Talk:Self-tapping screw

Metalworking Low‑importance

	This article is within the scope of WikiProject Metalworking, a collaborative effort to improve the coverage of Metalworking on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.MetalworkingWikipedia:WikiProject MetalworkingTemplate:WikiProject MetalworkingMetalworking articles
Low	This article has been rated as Low-importance on the project's importance scale.

Woodworking (inactive)

This article is within the scope of WikiProject Woodworking, a project which is currently considered to be inactive.WoodworkingWikipedia:WikiProject WoodworkingTemplate:WikiProject WoodworkingWoodworking articles

Engineering Low‑importance

	Engineering portal This article is within the scope of WikiProject Engineering, a collaborative effort to improve the coverage of engineering on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.EngineeringWikipedia:WikiProject EngineeringTemplate:WikiProject EngineeringEngineering articles
Low	This article has been rated as Low-importance on the project's importance scale.

This page has been transwikied to Wiktionary.
The article has content that is useful at Wiktionary. Therefore the article can be found at either here or here (logs 1 logs 2.)
Note: This means that the article has been copied to the Wiktionary Transwiki namespace for evaluation and formatting. It does not mean that the article is in the Wiktionary main namespace, or that it has been removed from Wikipedia's. Furthermore, the Wiktionarians might delete the article from Wiktionary if they do not find it to be appropriate for the Wiktionary.
Removing this tag will usually trigger CopyToWiktionaryBot to re-transwiki the entry. This article should have been removed from Category:Copy to Wiktionary and should not be re-added there.

Untitled[edit]

this article seems to contradict itself, second sentence "Self-tapping screws are commonly used with sheet metal and plastic components." last sentence "Self tapping screws are most useful when doing metal and wood work." —Preceding unsigned comment added by 68.0.144.113 (talk) 02:19, 26 April 2008 (UTC)[reply]

Self-tappers aren't intended for use in wood. Those are woodscrews, and are different. This article confuses self tappers (originally for sheetmetal) with the broader abstract group of thread-forming screws (which includes woodscrews, self-tappers, and threads like pentalobe Taptite screws that self-form a thread in ductile metals, but need a pilot hole to do so).

This is also complicated by modern parallel-thread woodscrews, developed for use in man-made boards, as these strongly resemble self-tappers to the naked eye (the shape is identical but the thread profile is different). Andy Dingley (talk) 15:48, 30 December 2013 (UTC)[reply]

Home Improvement StackExchange is criticising this article's choice of images[edit]

[1] 2A00:23C5:FE0B:700:21C2:3906:554E:213E (talk) 20:08, 22 February 2020 (UTC)[reply]

Welcome to Wikipedia. Rule #1 of image use is that we have to either work with what we have, or photograph some new ones. We can't just magic up the perfect image. OK, it's only screws – we have screws to hand, we can do some new photos. But still, it's more work to do that than to use what's already there.

Media related to Self-tapping_screws at Wikimedia Commons

It's not a great photo - it would be better if it showed the tips. But these are self-tappers. As the article describes, they're self-tappers for ductile materials. They're not self-cutting (with flutes), Taptite (non-circular), or self-drilling (with drill points), but they are still the basic self-tapper.

They're not machine screws, or bolts (most of which can be used as screws). Nor are they the traditional (tapered thread) woodscrew (although modern woodscrews for man-made boards are parallel-threaded and almost indistinguishable).

This, "just regular sheet metal screws" is odd because that's exactly what they are: screws used in sheetmetal are self-tappers (sometimes sheetmetal work uses inserted nuts, but that's less common). But then clearly StackExchange doesn't have much of a clue on screws, and certainly doesn't rely on robust off-site sourcing.

If you want a better image, then fine (we could use one). But we'd have to start by finding one, not just removing the existing one. Andy Dingley (talk) 21:31, 22 February 2020 (UTC)[reply]

This file (https://commons.wikimedia.org/wiki/File:Self_tapping_screw.tif) which is already on the Wikimedia Commons seems like a better representation and is similar to what people were showing on the stackexchange thread, I went ahead and changed it for now. Is everyone happy with the new photo? O0factuallycorrect0o (talk) 20:03, 23 February 2020 (UTC)[reply]

No (and it's already reverted) because they're self-drilling self-tappers (which is a sub-group within self tappers) and it's untrue in the added text that self-tappers are all also self-drilling. Many of them, require existing holes. Most of them need holes in some materials (such as sheetmetal) but can pierce their own holes in something softer, such as plastics. Andy Dingley (talk) 20:16, 23 February 2020 (UTC)[reply]