United States Air Force Honor Guard
|This article relies largely or entirely upon a single source. (May 2013)|
The Honor Guard's primary mission is to represent the U.S. Air Force at all public and official ceremonies within the National Capital Region and abroad when directed by the Military District of Washington, Headquarters U.S. Air Force or subordinate commands. Ceremonies include those for visiting dignitaries and military officials, funerals for deceased Air Force personnel and their dependents, wreath-laying ceremonies at the Tomb of the Unknowns at Arlington National Cemetery, White House arrival ceremonies, receptions, and other state and military occasions which comprise the Honor Guards of all five armed services (U.S. Army, U.S. Navy, U.S. Marine Corps, U.S. Air Force and U.S. Coast Guard). A posting to this highly selective unit is considered a special duty assignment, meaning that Air Force members world-wide from all career fields can apply for this duty. If selected, they are withdrawn from their career fields and reassigned to Bolling AFB for a standard tour of duty (normally 3 years; basic trainees are assigned for 2). A USAF HG member is traditionally referred to as a Ceremonial Guardsman.
USAF HG's origins can be traced to May 1948 when Headquarters Command, United States Air Force, directed the creation of an elite ceremonial unit comparable to that of the other services. A ceremonial unit was activated within the 1100th Air Police Squadron at Bolling AFB with the responsibility of maintaining an Air Force ceremonial capability in the National Capital Region. The USAF HG officially became an Air Force squadron in 1972.
Ceremonial Flight Elements
Like every squadron in the U.S. Air Force, the USAF HG is composed of flights, which in turn, are composed of elements. The "workhorse" of the unit is Ceremonial Flight. It is the primary element called upon to supply personnel for all ceremonies that the unit participates in. It is composed of three elements: Colors, Bearers, and Firing Party.
The mission of the Colors element is to display and bear the American flag (known as the National), Air Force flag and the flags of the native countries of visiting dignitaries at Air Force events and as part of the other services' honor guards for Joint Service ceremonies. A Colors element member is also responsible for carrying the USAF Honor Guard guidon. A color team usually comprises four individuals: the Non-Commissioned Officer-in-charge (NCOIC) of the team (known as the NCT) who carries the National and commands the team, the Air Force flag bearer (known as the USAF), and two rifle guards whose responsibility is to guard the flags. These two individuals are armed with Springfield M1903 rifles (or "O3's"). Color teams evolved from the custom of carrying the colors onto the battlefield during the 18th and 19th centuries to identify the location of the combatants and to inspire pride and confidence in them. The battle streamers that hang from the top of the Air Force flagstaff symbolically represent every conflict and campaign that the Air Force has participated in since its inception in 1907 as the U.S. Army Aeronautical Division. The streamers weigh in at nearly 40 pounds in addition to the weight of the flag and the staff. There are ceremonies in which additional flags are carried as well which can increase the size of a color team to as many as eight members or more.
The mission of the Bearers element is to participate in Air Force, Joint Service, and state funerals by bearing the remains of deceased service members, dependents, and senior and/or national leaders to their gravesites. The custom of body bearers (or pallbearers) began on the battlefield when it was necessary to gather the dead for burial. As the only wheeled vehicles available on the battlefield were usually artillery caissons, they were used transport the deceased to the grave, a custom which is practiced today in Arlington National Cemetery. As there were usually a lack of stretchers to carry the dead off the field, the practice of using flags to carry remains originated during the Napoleonic Wars and is represented today when a casket is draped with the American flag. The caskets generally weigh from 450 to 600 pounds, but there are exceptions, when some caskets have been known to exceed 900 pounds. The distance from caisson to grave usually comprises at least 60 yards. Once the gravesite is reached, the bearers' duties continue by holding the flag taut and level over the casket until the service is complete. The flag is then folded by the bearers and presented to the next-of-kin of the deceased.
The mission of the Firing Party element is to render three volleys of rifle fire at the gravesite to honor the deceased during funeral services. It is commonly thought that as there are seven members on the party (the NCOIC of the firing party is the eighth member and is known as the "NFP") with each firing three rounds, that this composes a "21-gun salute". However, this is incorrect. 21 rounds just happen to be the number of rounds fired. The firing party's goal is to fire three volleys in perfect unison (these are known as "boomers"). The custom of firing three volleys began as a way of signaling the opposing side that the battlefield dead had been retrieved and that the fighting could resume. Seven members on the firing party is thought to originate from the idea that seven is a lucky number. Three volleys being fired is thought to symbolize the Father, the Son, and the Holy Spirit of the Christian faith. It was also believed that the sound of the gunfire scared away evil spirits from the gravesite and paved a way for the soul to follow to heaven. As time passed, these volleys became an official military custom that survives to this day.
A little-known part of Honor Guard history is the Combat Guard. In early 2001, General John W. Handy, then-Air Force Vice Chief-of-Staff, directed that the unit be assigned a wartime contingency mission. Shortly thereafter, under the guidance of USAF HG commander Lieutenant Colonel Bradley Spacy, thirteen Ceremonial Guardsmen (four NCOs and nine Airmen) were selected to stand-up a squad consisting of three four-man fire teams and a squad leader. Its mission was to augment the 11th Security Forces Squadron (11SFS) at Bolling AFB in the event that extra manpower was needed to secure and/or defend the base. In March of that same year, the squad traveled to Fort Dix, New Jersey to attend the Air Base Ground Defense Squad Operations Course where they received two weeks of mission-specific infantry training. At their graduation ceremony, General Handy personally presented certificates to each squad member. Handy's foresight proved to be well-founded; six months later the squad was activated when the Pentagon was attacked by terrorists on September 11, 2001. For approximately forty-five days, the squad was attached to the 11SFS and augmented their forces, helping secure and defend the base against possible follow-on attacks. The squad is no longer active, however this small group's dedication to duty during a time of national emergency cannot be forgotten.
Unit Emblems, Guidon and Symbology
The unit emblem was designed in 1976 by former superintendent Malcolm Haines and drawn by Senior Airman Scott Stewart. It is composed of crossed M-1 Garand rifles with fixed bayonets silhouetted over a silver/gray Roman helmet adorned with a scarlet red horsehair festoon on a field of ultramarine blue with the attached organization motto. The Roman helmet is symbolic of the Praetorian Guard of the Roman Empire---the original Honor Guard of the Western World---whose duty it was to protect the reigning emperor. The red festoon denotes courage and valor. The silver/gray of the helmet proper represents the excellence expected of all USAF HG personnel. The crossed M-1 rifles historically denote the unit's primary weapon (the M-14 rifle became the unit's primary weapon in 2002; however the Drill Team still continues to use the M-1). The ultramarine blue background symbolizes the primary theater of Air Force operations - the sky and beyond. The attached motto, "To Honor With Dignity" best describes the unit's elite mission. The emblem is the centerpiece of the functional badges that are worn by USAF HG personnel as well as Base Honor Guard members with slight differences between the two (see bottom of page in the "see also" section).
Historically, the purpose of a guidon was to mark the position of a particular unit on the battlefield. Today, its function is to represent a particular unit during ceremonies. The USAF HG guidon is unique in comparison to other Air Force squadron guidons in that it is two-toned rather than one solid color. In 2000, Technical Sergeant Timothy Carney was tasked by Captain Leo Lawson, then-officer-in-charge of Ceremonial Flight, to develop a design for a guidon that would distinctly represent the USAF HG during ceremonies. The design is derived from the U.S. Army cavalry guidon of the 19th century. The blue and silver-white of the guidon represent the Air Force's colors---blue for the sky and silver-white for clouds and striking power in the medium of the air. The eagle represents the American eagle while the words "USAF Honor Guard" are self-explanatory.
The emblem of the Colors element, created in 2000, incorporates the spade-shaped finial (commonly called the warhead) as well as other symbols associated with the Colors element. Their motto is "Leading the Charge". No image of the emblem is available at this time.
The emblem of the Bearers element was created by an unidentified Bearer in 2000. Symbolically, the emblem represents a casket draped with an American flag, flanked on both sides by eight stars which represent the number of body bearers required for a funeral with full military honors and the use of a caisson. The motto "Last To Let You Down" represents the loyalty and honor that the Bearers element accords to a fallen service member as well as literally letting (setting) the casket of the deceased down at the gravesite.
The emblem of the Firing Party element was created in 2000 by Technical Sergeant Timothy Carney, then-NCOIC of the Firing Party element. Symbolically, the colors of yellow, black and gray represent the components of gunpowder: yellow for sulphur, black for charcoal and gray for potassium nitrate. The crossed rifles represent the primary weapon of the Firing Party and the three seven-pointed star-bursts represent three volleys of seven fired in unison. The twenty-one stars that encircle the emblem represent twenty-one rounds fired in honor of a fallen service-member. The motto, "Excolo Per Ignis" is Latin for "to honor by fire" which is the primary duty of the Firing Party element.
Base Honor Guard
Until 1995, the U.S. Air Force used the base detail method to provide military funeral honors for those who died in the geographic area that a particular Air Force base was responsible for. The Mortuary Affairs office would routinely task either the base's security police squadron or fledgling Honor Guard detachment with the burial detail. However, these detail members usually had little to no experience with burials, thus the quality of the ceremony suffered. To correct this, the USAF HG established the Protocol, Honors and Ceremonies course and instituted the Base Honor Guard (BHG) program in 1995. This provided BHG programs with written guidance and standardization on funeral procedures (as well as other military ceremonies) and standardized the wear of the ceremonial uniform at all Air Force bases world-wide. BHG members are Airmen, non-commissioned officers (sergeants) and officers assigned to the same base, but in different career fields. Although BHG members are not members of the USAF HG, a majority of them apply and are frequently selected for USAF HG duty due to their acquired experience and exceptional military bearing. The uniform worn by BHG and USAF HG members is the same with the following exceptions: USAF HG members wear a white shirt, full-size anodized medals, a chrome functional badge and a shoulder arc worded "USAF HONOR GUARD". BHG members wear standard Air Force blue shirts, service ribbons, a colorized enamel functional badge and a shoulder arc worded "BASE HONOR GUARD". Depending on the circumstances, a contingent of Airmen from an Air Force base may travel to Washington D.C. for formal training conducted by USAF HG's training flight or vice-versa.
Before it was revised in 1999, the original USAF HG Creed, written by Staff Sergeant Al Turner in the 1980s, epitomized the pride, mindset and professionalism of every Ceremonial Guardsman; in order to preserve the history and tradition of the unit, it is important that it be presented here in its entirety: I am a proud member of the United States Air Force Honor Guard. My standards of conduct and high level of professionalism place me above all others in my service. I have earned the right to wear the ceremonial uniform, one which is honored in a rich tradition and history. I am superbly conditioned to perfect all movements throughout every drill and ceremony. The level in which I perform will never be dictated by the type of ceremony, the severity of the temperature, nor the size of the crowd. I am constantly driven to excel by a strong sense of dedication that runs deeper than patriotism. While on ceremonies, I stand sharp and crisp, motionless by choice, for I have voluntarily chosen to represent every member past and present of the United States Air Force. I am a Ceremonial Guardsman.
- This text was taken from AFPAM 36-2241V1, pp. 120–121.1