Human-powered trikes are powered by pedals or hand cranks. Motorized trikes use motorcycle or scooter engines, or electric motors. In the developing world, particularly Africa and Asia, tricycles tend to be used for commercial purposes: such as "pedicabs" for transport passengers, and freight trikes for making deliveries. In the West adult-sized tricycles are used primarily for recreation, shopping, and exercise. Tricycles are favoured by children and senior adults alike for their apparent stability versus a bicycle; but a conventional trike has poor dynamic lateral stability, and the rider must take care when cornering to avoid tipping the trike over.
- 1 History
- 2 Human powered tricycles
- 2.1 Design layouts
- 2.2 Recumbent tricycles
- 2.3 Conversion sets
- 2.4 Riding
- 2.5 Braking
- 2.6 Special purposes
- 2.7 Manufacturers
- 3 Motorized tricycles
- 4 Gallery
- 5 See also
- 6 References
A three-wheeled wheelchair was built in 1655 or 1680 by a disabled German man, Stephan Farffler, who wanted to be able to maintain his mobility. Since he was a watch-maker, he was able to create a vehicle that was powered by hand cranks.
In 1789, two French inventors developed a three wheeled vehicle, powered by pedals; They called it the tricycle.
In 1818, British inventor Denis Johnson patented his approach to designing tricycles.[clarification needed] In 1876, James Starley developed the Coventry Lever Tricycle, which used two small wheels on the right side and a large drive wheel on the left side; power was supplied by hand levers. In 1877, Starley developed a new vehicle he called the Coventry Rotary, which was "one of the first rotary chain drive tricycles." Starley's inventions started a tricycling craze in Britain; by 1879, there were " twenty types of tricycles and multi-wheel cycles ... produced in Coventry, England, and by 1884, there were over 120 different models produced by 20 manufacturers." The first front steering tricycle was manufactured by The Leicester Safety Tricycle Company of Leicester, England in 1881 which was brought to the market in 1882 costing £18. They also developed a folding tricycle at the same time.
Tricycles were used by riders who did not feel comfortable on the high wheelers, such as women who wore long, flowing dresses. In the UK, upright tricycles are sometimes referred to as "barrows". Many trike enthusiasts ("trikies") in the UK belong to the Tricycle Association, formed in 1929. They participate in day rides, tours and time trials. Massed start racing of upright tricycles is limited to one or two criteriums such as in Bungay, Suffolk each year.
In the Philippines, a tricycle is a for hire, public utility vehicle consisting of a motorcycle and an attached passenger sidecar; it is not to be confused with the trisikad, an unmotorised, three-wheeled pedicabs also found in the country.
Human powered tricycles
|This section does not cite any references or sources. (May 2012)|
Tricycles generally are uprights, recumbent delta or tadpole. Conversion sets can alter the design of the tricycle.
Upright resembles a two-wheeled bicycle, traditionally diamond frame, or open frame, but with either two widely spaced wheels at the back (called delta) or two wheels at the front (called tadpole). The rider straddles the frame in both delta and tadpole configurations. Steering is through a handlebar directly connected to the front wheel via a conventional bicycle fork in delta, or via a form of Ackermann steering geometry in the case of the upright tadpole.
All non-tilting trikes have stability issues and great care must be used when riding a non tilting upright trike. The center of gravity is quite high when compared to recumbent trikes. Because of this, non-tilting trikes are more prone to tipping over in corners and on uneven or sloping terrain.
Recumbent trikes' advantages (over conventional trikes) include stability (through low CoG), low drag, and ease of parking. Disadvantages (compared to bicycles) is that they are more expensive and much heavier; and Deltas are even heavier. The very low seat may make entry difficult, and on the road they may be less visible to other traffic.
A difficulty with a recumbent trike is its poor climbing ability because the rider cannot get out of the saddle and stand up on the pedals. At best, the rider may select a lower gear and use the seat back to provide extra force. Arguably, the time lost going up hills is recoverable using greater downhill speed available through the aerodynamic riding position and lower frontal area.
Recumbent delta is similar to an upright, with two wheels at the back and one at the front, but has a recumbent layout in which the rider is seated in a chair-like seat. One or both rear wheels can be driven, while the front is used for steering (the usual layout). Steering is either through a linkage, with the handlebars under the seat (USS - Under Seat Steering) or directly to the front wheel with a large handlebar (OSS - Over Seat Steering). Most delta trikes can be stored in the upright position by lifting the front wheel and letting the top of the seat rest on the ground.
Delta recumbent trikes generally have higher seats and a tighter turning radius than Tadpole recumbent trikes. The tight turning radius is necessary if you ride on trails with offset barriers or need to navigate around closely placed obstacles. The higher seat makes mounting and dismounting easier. Even with the higher seat a delta trike can be quite stable provided most of the weight (including the rider) is shifted back towards the rear wheels. Many delta trikes place the seat too far forward and that takes weight off the two rear wheels and puts more weight onto the front wheel making the trike more unstable. The Hase Kettwiesel delta trike has an 18 in (460 mm) high seat that is placed to put most of the weight onto the cambered rear wheels making it more stable.
Delta trikes are suitable to be used as manual scooters for mobility, rehab and/or exercise. The Hase Lepus Comfort is an example of a rehab delta trike designed mainly for comfort and ease of use. It has a lowered front boom and the seat can be adjusted to a height of 20 to 28 in (510 to 710 mm), which aids in mounting and dismounting. It also has rear wheel suspension for comfort. The 56 lb (25 kg) Lepus can be folded for easier storage and transportation.
The weight of a delta trike can be quite close to the weight of a tadpole trike if they are both of a similar quality and similar materials are used. The Hase Kettwiesel Allround delta trike has an aluminium frame and weighs 39.4 lbs (17.9 kg). The Catrike Road tadpole trike has an aluminium frame and weighs 37.5 lbs (17 kg).
Recumbent tadpole or reverse trike, is a recumbent design with two steered wheels at the front and one driven wheel at the back, though one model has the front wheels driven while the rear wheel steers. Steering is either through a single handlebar linked with tie rods to the front wheels' stub axle assemblies (Indirect) or with two handlebars (rather, two half-handlebars) each bolted to a steerer tube, usually through a bicycle-type headset and connected to a stub axle assembly (Direct). A single tie rod connects the left and right axle assemblies.
The tadpole trike is often used by middle-aged or retiree-age former bicyclists who are tired of the associated pains from normal upright bikes. With its extremely low center of gravity, aerodynamic layout and light weight (for trikes), tadpoles are considered the highest performance trikes.
Most Velomobiles are built in a tadpole trike configuration since a wide front and narrow rear offer superior aerodynamics to a delta trike configuration.
Not all trikes fall into one of these three classes. For example, some early pedal tricycles from the late 19th century used two wheels in tandem on one side and a larger driving wheel on the other.
Another design is an in-line three-wheeled vehicle, with two steered wheels: one at the front and the other in the middle or at the rear. It is not unusual for tricycles to have front and rear wheels of different sizes.
Tricycle conversion sets convert a bicycle to a delta or tadpole upright tricycle. The advantages of a trike conversion set include lower cost compared with new, hand built tricycles and the freedom to choose almost any donor bicycle frame.
Tricycle conversion sets tend to be heavier than a high quality, hand built, sports, touring or racing tricycle. Conversion sets can give the would-be, serious tricyclist a taste of triking before making the final decision to purchase a complete tricycle. Conversion sets can also supplied ready to be brazed onto a lightweight, steel, bicycle frame to form a complete trike. Some trike conversion sets can also be used with recumbent bicycles to form recumbent trikes.
Compared to adult trikes, children's model are simpler, without brakes nor gears, and often with crude front-drive. Tricycles are typically used by children between the ages of two and five, after which point they usually switch to a bicycle, often with training wheels (stabilisers). Child trikes can be unstable, particularly if the wheelbase or track are insufficient. Some trikes have a push bar so adults can control the trike. Child trikes may have frames made of metal, plastic, or even bamboo.
"Budget" child trikes have pedals directly driving the front wheels,for better control of the bike and braking issues but better models (such as the Pashley Pickle) have chain drive to a single rear wheel. Children's rear-drive trikes lack a differential, so one rear wheel spins free. Rear-drive is preferable to front-drive as most of the rider's weight is on the rear wheels; indeed most front drive trikes are prone to skidding when power is applied to the pedals.
Unlike adult bikes, children's trikes do not always have pneumatic tires, having instead wheels of solid rubber or hollow plastic. While this may add to the weight of the tricycle and reduces the shock-absorbing qualities, it eliminates the risk of punctures. Pull brakes are rarely fitted to front-drive trikes, but the child can slow the trike down by resisting the forward motion of the pedals.
Adults may find upright tricycles difficult to ride because of familiarity with the counter-steering required to balance a bicycle, in which the weight of the body is used during turns. The variation in the camber of the road is the principal difficulty to be overcome once basic tricycle handling is mastered. Recumbent trikes are less affected by camber and, depending on track width and riding position, capable of very fast cornering. A few trikes are designed to tilt into the corners much as a bicycle does, and this also renders them more comfortable on cambered roads. They are referred to as tilting three-wheelers (TTWs).
In the case of delta tricycles, the drive is often to just one of the rear wheels, though in some cases both wheels are driven through a differential. A double freewheel, preferably using no-backlash roller clutches, is considered superior. Trikes with a differential often use an internally geared hub as a gearbox in a 'mid drive' system. A jackshaft drive permits either single or two-wheel drive. Tadpoles generally use a bicycle's rear wheel drive and for that reason are usually lighter, cheaper and easier to replace and repair.
Recumbent trikes often brake one wheel with each hand, allowing the rider to brake one side alone to pull the trike in that direction. Some trikes use a geometry (also called center point steering) with the kingpin axis intersecting the ground directly ahead of the tire contact point, producing a normal amount of trail. This arrangement, elsewhere called "zero scrub radius" is used to mitigate the effects of one-sided braking on steering. While zero scrub can reduce steering feel and increase wandering it can also protect novices from spinning out and/or flipping.
Tadpole trikes tend also to use Ackermann steering geometry, perhaps with both front brakes operated by the stronger hand. While the KMX Kart stunt trike with this setup allows the rear brake to be operated separately, letting the rider do "bootlegger turns", the standard setup for most trikes has the front brake for each side operated by each hand. The center-of-mass of most tadpole trikes is close to the front wheels, making the rear brake less useful. The rear brake may instead be connected to a latching brake lever for use as a parking brake when stopped on a hill.
Some tricycles (such as the Christiania and the Pashley load trike) are designed for load carrying. Others are designed for racing or for comfort. Some recumbent tricycles are fully enclosed for all weather use as well as aerodynamic benefits; these are known as velomobiles. Some tricycles, such as the Zigo Leader, are designed to transport children.
Hand and foot trike
With hand and foot trikes, the rider makes a pair of front wheels change directions by shifting the center of weight and moves forward by rotating the rear wheel. The hand and foot trike can be also converted into a manual tricycle designed to be driven with both hands and both feet.[better source needed] There are also new hybrids between a handcycle, a recumbent bike and a tricycle, these bikes make it even possible to cycle with legs despite a spinal cord injury.[better source needed]
Tandem and hand trikes
Recumbent tandem trikes allow two people to ride in a recumbent position with an extra-strong backbone frame to hold the extra weight. Some allow the "captain" (the rider who steers) and "stoker" (the rider who only pedals) to pedal at different speeds. They are often made with couplers so the frames can be broken down into pieces for easier transport. Manufacturers of recumbent trikes include Greenspeed, WhizWheelz and Inspired Cycle Engineering (ICE).
Hand-crank trikes use a hand-operated crank, either as a sole source of power or a double drive with footpower from pedals and hand-power from the hand crank. The hand-power only trikes can be used by individuals who do not have the use of their legs due to a disability or an injury. They are made by companies including Greenspeed, Invacare, Quickie and Druzin.
|This section does not cite any references or sources. (May 2012)|
Urban delivery trikes are designed and constructed for transporting large loads. These trikes include a cargo area consisting of a steel tube carrier, an open or enclosed box, a flat platform, or a large, heavy-duty wire basket. These are usually mounted over one or both wheels, low behind the front wheel, or between parallel wheels at either the front or rear of the vehicle, to keep the center of gravity low. The frame and drivetrain must be constructed to handle loads several times that of an ordinary bicycle; as such, extra low gears may be added. Other specific design considerations include operator visibility and load suspension. Many, but not all, cycles used for the purpose of vending goods such as ice cream cart trikes or hot dog vending trikes are cargo bicycles.
Many freight trikes are of the tadpole configuration, with the cargo box (platform, etc.) mounted between the front wheels. India and China are significant strongholds of the rear-loading "delta" carrier trike. Freight trikes are also designed for indoor use in large warehouses or industrial plants. The advantage of using freight trikes rather than a motor vehicle is that there is no exhaust, which means that the trike can be used inside warehouses. While another option is electric golf cart-style vehicles, freight trikes are human-powered, so they do not have the maintenance required to keep batteries on golf carts charged up.
Common uses include:
- Delivery services in dense urban environments
- Food vending in high foot traffic areas (including specialist ice cream bikes)
- Transporting trade tools, including around large installations such as power stations and CERN
- Airport cargo handling
- Recycling collections
- Warehouse inventory transportation
- Food collection
- Child transport: in Amsterdam freight trikes are used primarily to carry children.
|This section does not cite any references or sources. (May 2012)|
Most cycle rickshaws, used for carrying passengers for hire, are tricycles with one steering wheel in the front and two wheels in the back supporting a seating area for one or two passengers. Cycle rickshaws often have a parasol or canopy to protect the passengers from sun and rain. These vehicles are widely used in South Asia and Southeast Asia, where rickshaw driving provides essential employment for recent immigrants from rural areas, generally impoverished men. In the 1990s and first decade of the 21st century, rickshaws have become increasingly popular in big cities in Britain, Europe and the United States, where they provide urban transportation, novelty rides, and serve as an advertising media.
Spidertrike is a recumbent cycle rickshaw that is used in central London and is operated by Eco Chariots. The trike pictured is called the SUV (Sensible Utility Vehicle) and is produced by the company Organic Engines, which operates in Florida in the United States. It is a front wheel drive tricycle, articulated behind the driver seat. The passenger is protected from rain and sun with a canopy. These pedicabs have features like double disc, hydraulic disc brakes and internal hub gears.
A treecycle is a cycle rickshaw that is used in Shanghai and invented by Chris Trees. It has a stainless steel frame and a bamboo body. The bike pictured is the cabriolet version without roof. A notable feature is the children's safety seat as used in cars and the storage compartment below the seat. Other models feature a roof or loading deck. All models are center drive tricycles with Gates carbon belt. Features include Nuvinci invariable hub gears, hydraulic disk brakes on all wheels with park-lock function, LED front- indicator- and brake-lights.
Makers of recumbent trikes include KMX; Hase (who make the Kettwiesel delta, improbably named after the British children's programme Catweazle); Inspired Cycle Engineering, who make the "Trice" range of tadpole trikes; AVD, who build the record-holding Burrows Windcheetah or Speedy, now exhibited in the Metropolitan Museum of Modern Art (MoMA); Australia's Greenspeed, one of the oldest manufacturers; Michigan-based WhizWheelz, whose ten models include a tadpole and a tandem; Big Cat HPV which builds the eight Catrike models in Florida and Sidewinder Cycle which has a front wheel drive system with rear wheel steering builds 3 models all with Electric assist capability located in California.
The largest manufacturer of recumbent trikes is Sun Bicycles of Taiwan who make both tadpole and delta trikes. The deltas are built from designs licensed from Gardner Martin's EasyRacers, a leading builder of recumbent bicycles.
|Wikimedia Commons has media related to Tricycles.|
- The Little Book of Trikes. Adam Quellin. Veloce Publishing Ltd, 1 Dec 2011
- The Hanukkah Trike. Michelle Edwards, Kathryn Mitter. Albert Whitman and Company, 1 Sep 2010
- Tilting Trike. Popular Science Jul 1980.
- Keeping Balance: A Psychologist's Experience of Chronic Illness and Disability. Katherine Cuthbert. Troubador Publishing Ltd, 3 May 2010
- Steve Greene (2011). Free on Three: The Wild World of Human Powered Recumbent Tadpole Tricycles. iUniverse. p. 21. ISBN 1462021603.
- "Medical Innovations - Wheelchair". Science Reporter 44: 397. 2007.
- "Buying children's tricycle". Essortment.com. Retrieved 2009-06-06.
- "Bamboo children's tricycle". xibambam.com. Retrieved 2011-12-12.
- "스카이휠 홈페이지에 오신 걸 환영합니다". Skywheel.kr. Retrieved 2012-11-06.
- "The BerkelBike, a hybrid between a recumbentbike and a handcycle". Berkelbike.co.uk. Retrieved 2012-11-06.