a successful épée fencer must be able to anticipate their opponent's moves and strike their opponent at the correct time.

In most higher-level competitions a grounded metal piste is used to prevent floor hits from registering as touches. Unlike sabre and foil, in épée there are no right-of-way rules regarding attacks, other than the aforementioned rule regarding touches with only the point of the weapon. Touches are awarded solely on the basis of which fencer makes a touch first, according to the electronic scoring machines. Also, double-touches are allowed in épée, although the touches must occur within 40 milliseconds (1/25 of a second) of each other.

Description[edit]

An electric épée with a pistol grip

A modern épée for use by adult fencers (size 5) has a blade which measures 90 cm from the bell guard to the tip; the maximum allowable mass is 770g, but most competition weapons are much lighter, weighing 300g - 450g. Épées for use by children under 13 are shorter and lighter (size 2), making it easier for them to use.

The épée has a three-sided blade, in contrast to the foil and sabre which are rectangular in cross section. In competitions a valid épée touch is scored if a fencer touches the opponent with enough force to depress the tip; by rule, this is a minimum force of 750 grams-force (7.4 N). Since the hand is a valid target, the bellguard is much larger than that of the foil. The bell guard is typically made of aluminium or stainless steel. The tip is wired to a connector in the bellguard, then to an electronic scoring device or "box." The bellguard, blade, and handle of the épée are all grounded to the scoring box to prevent hits to the weapon from registering as touches.

The referee checks Kristina Kuusk's weapon in the Challenge International de Saint-Maur

In the groove formed by the V-shaped blade, there are two thin wires leading from the far end of the blade to a connector in the bellguard. These wires are held in place with a strong glue. The amount of glue is kept to a minimum as in the unlikely (but possible) case that a fencer manages a touch in that glue, the touch would be registered on the electrical equipment, as the glue is not conductive (the blade is grounded). In the event of tip to tip hits, a point should not be awarded. A "body cord" with a three-pronged plug at each end is placed underneath the fencer's clothing and attached to the connector in the bellguard, then to a wire leading to the scoring box. The scoring box signals with lights (one for each fencer) and a tone each time the tip is depressed.

The tip of an épée comprises several parts including: the mushroom-shaped movable tip; its housing or "barrel", which is threaded to the blade; a contact spring; and a return spring. The tips are generally held in place by two small grub screws, which thread into the sides of the tip through elongated openings on either side of the barrel. The screws hold the tip within the barrel but are allowed to travel freely in the openings. While this is the most common system, screwless variations do exist. The return spring must allow the tip to support a force of 750 gf (7.4 N) without registering a touch. Finally, an épée tip must allow a shim of 1.5 mm to be inserted between the tip and the barrel, and when a 0.5 mm shim is inserted and the tip depressed, it should not register a touch.[1] The contact spring is threaded in or out of the tip to adjust for this distance. These specifications are tested at the start of each bout during competitions. During competitions, fencers are required to have a minimum of two weapons and two body wires in case of failure or breakage.

Each fencing weapon has a different tempo, and like foil, the tempo for épée is rather slow with sudden bursts of speed.

History[edit]

Dueling Sword[edit]

A Swordfight, etching by Jacques Callot (1617)

The French word épée ultimately derives from Latin spatha. The term épée was introduced into English in the 1880s for the sportive fencing weapon.

Like the foil (fleuret), the épée evolved from light civilian weapons such as the smallsword, which since the late 17th century had been the most commonly used dueling sword, replacing the rapier.

The dueling sword developed in the 19th century when, under pressure from the authorities, duels were more frequently fought until "first blood" (as indicated by the French to English translation) only, instead of to the death. Under this provision, it became sufficient to inflict a minor nick on the wrist or other exposed area on the opponent in order to win the duel. This resulted in emphasis on light touches to the arm and hand, while downplaying hits to the torso.[clarification needed] Rapiers with full cup-guards had been made since the mid 17th century, but were not widespread before the 19th century.

Sport[edit]

Today, épée fencing very much resembles 19th century dueling. An épée fencer must hit the target with the tip of the weapon. A difference between épée and foil versus sabre is that a corps-à-corps or "body-to-body" contact between fencers is not necessarily an offense, unless it is done with "brutality or violence".

In the pre-electric era, épéeists used a point d'arrêt ("stopping point"), a three-pronged point with small protruding spikes, which would snag on the opponent's clothing or mask, helping the referee to see the hits. The spikes caused épée fencing to be a notoriously painful affair, and épéeists could be easily recognized by the tears in their jacket sleeves. A later evolution of the sport used a point that was dipped in a dye, which showed the location of touches on a white uniform; the dye was soluble in weak acid (e.g., acetic acid) to remove old marks.[2] Today competition is done with electric weapons, where a circuit is closed when the touch is made. Non-electric weapons are now typically used only for practice, generally fitted with plastic buttons.

See also[edit]

References[edit]

  1. ^ Garret, Maxwell R.; Kaidanov, Emmanuil G.; Pezza, Gil A. (1994). Foil, Saber, and Épée Fencing: Skills, Safety, Operations, and Responsibilities. Penn State University Press. p. 178. ISBN 0271010193. Retrieved 2012-11-26. 
  2. ^ Richard Cohen, By the Sword: A History of Gladiators, Musketeers, Samurai, Swashbucklers, and Olympic Champions, 2002, Random House, ISBN 978-0-375-50417-4; re-issued from Modern Library Paperbacks

External links[edit]