Hail spike

From Wikipedia, the free encyclopedia
  (Redirected from Three body scatter spike)
Jump to: navigation, search
Example of a three body spike : the weak triangular echoes behind the red and white thunderstorm core (pointed by an arrow).

A hail spike or three body scatter spike (TBSS) is an artifact on a weather radar display indicative of large hail. They are identified by a spike of weak reflectivity echoes that extend out from a thunderstorm, and away from the radar site.

Cause[edit]

The multiple reflections of the radar beam causing the hail spike

Generally known as hail spikes, these are the result of energy from the radar hitting hail, or very heavy rain, and being reflected to the ground, where they reflect back to the hail and then to the radar as in the image on the left.[1] This results in the radar picking up the energy from the multiple path at a later time than the energy that came back directly from the hail to the radar. Both are however on the same radial angle from the radar as the antenna did not have the time to turn significantly.

The multipath echoes are then analyzed on the radar display as echoes extending in a radial direction behind the actual location of the hail/heavy rain core. The loss of energy by due to multiple reflections means weaker return echoes. The hail spike region has thus comparatively quite weaker echoes than the echoes directly from the hail or heavy rain core.[1]

Since hail cores are most intense at higher elevations, hail spikes usually appear at the levels aloft that accompany the most intense hail. Because of this, hail spikes are usually not seen at lower elevations.[1] Another restriction to detection is that the signal of the radar beam has to do multiple reflections, each time weakening it. So hail spikes are usually noticeable only in extremely large hailstone cases.[2]

Multiple TBSS Signatures[edit]

3-D image showing three separate TBSS signatures in one volume scan

In rare cases more than one hail spike has been documented with a single storm in one volume scan.[3] This indicates that more than one hail core exists in the same storm and far enough apart that each core can be sampled by the radar individually.

Use in forecasting[edit]

A cross-Section of a Three body spike from an Anti-Cyclonic Thunderstorm. The spike is the boxed areas to the left.

Because of their observed accuracy in indicating large hail aloft, TBSS's are used operationally by the National Weather Service to identify thunderstorms that could likely produce large, severe hail. This would warrant the issuance of a severe thunderstorm warning or mention of large hail in a tornado warning.

See also[edit]

Related link[edit]

External links[edit]

References[edit]

  1. ^ a b c Lemon, Leslie R. (June 1998). "The Radar "Three-Body Scatter Spike": An Operational Large-Hail Signature" (pdf). Weather and Forecasting 13 (2): 327–340. Bibcode:1998WtFor..13..327L. doi:10.1175/1520-0434(1998)013<0327:TRTBSS>2.0.CO;2. ISSN 1520-0434. Retrieved 2011-05-25. 
  2. ^ "Hail spike". Glossary. National Weather Service Forecast Office Albany, New York. June 2009. Retrieved 2009-01-10. 
  3. ^ Kurimski, Phillip G. (August 2010). "Radar Observations of a Rare "Triple" Three-Body Scatter Spike" (pdf). National Weather Association Digest 34: 43–54. Retrieved 2012-11-15.