Tangeværket Dam

Tangevaerket Dam
Powerhouse
Location of Tangevaerket Dam in Denmark
Country	Denmark
Location	Tange, Viborg Municipality
Coordinates	56°21′4.72″N 9°36′13.95″E
Purpose	Power
Status	Operational
Construction began	1918
Opening date	1921 (1921)
Dam and spillways
Height	12 m (39 ft)
Length	800 m (2,600 ft)
Width (crest)	10 m (33 ft)
Width (base)	50 m (160 ft)
Reservoir
Creates	Tange Sø
Total capacity	20,000,000 m3 (16,000 acre⋅ft)
Surface area	625 ha (1,540 acres)
Operator(s)	Gudenaacentralen AN/S
Commission date	1920
Hydraulic head	10.5 m (34 ft)
Turbines	3 x 1.1 MW Francis-type
Installed capacity	3.3 MW
Capacity factor	38%
Annual generation	11,000 MWh

The Tangevaerket Dam is an earth-fill embankment dam on the Gudenå River just east of the town of Tange in Viborg Municipality, Denmark. The primary purpose of the dam is hydroelectric power production and it supports a 3.3 MW power station which is the largest in the nation. The dam and power station were designed by Kristian Thomsen and S. A. Angelo in 1909. Construction did not begin until an agreement was reached with the Gudenå Commission. To build the dam, 500 men moved, by hand, about 300,000 m³ (390,000 cu yd) of earth. The power station was commissioned on 20 December 1920 and the reservoir flooded five homes and 22 farms. Its inauguration occurred on 8 January 1921. To produce power, water from the reservoir moves down a 500 m (1,600 ft) long and 6 m (20 ft) deep channel to the power station which houses three 1.1 MW Francis turbine-generators. The dam is also equipped with a fish ladder.

The power station's original concession for power production was set for 80 years. The concession has since been prolonged several times. Last in 2015 where it was prolonged by another 30 years.