In stereochemistry, the specific rotation ([α]) is an intensive property of a chemical compound, defined as the change in orientation of the plane of linearly polarized light as this light passes through a sample with a path length of 1 decimeter and a sample concentration of 1 gram per 1 millilitre. It is the main property used to quantify the chirality of a molecular species or a mineral. The specific rotation of a pure material is an intrinsic property of that material at a given wavelength and temperature. Values should always be accompanied by the temperature at which the measurement was performed and the solvent in which the material was dissolved. Often the temperature is not specified; in these cases it is assumed to be standard room temperature (20°C). The formal unit for specific rotation values is deg dm−1cm3 g−1 but scientific literature uses just degrees. A negative value means levorotatory rotation and a positive value means dextrorotatory rotation. Dextrorotatory means that the plane of polarization is turned clockwise when the light comes through the sample to the observer.
Optical rotation is measured with an instrument called a polarimeter. There is a linear relationship between the observed rotation and the concentration of optically active compound in the sample. There is a nonlinear relationship between the observed rotation and the wavelength of light used. Specific rotation is calculated using either of two equations, depending on whether the sample is a pure chemical to be tested or that chemical dissolved in solution.
For pure liquids
This equation is used:
In this equation, α (Greek letter "alpha") is the measured rotation in degrees, l is the path length in decimeters, and ρ (Greek letter "rho") is the density of the liquid in g/mL, for a sample at a temperature T (given in degrees Celsius) and wavelength λ (in nanometers). If the wavelength of the light used is 589 nanometers (the sodium D line), the symbol “D” is used. The sign of the rotation (+ or −) is always given.
A different equation is used:
In this equation, α (Greek letter "alpha") is the measured rotation in degrees, l is the path length in decimeters and c is the concentration in g/mL, for a sample at a temperature T (given in degrees Celsius) and wavelength λ (in nanometers). If the wavelength of the light used is 589 nanometer (the sodium D line), the symbol “D” is used. The sign of the rotation (+ or −) is always given. When using this equation, the concentration and the solvent may be provided in parentheses after the rotation. The rotation is reported using degrees, and no units of concentration are given (it is assumed to be g/100mL).
- ° (c 1.0, EtOH)
Dealing with large and small rotations
If a compound has a very large specific rotation or a sample is very concentrated, the actual rotation of the sample may be larger than 180°, and so a single polarimeter measurement cannot detect when this has happened (for example, the values +270° and −90° are not distinguishable, nor are the values 361° and 1°). In these cases, measuring the rotation at several different concentrations allows one to determine the true value. Another method would be to use shorter path-lengths to perform the measurements.
In cases of very small or very large angles, one can also use the variation of specific rotation with wavelength to facilitate measurement. Switching wavelength is particularly useful when the angle is small. Many polarimeters are equipped with a mercury lamp (in addition to the sodium lamp) for this purpose.
The variation of specific rotation with wavelength is called optical rotatory dispersion (ORD). ORD can be used to elucidate the absolute configuration of certain compounds.
Measuring optical rotation provides, in theory, a way to assess optical purity of a sample containing a mixture of enantiomers. For example, if a sample of bromobutane measured under standard conditions has an observed rotation of −9.2°, this indicates that the net effect is due to (100%)(9.2°/23.1°)=40% of the R enantiomer. The remainder of the sample is a racemic mixture of the enantiomers (30% R and 30% S), which has no net contribution to the observed rotation. The enantiomeric excess is 40%; the total concentration of R is 70%. However, in practice the utility of this method is limited, as the presence of small amounts of highly rotating impurities can greatly affect the rotation of a given sample. Moreover, the optical rotation of a compound may be non-linearly dependent on its enantiomeric excess because of aggregation in solution. For these reasons other methods of determining the enantiomeric ratio such as gas chromatography or HPLC with a chiral column is generally preferred.
- (S)-2-Bromobutane +23.1°
- (R)-2-Bromobutane −23.1°
- D-Fructose −92.4°
- D-Glucose +52.5°
- D-Sucrose +66.47°
- D-Lactose +52.3°
- Camphor +44.1°
- Cholesterol −31.5°
- Paclitaxel −49°
- Penicillin V +223°
- (+)-Cavicularin +168.2°
- Hexol bromocamphorsulphonate 2640°
All values are given in units of deg dm−1cm3 g−1.