Slime mold

From Wikipedia, the free encyclopedia
  (Redirected from Slime molds)
Jump to: navigation, search

{{Hatnote|Not to be confused with slime bacteria or molds.

Iridescent slime mold, Diachea leucopodia. Berkeley, California
Slime mold Stemonitis fusca in Scotland, UK
Fuligo septica, the "dog vomit" slime mold
Mycetozoa from Ernst Haeckel's 1904 Kunstformen der Natur (Artforms of Nature)

Slime mold or slime mould is a broad term describing some organisms that use spores to reproduce. Slime molds were formerly classified as fungi but are no longer considered part of this kingdom.[1] Although not related to one another, they are still sometimes grouped for convenience within the paraphyletic group referred to as kingdom Protista.

Found in a wide variety of colors, more than 900 species of slime mold occur all over the world. Their common name refers to part of some of these organisms' life cycles where they can appear as gelatinous "slime". This is mostly seen with the myxogastria, which are the only macroscopic slime molds.[citation needed] Most slime molds are smaller than a few centimeters, but some species may reach sizes of up to several square meters and masses of up to 30 grams.[2]

Many slime molds, namely the "cellular" slime molds, actually do not spend most of their time in this state. As long as food is abundant, these slime molds exist as single-celled organisms. When food is in short supply, many of these single-celled organisms will congregate and start moving as a single body. In this state they are sensitive to airborne chemicals and can detect food sources. They can readily change the shape and function of parts and may form stalks that produce fruiting bodies, releasing countless spores, light enough to be carried on the wind or hitch a ride on passing animals.[3]

They feed on microorganisms that live in any type of dead plant material. They contribute to the decomposition of dead vegetation, and feed on bacteria, yeasts, and fungi. For this reason, slime molds are usually found in soil, lawns, and on the forest floor, commonly on deciduous logs. However, in tropical areas they are also common on inflorescences, fruits and in aerial situations (e.g., in the canopy of trees). In urban areas, they are found on mulch or even in the leaf mold in gutters, and also grow in air conditioners, especially when the drain is blocked. One of the most commonly encountered slime molds is the yellow Physarum polycephalum, found both in nature in forests in temperate zones, as well as in classrooms and laboratories.

Taxonomy[edit]

Older classification[edit]

Slime molds, as a group, are polyphyletic. They were originally represented by the subkingdom Gymnomycota in the Fungi kingdom and included the defunct phyla Myxomycota, Acrasiomycota and Labyrinthulomycota. Today, slime molds have been divided between several supergroups, none of which is included in the kingdom Fungi.

Slime molds can generally be divided into two main groups.

  • A plasmodial slime mold is enclosed within a single membrane without walls and is one large cell. This "supercell" (a syncytium) is essentially a bag of cytoplasm containing thousands of individual nuclei. See heterokaryosis.
  • By contrast, cellular slime molds spend most of their lives as individual unicellular protists, but when a chemical signal is secreted, they assemble into a cluster that acts as one organism.

Modern classification[edit]

In more strict terms, slime molds comprise the mycetozoan group of the amoebozoa. Mycetozoa include the following three groups:

Even at this level of classification there are conflicts to be resolved. Recent molecular evidence shows that the first two groups are likely to be monophyletic and the protosteloids however to be polyphyletic. For this reason, scientists are currently trying to understand the relationships among these three groups.

Slime mold (Physarum polycephalum)

The most commonly encountered are the Myxogastria. A common slime mold which forms tiny brown tufts on rotting logs is Stemonitis. Another form which lives in rotting logs and is often used in research is Physarum polycephalum. In logs it has the appearance of a slimy web-work of yellow threads, up to a few feet in size. Fuligo forms yellow crusts in mulch.

The Dictyosteliida, cellular slime molds, are distantly related to the plasmodial slime molds and have a very different lifestyle. Their amoebae do not form huge coenocytes, and remain individual. They live in similar habitats and feed on microorganisms. When food runs out and they are ready to form sporangia, they do something radically different. They release signal molecules into their environment, by which they find each other and create swarms. These amoeba then join up into a tiny multicellular slug-like coordinated creature, which crawls to an open lit place and grows into a fruiting body. Some of the amoebae become spores to begin the next generation, but some of the amoebae sacrifice themselves to become a dead stalk, lifting the spores up into the air.

The protosteloids have characters intermediate between the previous two groups, but they are much smaller, the fruiting bodies only forming one to a few spores.

Non-amoebozoan slime moulds include:

  • Acrasids (Order Acrasida): slime molds which belong to the Heterolobosea within the super group Excavata. They have a similar life style to Dictyostelids, but their amoebae behave differently, having eruptive pseudopodia. They used to belong to the defunct phylum of Acrasiomycota.
  • Plasmodiophorids (Order Plasmodiophorida): parasitic protists which belong to the super group Rhizaria. They can cause cabbage club root disease and powdery scab tuber disease. The Plasmodiophorids also form coenocytes but are internal parasites of plants (e.g., Club root disease of cabbages).
  • Labyrinthulomycota: slime nets which belong to the super group Chromalveolata as the class Labyrinthulomycetes. They are marine and form labyrinthine networks of tubes in which amoeba without pseudopods can travel.
  • Fonticula is a cellular slime mold which forms a fruiting body in a volcano shape.[4] Fonticula is not closely related to either the Dictyosteliida or the Acrasidae.[5] A 2009 paper finds it to be related to Nuclearia, which in turn is related to fungi.[6]
Grouping Genera Morphology
Amoebozoa > Conosa > Mycetozoa

Class Myxogastria: Cribraria, Lycogala, Tubifera, Echinostelium, Fuligo, Lepidoderma, Physarum, Comatricha, Stemonitis, Arcyria, Trichia

Syncytial or plasmodial slime molds

Class Dictyostelia: Dictyostelium, Polysphondylium, Acytostelium

Cellular slime molds

Class Protostelia: Planoprotostelium, Protostelium

Intermediate between myxomycetes and dictyostelids, but they are much smaller, the fruiting bodies only forming one to a few spores.
Rhizaria > Cercozoa > Endomyxa Class Phytomyxea: Lignieria, Membranosorus, Octomyxa, Phagomyxa, Plasmodiophora, Polymyxa, Sorodiscus, Sorosphaera, Spongospora, Tetramyxa, Woronina Parasitic protists which can cause cabbage club root disease and powdery scab tuber disease. They form coenocytes but are internal parasites of plants.
Excavata > Percolozoa > Heterolobosea Order Acrasida: Acrasis Cellular slime molds which have a similar life style to dictyostelids, but their amoebae behave differently, having eruptive pseudopodia.
Chromalveolate > Heterokontophyta > Labyrinthulomycetes Order Labyrinthulida: Labyrinthulids, Labyrinthula, Thraustochytrids, Aplanochytrium, Labyrinthuloides, Japonochytrium, Schizochytrium, Thraustochytrium, Ulkenia, Diplophryids, Diplophrys Slime nets which are marine and form labyrinthine networks of tubes in which amoeba without pseudopods can travel.
Fonticulida Fonticula Cellular slime mold which forms a fruiting body in a volcano shape.

Life cycle[edit]

Slime mold growing out of a bin of wet paper

Slime molds begin life as amoeba-like cells. These unicellular amoebae are commonly haploid and multiply if they encounter their favorite food, bacteria. These amoebae can mate if they encounter the correct mating type and form zygotes which then grow into plasmodia. These contain many nuclei without cell membranes between them, which can grow to be meters in size. The species Fuligo septica is often seen as a slimy yellow network in and on rotting logs. The amoebae and the plasmodia engulf microorganisms. The plasmodium grows into an interconnected network of protoplasmic strands.[7]

Within each protoplasmic strand the cytoplasmic contents rapidly stream. If one strand is carefully watched for about 50 seconds the cytoplasm can be seen to slow, stop, and then reverse direction. The streaming protoplasm within a plasmodial strand can reach speeds of up to 1.35 mm per second which is the fastest rate recorded for any micro-organism.[8] Migration of the plasmodium is accomplished when more protoplasm streams to advancing areas and protoplasm is withdrawn from rear areas. When the food supply wanes, the plasmodium will migrate to the surface of its substrate and transform into rigid fruiting bodies. The fruiting bodies or sporangia are what we commonly see; they superficially look like fungi or molds but are not related to the true fungi. These sporangia will then release spores which hatch into amoebae to begin the life cycle again.[7]

Plasmodia[edit]

The mid sporangial phase of Enteridium lycoperdon on a mossy tree trunk.

In Myxogastria, the plasmoidal portion of the life cycle only occurs after syngamy, which is the fusion of cytoplasm and nuclei of myxoamoebae or swarm cells. The diploid zygote becomes a multinucleated plasmodium through multiple nuclear divisions without further cell division. Myxomycete plasmodia are multinucleate masses of protoplasm that move by cytoplasmic streaming. In order for the plasmodium to move, cytoplasm must be diverted towards the leading edge from the lagging end. This process results in the plasmodium advancing in fan-like fronts. As it moves, plasmodium also gains nutrients through the phagocytosis of bacteria and small pieces of organic matter.

The plasmodium also has the ability to subdivide and establish separate plasmodia. Conversely, separate plasmodia that are genetically similar and compatible can fuse together to create a larger plasmodium. In the event that conditions become dry, the plasmodium will form a sclerotium, essentially a dry and dormant state. In the event that conditions become moist again the sclerotium absorbs water and an active plasmodium is restored. When the food supply wanes, the Myxomycete plasmodium will enter the next stage of its life cycle forming haploid spores, often in a well-defined sporangium or other spore-bearing structure.

Behavior[edit]

When a slime mold mass or mound is physically separated, the cells find their way back to re-unite. Studies on Physarum have even shown an ability to learn and predict periodic unfavorable conditions in laboratory experiments (Saigusa et al. 2008).[9][10] Professor John Tyler Bonner, who has spent a lifetime studying slime molds argues that they are "no more than a bag of amoebae encased in a thin slime sheath, yet they manage to have various behaviours that are equal to those of animals who possess muscles and nerves with ganglia – that is, simple brains."

Atsushi Tero of Hokkaido University grew the slime mold Physarum polycephalum in a flat wet dish. He placed the mold in a central position representing Tokyo, and he placed oat flakes in the dish corresponding to the locations of other major cities in the Greater Tokyo Area. As Physarum avoids bright light, light was used to simulate mountains, water and other obstacles in the dish. The mold first densely filled the space with plasmodia, then thinned the network to focus on efficiently connected branches. The network strikingly resembled Tokyo's rail system.[11]

See also[edit]

References[edit]

  1. ^ "Introduction to the "Slime Molds"". University of California Museum of Paleontology. Retrieved 2009-04-04. 
  2. ^ "Zinc Accumulation by the Slime Mold Fuligo septica (L.) Wiggers in the Former Soviet Union and North Korea". Retrieved 12 December 2009. [dead link]
  3. ^ Frederick Spiegel – University of Arkansas
  4. ^ Mary C. Deasey and Lindsay S. Olive (31 July 1981), "Role of Golgi Apparatus in Sorogenesis by the Cellular Slime Mold Fonticula alba", Science 213 (4507): 561–563, doi:10.1126/science.213.4507.561 
  5. ^ Ann C. Worley, Kenneth B. Raper and Marianne Hohl (Jul–Aug 1979), "Fonticula alba: A New Cellular Slime Mold (Acrasiomycetes)", Mycologia 71 (4): 746–760, doi:10.2307/3759186 
  6. ^ Matthew W. Brown, Frederick W. Spiegel and Jeffrey D. Silberman (2009), "Phylogeny of the "Forgotten" Cellular Slime Mold, Fonticula alba, Reveals a Key Evolutionary Branch within Opisthokonta", Molecular Biology and Evolution 26 (12): 2699–2709, doi:10.1093/molbev/msp185, PMID 19692665 
  7. ^ a b Ling, H. 1999. "Myxomycetes, Commonly Overlooked Plants" The Native Plant Society of NJ Newsletter, Fall p5.
  8. ^ Alexopolous, C.J. 1962, second edition. "Introductory Mycology" John Wiley and Sons, p. 78.
  9. ^ Saigusa , T et al Amoebae Anticipate Periodic Events. Hokkaido University PRL 100,018101 (2008)
  10. ^ http://discovermagazine.com/2009/jan/071
  11. ^ Tero et al. 2010. Rules for Biologically Inspired Adaptive Network Design. Science 10.1126/science.1177894

External links[edit]