LGA 1366

From Wikipedia, the free encyclopedia
  (Redirected from Socket B)
Jump to: navigation, search
Socket B
LGA Socket 1366.jpg
Type LGA
Chip form factors Flip-chip land grid array
Contacts 1366
FSB protocol Intel QuickPath Interconnect
FSB frequency 1× to 2× QuickPath
Processor dimensions 1.77 × 1.67 inches (44.958mm x 42.418mm) [1]
Processors Intel Core i7 (9xx series)
Intel Xeon (35xx, 36xx,
55xx, 56xx series)
Intel Celeron P1053
Predecessor LGA 775
LGA 771
Successor LGA 2011
LGA 1356

This article is part of the CPU socket series

LGA 1366, also known as Socket B,[2][3] is an Intel CPU socket. This socket supersedes Intel's LGA 775 (Socket T) in the high-end and performance desktop segments. It also replaces the server-oriented LGA 771 (Socket J) in the entry level and is superseded itself by LGA 2011. LGA stands for land grid array. This socket has 1,366 protruding pins which touch contact points on the underside of the processor (CPU)[4] and accesses up to three channels of DDR3 memory via the processor's internal memory controller.

Socket 1366 (Socket B) uses QPI to connect the CPU to a reduced-function northbridge that serves mainly as a PCI-Express controller. A slower DMI is used to connect Intel's most recent northbridge and southbridge components. By comparison, Intel's socket 1156 (Socket H) moves the QPI link and PCI-Express controller onto the processor itself, using DMI to interface a single-component "chipset" (now called PCH) that serves traditional southbridge functions. The difference in pin number is mostly a reflection of the number of memory channels served.

In November 2008, Intel released Core i7, which was the first processor requiring this socket.

LGA 1366 socket and processors were discontinued sometime in 2012,[5] and superseded by the LGA 2011 socket, on November 14, 2011, supporting Sandy Bridge E-series processors. LGA 1156 was discontinued at the same time.

Socket B mechanical load limits[edit]

Socket B processors have the following mechanical maximum load limits which should not be exceeded during heatsink assembly, shipping conditions, or standard use. Load above those limits will crack the processor die and make it unusable.

Location Dynamic Static
IHS Surface 890 N (200 lbf) (90 kp) 266 N (60 lbf) (27 kp)

Processors using this socket have a lower static load limit than previous models using LGA 775.

Supported chipsets[edit]

The desktop chipset that supports LGA 1366 is Intel's X58.

See also[edit]

References[edit]