||This article may be too technical for most readers to understand. (September 2010)|
Thermoplastic polyurethane (TPU) is any of a class of polyurethane plastics with many useful properties, including elasticity, transparency, and resistance to oil, grease and abrasion. Technically, they are thermoplastic elastomers consisting of linear segmented block copolymers composed of hard and soft segments.
TPU are formed by the reaction of: (1) diisocyanates with short-chain diols (so-called chain extenders) and (2) diisocyanates with long-chain diols. The practically unlimited amount of possible combinations producible by varying the structure and/or molecular weight of the three reaction compounds allows for an enormous variety of different TPU. This allows urethane chemists to fine-tune the polymer’s structure to the desired final properties of the material.
The final resin consists of linear polymeric chains in block-structures. Such chains contain low polarity segments which are rather long (called soft segments), alternating with shorter, high polarity segments (called hard segments). Both types of segments are linked together by covalent links, so that they actually form block-copolymers.
The polarity of the hard pieces creates a strong attraction between them, which causes a high degree of aggregation and order in this phase, forming crystalline or pseudo crystalline areas located in a soft and flexible matrix. This so-called phase separation between both blocks can be more or less important, depending on the polarity and the molecular weight of the flexible chain, the production conditions, etc. The crystalline or pseudo crystalline areas act as physical cross-links, which account for the high elasticity level of TPU, whereas the flexible chains will impart the elongation characteristics to the polymer.
These "pseudo crosslinks", however, disappear under the effect of heat, and thus the classical extrusion, injection moulding and calendering processing methods are applicable to these materials. Consequently, TPU scrap can be reprocessed.
TPU has many applications including automotive instrument panels, caster wheels, power tools, sporting goods, medical devices, drive belts, footwear, inflatable rafts, and a variety of extruded film, sheet and profile applications. TPU is also a popular material found in cases of mobile electronic devices, such as mobile phones.
Overview of TPU on the market
Properties of commercially available TPU include:
- abrasion resistance
- low-temperature performance
- mechanical properties, combined with a rubber-like elasticity
- shear strength
- oil and grease resistance
The currently available TPUs can be divided mainly in two groups, based on soft segment chemistry:
- polyester-based TPUs (mainly derived from adipic acid esters)
- polyether-based TPUs (mainly based on tetrahydrofuran (THF) ethers). The differences between these two groups are outlined in the table below:
Table of properties
|This section does not cite any references or sources. (October 2011)|
Table 1: Main differences between polyester- and polyether-based TPU.
(A = excellent; B = good; C = acceptable; D = poor; F = very poor)
|Property||Polyester-based TPU||Polyether-based TPU|
|Low temperature flexibility||C||A|
In other words, polyether-based TPU is used only in cases where excellent hydrolysis and microbial resistance is required, as well as in cases where extreme low temperature flexibility is important.
Recently, BASF has pioneered crosslinking during TPU production, made possible by adding liquid crosslinkers and using a masterbatch. Plant-based bio TPU has been developed for green thermoplastic elastomer applications by Merquinsa and GRECO, marketed as Pearlthane ECO and Isothane respectively.
Key commercial brands available are:
- Epamould, Epaline for extrusion, Epacol for adhesives, Pakoflex for Synthetic Leather (EPAFLEX)
- Elastollan (BASF & Elastogran)
- Pearlthane (Merquinsa)
- Desmopan (Bayer)
- Estane (Lubrizol)
- Pellethane (Lubrizol)
- New power industrial limited (New power®)
- Irogran (Huntsman)
- Exelast EC (Shin-Etsu Polymer Europe B.V.)
- Laripur (COIM SpA)
- Avalon (Huntsman) -
- Isothane (Greco )
- Zythane (Alliance Polymers & Services)Zythane
- "Texin® thermoplastic polyurethane (TPU) resin". Bayer Material Science. Retrieved 2012-02-26.
- "Thermoplastic Polyurethane". American Chemical Council. Retrieved 2012-02-26.
- "PEARLTHANE". Merquinsa, A Lubrizol Company. Retrieved 2013-01-31.
- "Elastogran GmbH - Thermoplastic polyurethane elastomers". www.elastogran.de. Retrieved 2009-12-26.
- "Merquinsa home page". Merquinsa. Retrieved 18 February 2011.
- "Bayer MaterialScience - Thermoplastic Polyurethanes". Bayer. Retrieved 18 February 2011.
- "Estane Engineered Polymers". Lubrizol. Retrieved 18 February 2011.
- "Lubrizol - Pellethane TPE". Lubrizol. Retrieved 18 February 2011.
- "Huntsman TPU: Shaping Your World". Huntsman Corporation. Retrieved 18 February 2011.
- "Shin-Etsu Polymor Co., Ltd - Products". Shin-Etsu Chemical. Retrieved 18 February 2011.
- "Chemical Products - Laripur - Thermoplastic polyurethanes". COIM Group. Retrieved 18 February 2011.
- "GRECO - Thermoplastic polyurethane elastomers". http://www.greco.com.tw/. Retrieved 2009-12-26.
13. Zythane TPU Thermoplastic polyurethane elastomers http://www.apstpe.com/home/