(Valved aerophone sounded by lip movement)
|Flugelhorn, cornet, bugle, natural trumpet, bass trumpet, post horn, Roman tuba, bucina, shofar, conch, lur, didgeridoo, piccolo trumpet, baritone horn, pocket trumpet|
A trumpet is a musical instrument. It is the highest register in the brass family. Trumpets are among the oldest musical instruments, dating back to at least 1500 BC. They are played by blowing air through closed lips, producing a "buzzing" sound that starts a standing wave vibration in the air column inside the instrument. Since the late 15th century they have primarily been constructed of brass tubing, usually bent twice into a rounded oblong shape.
There are several types of trumpet. The most common is a transposing instrument pitched in B♭ with a tubing length of about 148 cm. Earlier trumpets did not have valves, but modern instruments generally have either three piston valves or, more rarely, three rotary valves. Each valve increases the length of tubing when engaged, thereby lowering the pitch.
A musician who plays the trumpet is called a trumpet player or trumpeter.
The earliest trumpets date back to 1500 BC and earlier. The bronze and silver trumpets from Tutankhamun's grave in Egypt, bronze lurs from Scandinavia, and metal trumpets from China date back to this period. Trumpets from the Oxus civilization (3rd millennium BC) of Central Asia have decorated swellings in the middle, yet are made out of one sheet of metal, which is considered a technical wonder. The Moche people of ancient Peru depicted trumpets in their art going back to 300 AD. The earliest trumpets were signaling instruments used for military or religious purposes, rather than music in the modern sense; and the modern bugle continues this signaling tradition.
In medieval times, trumpet playing was a guarded craft, its instruction occurring only within highly selective guilds. The trumpet players were often among the most heavily guarded members of a troop, as they were relied upon to relay instructions to other sections of the army.
Improvements to instrument design and metal making in the late Middle Ages and Renaissance led to an increased usefulness of the trumpet as a musical instrument. The natural trumpets of this era consisted of a single coiled tube without valves and therefore could only produce the notes of a single overtone series. Changing keys required the player to change crooks of the instrument. The development of the upper, "clarino" register by specialist trumpeters—notably Cesare Bendinelli—would lend itself well to the Baroque era, also known as the "Golden Age of the natural trumpet." During this period, a vast body of music was written for virtuoso trumpeters. The art was revived in the mid-20th century and natural trumpet playing is again a thriving art around the world. Most successful modern players use a version of the natural trumpet dubbed the baroque trumpet fitted with one or more vent holes to aid in correcting out-of-tune notes in the harmonic series. The melody-dominated homophony of the classical and romantic periods relegated the trumpet to a secondary role by most major composers owing to the limitations of the natural trumpet. Berlioz wrote in 1844:
Notwithstanding the real loftiness and distinguished nature of its quality of tone, there are few instruments that have been more degraded (than the trumpet). Down to Beethoven and Weber, every composer – not excepting Mozart – persisted in confining it to the unworthy function of filling up, or in causing it to sound two or three commonplace rhythmical formulae.
The attempt to give the trumpet more chromatic freedom in its range saw the development of the keyed trumpet, but this was a largely unsuccessful venture due to the poor quality of its sound.
Although the impetus for a tubular valve began as early as 1793, it was not until 1818 that Friedrich Bluhmel and Heinrich Stölzel made a joint patent application for the box valve as manufactured by W. Schuster. The symphonies of Mozart, Beethoven, and as late as Brahms, were still played on natural trumpets. Crooks and shanks (removable tubing of various lengths) as opposed to keys or valves were standard, notably in France, into the first part of the 20th century. As a consequence of this late development of the instrument's chromatic ability, the repertoire for the instrument is relatively small compared to other instruments. The 20th century saw an explosion in the amount and variety of music written for the trumpet.
As with all brass instruments, sound is produced by blowing air through closed lips, producing a "buzzing" sound into the mouthpiece and starting a standing wave vibration in the air column inside the trumpet. The player can select the pitch from a range of overtones or harmonics by changing the lip aperture and tension (known as the embouchure). The mouthpiece has a circular rim, which provides a comfortable environment for the lips' vibration. Directly behind the rim is the cup, which channels the air into a much smaller opening (the back bore or shank) that tapers out slightly to match the diameter of the trumpet's lead pipe. The dimensions of these parts of the mouthpiece affect the timbre or quality of sound, the ease of playability, and player comfort. Generally, the wider and deeper the cup, the darker the sound and timbre.
Modern trumpets have three (or infrequently four) piston valves, each of which increases the length of tubing when engaged, thereby lowering the pitch. The first valve lowers the instrument's pitch by a whole step (2 semitones), the second valve by a half step (1 semitone), and the third valve by one-and-a-half steps (3 semitones). When a fourth valve is present, as with some piccolo trumpets, it usually lowers the pitch a perfect fourth (5 semitones). Used singly and in combination these valves make the instrument fully chromatic, i.e., able to play all twelve pitches of classical music. For more information about the different types of valves, see Brass instrument valves.
The pitch of the trumpet can be raised or lowered by the use of the tuning slide. Pulling the slide out lowers the pitch; pushing the slide in raises it. To overcome the problems of intonation and reduce the use of the slide, Renold Schilke designed the tuning-bell trumpet. Removing the usual brace between the bell and a valve body allows the use of a sliding bell; the player may then tune the horn with the bell while leaving the slide pushed in, or nearly so, thereby improving intonation and overall response.
A trumpet becomes a closed tube when the player presses it to the lips; therefore, the instrument only naturally produces every other overtone of the harmonic series. The shape of the bell makes the missing overtones audible. Most notes in the series are slightly out of tune and modern trumpets have slide mechanisms for the first and third valves with which the player can compensate by throwing (extending) or retracting one or both slides, using the left thumb and ring finger for the first and third valve slides respectively.
The most common type is the B♭ trumpet, but A, C, D, E♭, E, low F, and G trumpets are also available. The C trumpet is most common in American orchestral playing, where it is used alongside the B♭ trumpet. Its slightly smaller size gives it a brighter, more lively sound. Orchestra trumpet players are generally adept at transposing music at sight, sometimes playing music written for the A, B♭, D, E♭, E, or F trumpet on the C trumpet or B♭ trumpet.
The smallest trumpets are referred to as piccolo trumpets. The most common of these are built to play in both B♭ and A, with separate leadpipes for each key. The tubing in the B♭ piccolo trumpet is one-half the length of that in a standard B♭ trumpet. Piccolo trumpets in G, F and C are also manufactured, but are rarer. Many players use a smaller mouthpiece on the piccolo trumpet, which requires a different sound production technique from the B♭ trumpet and can limit endurance. Almost all piccolo trumpets have four valves instead of the usual three — the fourth valve lowers the pitch, usually by a fourth, to assist in the playing of lower notes and to create alternate fingerings that facilitate certain trills. Maurice André, Håkan Hardenberger, David Mason, and Wynton Marsalis are some well-known trumpet players known for their additional virtuosity on the piccolo trumpet.
Trumpets pitched in the key of low G are also called sopranos, or soprano bugles, after their adaptation from military bugles. Traditionally used in drum and bugle corps, sopranos have featured both rotary valves and piston valves.
The bass trumpet is usually played by a trombone player, being at the same pitch. Bass trumpet is played with a shallower trombone mouthpiece, and music for it is written in treble clef. The most common keys for bass trumpets are C and B♭. Both C and B♭ bass trumpets are transposing instruments sounding an octave (C) or a major ninth (B♭) lower than written.
The modern slide trumpet is a B♭ trumpet that has a slide instead of valves. It is similar to a soprano trombone. The first slide trumpets emerged during the Renaissance, predating the modern trombone, and are the first attempts to increase chromaticism on the instrument. Slide trumpets were the first trumpets allowed in the Christian church.
The historical slide trumpet was probably first developed in the late 14th century for use in alta capella wind bands. Deriving from early straight trumpets, the Renaissance slide trumpet was essentially a natural trumpet with a sliding leadpipe. This single slide was rather awkward, as the entire corpus of the instrument moved, and the range of the slide was probably no more than a major third. Originals were probably pitched in D, to fit with shawms in D and G, probably at a typical pitch standard near A=466 Hz. As no known instruments from this period survive, the details—and even the existence—of a Renaissance slide trumpet is a matter of conjecture and debate among scholars.
Some slide trumpet designs saw use in England in the 18th century.
The pocket trumpet is a compact B♭ trumpet. The bell is usually smaller than a standard trumpet and the tubing is more tightly wound to reduce the instrument size without reducing the total tube length. Its design is not standardized, and the quality of various models varies greatly. It can have a tone quality and projection unique in the trumpet world: a warm sound and a voice-like articulation. Unfortunately, since many pocket trumpet models suffer from poor design as well as cheap and sloppy manufacturing, the intonation, tone color and dynamic range of such instruments are severely hindered. Professional-standard instruments are, however, available. While they are not a substitute for the full-sized instrument, they can be useful in certain contexts. The jazz musician Don Cherry was renowned for his playing of the pocket instrument.
The herald trumpet is a B♭ trumpet with an elongated bell extending far in front of the player. Due to its showy appearance, this type of trumpet is mostly used for ceremonial events such as parades and fanfares.
There are also rotary-valve, or German, trumpets, (which are commonly used in professional European orchestras) as well as alto and Baroque trumpets.
The trumpet is often confused with its close relative the cornet, which has a more conical tubing shape compared to the trumpet's more cylindrical tube. This, along with additional bends in the cornet's tubing, gives the cornet a slightly mellower tone, but the instruments are otherwise nearly identical. They have the same length of tubing and, therefore, the same pitch, so music written for cornet and trumpet is interchangeable. Another relative, the flugelhorn, has tubing that is even more conical than that of the cornet, and an even richer tone. It is sometimes augmented with a fourth valve to improve the intonation of some lower notes.
|This section does not cite any references or sources. (February 2010)|
On any modern trumpet, cornet, or flugelhorn, pressing the valves indicated by the numbers below produces the written notes shown. "OPEN" means all valves up, "1" means first valve, "1-2" means first and second valve simultaneously, and so on. The concert pitch that sounds depends on the transposition of the instrument. Engaging the fourth valve, if present, drops any of these pitches by a perfect fourth as well. Within each overtone series, the different pitches are attained by changing the embouchure, or lip-aperture size and "firmness". Standard fingerings above high C are the same as for the notes an octave below (C♯ is 1-2, D is 1, etc.)
Each overtone series on the trumpet begins with the first overtone—the fundamental of each overtone series cannot be produced except as a pedal tone. Notes in parentheses are the sixth overtone, representing a pitch with a frequency of seven times that of the fundamental; while this pitch is close to the note shown, it is slightly flat relative to equal temperament, and use of those fingerings is generally avoided.
The fingering schema arises from the length of each valve's tubing (a longer tube produces a lower pitch). Valve "1" increases the tubing length enough to lower the pitch by one whole step, valve "2" by one half step, and valve "3" by one and a half steps. This scheme and the nature of the overtone series create the possibility of alternate fingerings for certain notes. For example, third-space "C" can be produced with no valves engaged (standard fingering) or with valves 2-3. Also, any note produced with 1-2 as its standard fingering can also be produced with valve 3 - each drops the pitch by 1-1/2 steps. Alternate fingerings may be used to improve facility in certain passages, or to aid in intonation. Extending the third valve slide when using the fingerings 1-3 or 1-2-3 further lowers the pitch slightly to improve intonation.
The standard trumpet range extends from the written F♯ immediately below Middle C up to about three octaves higher. Traditional trumpet repertoire rarely calls for notes beyond this range, and the fingering tables of most method books peak at the high C, two octaves above middle C. Several trumpeters have achieved fame for their proficiency in the extreme high register, among them Maynard Ferguson, Cat Anderson, Dizzy Gillespie, Doc Severinsen, and more recently Wayne Bergeron, Thomas Gansch, James Morrison and Arturo Sandoval. It is also possible to produce pedal tones below the low F♯, which is a device commonly employed in contemporary repertoire for the instrument.
Contemporary music for the trumpet makes wide uses of extended trumpet techniques.
Flutter tonguing: The trumpeter rolls the tip of the tongue to produce a 'growling like' tone. It is achieved as if one were rolling an R in the Spanish language. This technique is widely employed by composers like Berio and Stockhausen.
Growling: Simultaneously humming while playing a note creates two sets of vibrations that interfere with each other and create a characteristic 'growling' sound. Many jazz players use the technique—which is different from flutter-tonguing, where the tongue modifies the sound.
Double tonguing: The player articulates using the syllables ta-ka ta-ka ta-ka
Triple tonguing: The same as double tonguing, but with the syllables ta-ta-ka ta-ta-ka ta-ta-ka or ta-ka-ta ta-ka-ta.
Doodle tongue: The trumpeter tongues as if saying the word doodle. This is a very faint tonguing similar in sound to a valve tremolo.
Glissando: Trumpeters can slide between notes by depressing the valves halfway and changing the lip tension. Modern repertoire makes extensive use of this technique.
Vibrato: It is often regulated in contemporary repertoire through specific notation. Composers can call for everything from fast, slow or no vibrato to actual rhythmic patterns played with vibrato.
Pedal tone: Composers have written for two-and-a-half octaves below the low F♯, which is at the bottom of the standard range. Extreme low pedals are produced by slipping the lower lip out of the mouthpiece. Claude Gordon assigned pedals as part of his trumpet practice routines, that were a systematic expansion on his lessons with Herbert L. Clarke. The technique was pioneered by Bohumir Kryl.
Microtones: Composers such as Scelsi and Stockhausen have made wide use of the trumpet's ability to play microtonally. Some instruments feature a fourth valve that provides a quarter-tone step between each note.
Mute belt: Karlheinz Stockhausen pioneered the use of a mute belt, worn around the player's waist, to enable rapid mute changes during pieces. The belt allows the performer to make faster and quieter mute changes, as well as enabling the performer to move around the stage.
Valve tremolo: Many notes on the trumpet can be played in several different valve combinations. By alternating between valve combinations on the same note, a tremolo effect can be created. Berio makes extended use of this technique in his Sequenza X.
Noises: By hissing, clicking, or breathing through the instrument, the trumpet can be made to resonate in ways that do not sound at all like a trumpet. Noises may require amplification.
Preparation: Composers have called for trumpeters to play under water, or with certain slides removed. It is increasingly common for composers to specify all sorts of preparations for trumpet. Extreme preparations involve alternate constructions, such as double bells and extra valves.
Singing: Composers such as Robert Erickson and Mark-Anthony Turnage have called for trumpeters to sing during the course of a piece, often while playing. It is possible to create a multiphonic effect by singing and playing different notes simultaneously.
Split tone: Trumpeters can produce more than one tone simultaneously by vibrating the two lips at different speeds. The interval produced is usually an octave or a fifth.
Lip Trill or Shake: By rapidly varying lip tension, but not changing the depressed valves, the pitch varies quickly between adjacent harmonics. These are usually done, and are more straightforward to execute, in the upper register.
Instruction and method books
One trumpet method publication of long-standing popularity is Jean-Baptiste Arban's Complete Conservatory Method for Trumpet (Cornet). Other well-known method books include Technical Studies by Herbert L. Clarke, Grand Method by Louis Saint-Jacome,Daily Drills and Technical Studies by Max Schlossberg, and methods by Ernest S. Williams, Claude Gordon, Charles Colin, James Stamp, and Louis Davidson. Vassily Brandt's Orchestral Etudes and Last Etudes is used in many college and conservatory trumpet studios, containing drills on permutations of standard orchestral trumpet repertoire, transpositions, and other advanced material. A common method book for beginners is the Walter Beeler's Method for the Cornet, and there have been several instruction books written by virtuoso Allen Vizzutti.
In early jazz, Louis Armstrong was well known for his virtuosity and his improvisations on the Hot Five and Hot Seven recordings. Miles Davis is widely considered one of the most influential musicians of the 20th century—his style was distinctive and widely imitated. Davis' phrasing and sense of space in his solos have been models for generations of jazz musicians. Dizzy Gillespie was a gifted improviser with an extremely high range, building on the style of Roy Eldridge but adding new layers of harmonic complexity. Gillespie had an enormous impact on virtually every subsequent trumpeter, both by the example of his playing and as a mentor to younger musicians. Maynard Ferguson came to prominence playing in Stan Kenton's orchestra, before forming his own band in 1957. He was noted for being able to play accurately in a remarkably high register.
Notable classical trumpeters include Maurice André, Armando Ghitalla, Alison Balsom, Hakan Hardenberger, Tine Thing Helseth, Adolph "Bud" Herseth, Malcolm McNab, Rafael Méndez, Maurice Murphy, Sergei Nakariakov, Uan Rasey, Charles Schlueter, Philip Smith, William Vacchiano, Allen Vizzutti, and Roger Voisin.
Notable jazz trumpet players include Nat Adderley, Bud Brisbois, Randy Brecker, Chet Baker, Clifford Brown, Allan Botschinsky, Donald Byrd, Doc Cheatham, Don Cherry, Miles Davis, Kenny Dorham, Dave Douglas, Ziggy Elman, Jon Faddis, Maynard Ferguson, Tim Hagans, Roy Hargrove, Tom Harrell, Erskine Hawkins, Al Hirt, Freddie Hubbard, Roger Ingram, Harry James, Ibrahim Maalouf, Chuck Mangione, Wynton Marsalis, Billy May, Blue Mitchell, Lee Morgan, Fats Navarro, Nicholas Payton, Louis Prima, Uan Rasey, Claudio Roditi, Wallace Roney, Arturo Sandoval, Manfred Schoof, Bobby Shew, Doc Severinsen, Woody Shaw, Markus Stockhausen, Clark Terry, Allen Vizzutti, Cootie Williams, and Snooky Young.
The American orchestral trumpet sound is largely attributable to Adolph "Bud" Herseth's 53-year tenure with the Chicago Symphony Orchestra. Though he was not as prolific a teacher as some of his peers, his widely recorded sound became the standard for American orchestras.
The repertoire for the natural trumpet and cornetto is extensive. This music is commonly played on modern piccolo trumpets, although there are many highly proficient performers of the original instruments. This vast body of repertoire includes the music of Gabrieli, Monteverdi, Bach, Vivaldi, and countless other composers. Because the overtone series does not allow stepwise movement until the upper register, the tessitura for this repertoire is very high.
Joseph Haydn's Trumpet Concerto was one of the first for a chromatic trumpet, a fact shown off by some stepwise melodies played low in the instrument's range. Johann Hummel wrote the other great Trumpet Concerto of the Classical period, and these two pieces are the cornerstone of the instrument's repertoire. Written as they were in the infancy of the chromatic trumpet, they reflect only a minor advancement of the trumpet's musical language, with Hummel's being the more adventurous piece by far. Both concerti were written for the Austrian virtuoso Anton Weidinger.
Trumpets in art
Trumpet-Player in front of a Banquet, Gerrit Dou, c.1660-1665
- Compositions for trumpet
- Keyed trumpet
- List of trumpeters
- Muted trumpet
- Natural trumpet
- Piccolo trumpet
- Trumpet repertoire
- Wind controller
- "History of the Trumpet". petrouska.com. Retrieved 2008-05-03.
- Edward Tarr, The Trumpet (Portland, Oregon: Amadeus Press, 1988), 20-30.
- "Trumpet with a swelling decorated with a human head," Musée du Louvre
- Berrin, Katherine & Larco Museum. The Spirit of Ancient Peru:Treasures from the Museo Arqueológico Rafael Larco Herrera. New York: Thames and Hudson, 1997.
- "Chicago Symphony Orchestra – Glossary – Brass instruments". cso.org. Retrieved 2008-05-03.
- Berlioz, Hector (1844). Treatise on modern Instrumentation and Orchestration. Edwin F. Kalmus, NY, 1948.
- "Trumpet, Brass Instrument". dsokids.com. Retrieved 2008-05-03.
- Dr. Colin Bloch (August 1978). "The Bell-Tuned Trumpet". Retrieved 25 February 2010.
- D. J. Blaikley, "How a Trumpet Is Made. I. The Natural Trumpet and Horn", The Musical Times, January 1, 1910, p. 15.
- Tarr[full citation needed]
- "IngentaConnect More about Renaissance slide trumpets: fact or fiction?". ingentaconnect.com. Retrieved 2008-05-03.
- "JSTOR: Notes, Second Series, Vol. 54, No. 2, (1997 ), pp. 484-485". JSTOR 899543.
- Joseph Wheeler, "Review: Edward H. Tarr, Die Trompete" The Galpin Society Journal, Vol. 31, May, 1978, p. 167.
- Arban, Jean-Baptiste (1894, 1936, 1982). Arban's Complete Conservatory Method for trumpet. Carl Fischer, Inc. ISBN 0-8258-0385-3.
- Herbert L. Clarke (1984). Technical Studies for the Cornet, C. Carl Fischer, Inc. ISBN 0-8258-0158-3.
- Colin, Charles and Advanced Lip Flexibilities.[full citation needed]
- Vassily Brandt Orchestral Etudes and Last Etudes. ISBN 0-7692-9779-X.
- "Miles Davis, Trumpeter, Dies; Jazz Genius, 65, Defined Cool". nytimes.com. Retrieved 2008-05-03.
- "Ferguson, Maynard". Encyclopedia of Music in Canada. The Canadian Encyclopedia. Retrieved 2008-01-02.
- Keith Anderson, liner notes for Naxos CD 8.550243, Famous Trumpet Concertos, "Haydn's concerto, written for Weidinger in 1796, must have startled contemporary audiences by its novelty. At the first performance of the new concerto in Vienna in 1800 a trumpet melody was heard in a lower register than had hitherto been practicable."
- Barclay, Robert. The Art of the Trumpet-Maker: The Materials, Tools and Techniques of the Seventeenth and Eighteenth Centuries in Nuremberg , Oxford University Press, 1992, ISBN 0-19-816223-5
- Bate, Philip. The Trumpet and Trombone: An Outline of Their History, Development, and Construction, Ernest Benn, 1978, ISBN 0-393-02129-7
- Brownlow, James Arthur. The Last Trumpet: A History of the English Slide Trumpet, Pendragon Press, 1996, ISBN 0-945193-81-5
- Campos, Frank Gabriel. Trumpet Technique, Oxford University Press, 2005, ISBN 0-19-516692-2
- Cassone, Gabriele. The Trumpet Book, pages 352+CD, illustrated, Zecchini Editore, 2009, ISBN 88-87203-80-6
- Sherman, Roger. Trumpeter's Handbook: A Comprehensive Guide to Playing and Teaching the Trumpet, Accura Music, 1979, ISBN 0-918194-02-4
- Skardinski, Stan. You Can't Be Timid With a Trumpet: Notes from the Orchestra, Lothrop, Lee & Shepard Books, 1980, ISBN 0-688-41963-1
- Smithers, Don L. The Music and History of the Baroque Trumpet Before 1721, Syracuse University Press, 1973, ISBN 0-8156-2157-4.
|Wikimedia Commons has media related to Trumpet.|
|Look up trumpet in Wiktionary, the free dictionary.|
|Wikisource has the text of the 1911 Encyclopædia Britannica article Trumpet.|
- International Trumpet Guild, international trumpet players' association with online library of scholarly journal back issues, news, jobs and other trumpet resources.
- Trumpet Live,— an exclusive video pedagogy website for trumpet featuring the teachings and performance of leading international trumpet players.
- Trumpet Playing Articles by Jeff Purtle, protege of Claude Gordon
- Trumpet Players' International Network is the oldest and largest email list with members from all parts of world.
- Jay Lichtmann's trumpet studies Scales and technical trumpet studies.
- Dallas Music — a non-profit musical instrument resource site
- PDF (43.2 KiB)