# Stern–Brocot tree

(Redirected from Stern-Brocot tree)
The Stern–Brocot tree, and the Stern–Brocot sequences of order i for i = 1, 2, 3, 4.

In number theory, the Stern–Brocot tree is an infinite complete binary tree in which the vertices correspond one-for-one to the positive rational numbers, whose values are ordered from left to right as in a search tree.

The Stern–Brocot tree was discovered independently by Moritz Stern (1858) and Achille Brocot (1861). Stern was a German number theorist; Brocot was a French clockmaker who used the Stern–Brocot tree to design systems of gears with a gear ratio close to some desired value by finding a ratio of smooth numbers near that value.

The root of the Stern–Brocot tree corresponds to the number 1. The parent-child relation between numbers in the Stern–Brocot tree may be defined in terms of continued fractions or mediants, and a path in the tree from the root to any other number q provides a sequence of approximations to q with smaller denominators than q. Because the tree contains each positive rational number exactly once, a breadth first search of the tree provides a method of listing all positive rationals that is closely related to Farey sequences.

## A tree of continued fractions

Every positive rational number q may be expressed as a continued fraction of the form

$q = a_0 + \cfrac{1}{a_1 + \cfrac{1}{a_2 + \cfrac{1}{a_3 + \cfrac{1}{\ddots+\tfrac1{a_k}}}}}= [a_0; a_1, a_2, \ldots, a_k]$

where k and a0 are non-negative integers, and each subsequent coefficient ai is a positive integer. This representation is not unique because one has

$\displaystyle[a_0; a_1, a_2, \ldots, a_{k-1}, 1] = [a_0; a_1, a_2, \ldots, a_{k-1}+1]$

for every sequence of coefficients a0, ..., ak−1. Using this identity to rewrite any representation of the former form into the latter form, one may obtain that the final coefficient satisfies ak ≥ 2 (unless k = 0, in which case one obtains a0 ≥ 1); with this additional requirement the representation becomes unique. Then, unless q = 1, then number q has a parent in the Stern–Brocot tree given by the continued fraction expression

$\displaystyle [a_0; a_1, a_2, \ldots, a_k-1],$

which in case ak = 2 one can rewrite as $[a_0; a_1, a_2, \ldots, a_{k-1}+1]$. For instance, the rational number 2316 has the continued fraction representation

$\frac{23}{16}=1+\cfrac1{2+\cfrac1{3+\frac12}} = [1;2,3,2],$

so its parent in the Stern–Brocot tree is the number

$[1;2,3,1]=[1;2,4]=1+\cfrac1{2+\frac14}=\frac{13}{9}.$

This parent is formed by decreasing the denominator in the innermost term of the continued fraction by 1, and contracting with the previous term if the fraction becomes $\tfrac11$.

Conversely each number q in the Stern–Brocot tree has exactly two children: if

$\displaystyle q = [a_0; a_1, a_2, \ldots, a_k] = [a_0; a_1, a_2, \ldots, a_k-1,1]$

then one child is the number represented by the continued fraction

$\displaystyle [a_0; a_1, a_2, \ldots, a_k+1]$

while the other child is represented by the continued fraction

$\displaystyle [a_0; a_1, a_2, \ldots, a_k-1,2].$

One of these children is less than q and this is the left child; the other is greater than q and it is the right child (in fact the former expression gives the left child if k is odd, and the right child if k is even). For instance, the continued fraction representation of 139 is [1;2,4] and its two children are [1;2,5] = 1611 (the right child) and [1;2,3,2] = 2316 (the left child).

It is clear that for each finite continued fraction expression one can repeatedly move to its parent, and reach the root [1;]=11 of the tree in finitely many steps (in a0 + ... + ak − 1 steps to be precise). Therefore every positive rational number appears exactly once in this tree. Moreover all descendants of the left child of any number q are less than q, and all descendants of the right child of q are greater than q. The numbers at depth d in the tree are the numbers for which the sum of the continued fraction coefficients is d + 1.

## Mediants and binary search

The Stern–Brocot tree forms an infinite binary search tree with respect to the usual ordering of the rational numbers.[1] The set of rational numbers descending from a node q is defined by the open interval (Lq,Hq) where Lq is the ancestor of q that is smaller than q and closest to it in the tree (or Lq = 0 if q has no smaller ancestor) while Hq is the ancestor of q that is larger than q and closest to it in the tree (or Hq = +∞ if q has no larger ancestor).

The path from the root 1 to a number q in the Stern–Brocot tree may be found by a binary search algorithm, which may be expressed in a simple way using mediants. Augment the non-negative rational numbers to including a value 1/0 (representing +∞) that is by definition greater than all other rationals. The binary search algorithm proceeds as follows:

• Initialize two values L and H to 0/1 and 1/0, respectively.
• Until q is found, repeat the following steps:
• Let L = a/b and H = c/d; compute the mediant M = (a + c)/(b + d).
• If M is less than q, then q is in the open interval (M,H); replace L by M and continue.
• If M is greater than q, then q is in the open interval (L,M); replace H by M and continue.
• In the remaining case, q = M; terminate the search algorithm.

The sequence of values M computed by this search is exactly the sequence of values on the path from the root to q in the Stern–Brocot tree. Each open interval (L,H) occurring at some step in the search is the interval (LM,HM) representing the descendants of the mediant M. The parent of q in the Stern–Brocot tree is the last mediant found that is not equal to q.

This binary search procedure can be used to convert floating-point numbers into rational numbers. By stopping once the desired precision is reached, floating-point numbers can be approximated to arbitrary precision.[2] If a real number x is approximated by any rational number a/b that is not in the sequence of mediants found by the algorithm above, then the sequence of mediants contains a closer approximation to x that has a denominator at most equal to b; in that sense, these mediants form the best rational approximations to x.

The Stern–Brocot tree may itself be defined directly in terms of mediants: the left child of any number q is the mediant of q with its closest smaller ancestor, and the right child of q is the mediant of q with its closest larger ancestor. In this formula, q and its ancestor must both be taken in lowest terms, and if there is no smaller or larger ancestor then 0/1 or 1/0 should be used respectively. Again, using 7/5 as an example, its closest smaller ancestor is 4/3, so its left child is (4 + 7)/(3 + 5) = 11/8, and its closest larger ancestor is 3/2, so its right child is (7 + 3)/(5 + 2) = 10/7.

## Relation to Farey sequences

The Farey sequence of order n is the sorted sequence of fractions in the closed interval [0,1] that have denominator less than or equal to n. As in the binary search technique for generating the Stern–Brocot tree, the Farey sequences can be constructed using mediants: the Farey sequence of order n + 1 is formed from the Farey sequence of order n by computing the mediant of each two consecutive values in the Farey sequence of order n, keeping the subset of mediants that have denominator exactly equal to n + 1, and placing these mediants between the two values from which they were computed.

A similar process of mediant insertion, starting with a different pair of interval endpoints [0/1,1/0], may also be seen to describe the construction of the vertices at each level of the Stern–Brocot tree. The Stern–Brocot sequence of order 0 is the sequence [0/1,1/0], and the Stern–Brocot sequence of order i is the sequence formed by inserting a mediant between each consecutive pair of values in the Stern–Brocot sequence of order i − 1. The Stern–Brocot sequence of order i consists of all values at the first i levels of the Stern–Brocot tree, together with the boundary values 0/1 and 1/0, in numerical order.

Thus the Stern–Brocot sequences differ from the Farey sequences in two ways: they eventually include all positive rationals, not just the rationals within the interval [0,1], and at the nth step all mediants are included, not only the ones with denominator equal to n. The Farey sequence of order n may be found by an inorder traversal of the left subtree of the Stern–Brocot tree, backtracking whenever a number with denominator greater than n is reached.

If ${ \frac{p_1}{q_1}, \frac{p_2}{q_2}, \dots, \frac{p_n}{q_n} }$ are all the rationals at the same depth in the Stern–Brocot tree, then

$\sum_{k=1}^n \frac{1}{p_kq_k} = 1$.[3]

Along with the definitions in terms of continued fractions and mediants described above, the Stern–Brocot tree may also be defined as a Cartesian tree for the rational numbers, prioritized by their denominators. That is, it is the unique binary search tree of the rational numbers in which the parent of any vertex q has a smaller denominator than q (or, if q and its parent are both integers, in which the parent is smaller than q). It follows from the theory of Cartesian trees that the lowest common ancestor of any two numbers q and r in the Stern–Brocot tree is the rational number in the closed interval [qr] that has the smallest denominator among all numbers in this interval.

Permuting the vertices on each level of the Stern–Brocot tree by a bit-reversal permutation produces a different tree, the Calkin–Wilf tree, in which the children of each number a/b are the two numbers a/(a + b) and (a + b)/b. Like the Stern–Brocot tree, the Calkin–Wilf tree contains each positive rational number exactly once, but it is not a binary search tree.