Water pollution

Page semi-protected
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by EMsmile (talk | contribs) at 09:36, 3 February 2022 (improved link). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Raw sewage and industrial waste in the New River as it passes from Mexicali (Mexico) to Calexico, California

Water pollution (or aquatic pollution) is the contamination of water bodies, usually as a result of human activities, in such a manner that negatively affects its legitimate uses.[1]: 6  Water pollution reduces the ability of the body of water to provide the ecosystem services that it would otherwise provide. Water bodies include for example lakes, rivers, oceans, aquifers, reservoirs and groundwater. Water pollution results when contaminants are introduced into these water bodies. Water pollution can usually be attributed to one of four sources: sewage, industry, agriculture, and urban runoff including stormwater.[2] For example, releasing inadequately treated wastewater into natural waters can lead to degradation of these aquatic ecosystems. Water pollution can also lead to water-borne diseases for people using polluted water for drinking, bathing, washing or irrigation.[3] Supplying clean drinking water is an important ecosystem service provided by some freshwater systems, but approximately 785 million people in the world do not have access to clean drinking water because of pollution.[4]

Water pollution can be classified as surface water pollution (for example lakes, streams, estuaries, and parts of the ocean in marine pollution) or groundwater pollution. Sources of water pollution are either point sources or non-point sources. Point sources have one identifiable cause, such as a storm drain, a wastewater treatment plant or an oil spill. Non-point sources are more diffuse, such as agricultural runoff.[5] Pollution is the result of the cumulative effect over time.

Pollution may take the form of toxic substances (e.g., oil, metals, plastics, pesticides, persistent organic pollutants, industrial waste products), stressful conditions (e.g., changes of pH, hypoxia or anoxia, stressful temperatures, excessive turbidity, unpleasant taste or odor, and changes of salinity), or pathogenic organisms. Contaminants may include organic and inorganic substances. Heat can also be a pollutant, and this is called thermal pollution. A common cause of thermal pollution is the use of water as a coolant by power plants and industrial manufacturers.

Control of water pollution requires appropriate infrastructure and management plans as well as legislation. Technology solutions can include improving sanitation, sewage treatment, industrial wastewater treatment, agricultural wastewater treatment, erosion control, sediment control and control of urban runoff (including stormwater management). Effective control of urban runoff includes reducing speed and quantity of flow.

Definition

Pollution in the Lachine Canal, Canada

A practical definition of water pollution is: "Water pollution is the addition of substances or energy forms that directly or indirectly alter the nature of the water body in such a manner that negatively affects its legitimate uses".[1]: 6  Therefore, pollution is associated with concepts attributed to humans, namely the negative alterations and the uses of the water body. Water is typically referred to as polluted when it is impaired by anthropogenic contaminants. Due to these contaminants it either does not support a human use, such as drinking water, or undergoes a marked shift in its ability to support its biotic communities, such as fish.

Contaminants and their sources

Overview

If the water pollution stems from sewage (municipal wastewater), the main pollutants are: suspended solids, biodegradable organic matter, nutrients and pathogenic organisms.[1]: 6 

Pollutants and their effects (sources of these pollutants are municipal and industrial wastewater, urban runoff, agricultural and pasture activities). Adapted from [1]: 7 
Pollutant Main representative parameter Possible effect of the pollutant
Suspended solids Total suspended solids
Biodegradable organic matter Biological oxygen demand
  • Oxygen consumption
  • Death of fish
  • Septic conditions
Nutrients
Pathogens Waterborne diseases
Non-biodegradable organic matter
Inorganic dissolved solids

Pathogens from sewage and agriculture

Poster to teach people in South Asia about human activities leading to the pollution of water sources

Disease-causing microorganisms are referred to as pathogens. The major groups of pathogenic organisms are: (a) bacteria, (b) viruses, (c) protozoans and (d) helminths.[1]: 47  In practice, indicator organisms are used to investigate pathogenic pollution of water because the detection of pathogenic organisms in water sample is difficult and costly, because of their low concentrations. The indicators (bacterial indicator) of fecal contamination of water samples most commonly used are: total coliforms (TC), fecal coliforms (FC) or thermotolerant coliforms, escherichia coli (EC).[1]: 47 

Pathogens can produce waterborne diseases in either human or animal hosts.[7] Some microorganisms sometimes found in contaminated surface waters that have caused human health problems include: Burkholderia pseudomallei, Cryptosporidium parvum, Giardia lamblia, Salmonella, norovirus and other viruses, parasitic worms including the Schistosoma type.[8]

The source of high levels of pathogens in water bodies can be from human feces (due to open defecation), sewage, blackwater, manure that has found its way into the water body. The cause for this can be lack of sanitation or poorly functioning on-site sanitation systems (septic tanks, pit latrines), sewage treatment plants without disinfection steps, sanitary sewer overflows and combined sewer overflows (CSOs)[9] during storm events and intensive agriculture (poorly managed livestock operations).

Muddy river polluted by sediment.

Non-biodegradable organic compounds

Non-biodegradable organic substances can enter water bodies from a variety of sources, for example industrial wastewater. Many of these chemical substances are toxic.[10]: 229 

The following compounds can all reach water bodies via raw sewage or even treated sewage discharges:

Persistent organic pollutants

Persistent organic pollutants (POPs) are organic compounds that are resistant to degradation through chemical, biological, and photolytic processes.[20] They are toxic and adversely affect human health and the environment around the world. Because they can be transported by wind and water, most POPs generated in one country can and do affect people and wildlife far from where they are used and released.

Environmental persistent pharmaceutical pollutants

The environmental effect of pharmaceuticals and personal care products (PPCPs) is being investigated since at least the 1990s. PPCPs include substances used by individuals for personal health or cosmetic reasons and the products used by agribusiness to boost growth or health of livestock. More than twenty million tons of PPCPs are produced every year.[21] The European Union has declared pharmaceutical residues with the potential of contamination of water and soil to be "priority substances".[3]

Inorganic contaminants

Bauxite residue is an industrial waste that is dangerously alkaline and can lead to water pollution if not managed appropriately (photo from Stade, Germany).

Inorganic water pollutants include for example:

Solid waste and plastics

Solid waste can enter water bodies through untreated sewage, combined sewer overflows, urban runoff, people discarding garbage into the environment, wind carrying municipal solid waste from landfills and so forth. This results in macroscopic pollution– large visible items polluting the water– but also microplastics pollution that is not directly visible. The terms marine debris and marine plastic pollution are used in the context of pollution of oceans.

Microplastics persist in the environment at high levels, particularly in aquatic and marine ecosystems, where they cause water pollution.[23] 35% of all ocean microplastics come from textiles/clothing, primarily due to the erosion of polyester, acrylic, or nylon-based clothing, often during the washing process.[24]

Various contaminants from industrial wastewater

If the pollution stems from industrial wastewater, then pollutants of concern may include:

Types of surface water pollution

A polluted river draining an abandoned copper mine on Anglesey

Pollution of rivers, lakes and oceans

Surface water pollution includes pollution of rivers, lakes and oceans. A subset of surface water pollution is marine pollution which affects the oceans. Nutrient pollution refers to contamination by excessive inputs of nutrients.

Globally, about 4.5 billion people do not have safely managed sanitation as of 2017, according to an estimate by the Joint Monitoring Programme for Water Supply and Sanitation.[4] Lack of access to sanitation is concerning and often leads to water pollution, e.g. via the practice of open defecation: during rain events or floods, the human feces are moved from the ground where they were deposited into surface waters. Simple pit latrines may also get flooded during rain events.

Marine pollution

Marine pollution occurs when substances used or spread by humans, such as industrial, agricultural and residential waste, particles, noise, excess carbon dioxide or invasive organisms enter the ocean and cause harmful effects there. The majority of this waste (80%) comes from land-based activity, although marine transportation significantly contributes as well.[29] It is a combination of chemicals and trash, most of which comes from land sources and is washed or blown into the ocean. This pollution results in damage to the environment, to the health of all organisms, and to economic structures worldwide.[30] Since most inputs come from land, either via the rivers, sewage or the atmosphere, it means that continental shelves are more vulnerable to pollution. Air pollution is also a contributing factor by carrying off iron, carbonic acid, nitrogen, silicon, sulfur, pesticides or dust particles into the ocean.[31] The pollution often comes from nonpoint sources such as agricultural runoff, wind-blown debris, and dust. These nonpoint sources are largely due to runoff that enters the ocean through rivers, but wind-blown debris and dust can also play a role, as these pollutants can settle into waterways and oceans.[32] Pathways of pollution include direct discharge, land runoff, ship pollution, bilge pollution, atmospheric pollution and, potentially, deep sea mining.

Nutrient pollution

Nutrient pollution caused by Surface runoff of soil and fertilizer during a rain storm
Nutrient pollution, a form of water pollution, refers to contamination by excessive inputs of nutrients. It is a primary cause of eutrophication of surface waters (lakes, rivers and coastal waters), in which excess nutrients, usually nitrogen or phosphorus, stimulate algal growth.[33] Sources of nutrient pollution include surface runoff from farm fields and pastures, discharges from septic tanks and feedlots, and emissions from combustion. Raw sewage is a large contributor to cultural eutrophication since sewage is high in nutrients. Releasing raw sewage into a large water body is referred to as sewage dumping, and still occurs all over the world. Excess reactive nitrogen compounds in the environment are associated with many large-scale environmental concerns. These include eutrophication of surface waters, harmful algal blooms, hypoxia, acid rain, nitrogen saturation in forests, and climate change.[34]

Thermal pollution

The Brayton Point Power Station in Massachusetts discharges heated water to Mount Hope Bay.
Thermal pollution, sometimes called "thermal enrichment", is the degradation of water quality by any process that changes ambient water temperature. Thermal pollution is the rise or drop in the temperature of a natural body of water caused by human influence. Thermal pollution, unlike chemical pollution, results in a change in the physical properties of water. A common cause of thermal pollution is the use of water as a coolant by power plants and industrial manufacturers.[35] Urban runoffstormwater discharged to surface waters from rooftops, roads, and parking lots—and reservoirs can also be a source of thermal pollution.[36] Thermal pollution can also be caused by the release of very cold water from the base of reservoirs into warmer rivers.

Elevated water temperatures decrease oxygen levels (due to lower levels of dissolved oxygen, as gases are less soluble in warmer liquids), which can kill fish (which may then rot) and alter food chain composition, reduce species biodiversity, and foster invasion by new thermophilic species.[37]: 179 [10]: 375 

Biological pollution

The introduction of aquatic invasive organisms is a form of water pollution as well. It causes biological pollution.[38]

Groundwater pollution

Groundwater pollution (also called groundwater contamination) occurs when pollutants are released to the ground and make their way into groundwater. This type of water pollution can also occur naturally due to the presence of a minor and unwanted constituent, contaminant, or impurity in the groundwater, in which case it is more likely referred to as contamination rather than pollution. Groundwater pollution can occur from on-site sanitation systems, landfill leachate, effluent from wastewater treatment plants, leaking sewers, petrol filling stations, hydraulic fracturing (fracking) or from over application of fertilizers in agriculture. Pollution (or contamination) can also occur from naturally occurring contaminants, such as arsenic or fluoride.[39] Using polluted groundwater causes hazards to public health through poisoning or the spread of disease (water-borne diseases).

Pollution from point sources

Point source water pollution refers to contaminants that enter a waterway from a single, identifiable source, such as a pipe or ditch. Examples of sources in this category include discharges from a sewage treatment plant, a factory, or a city storm drain.

The U.S. Clean Water Act (CWA) defines point source for regulatory enforcement purposes (see United States regulation of point source water pollution).[40] The CWA definition of point source was amended in 1987 to include municipal storm sewer systems, as well as industrial storm water, such as from construction sites.[41]

Sewage

Sewage typically consists of 99.9% water and 0.1% solids.[42] Sewage contributes many classes of nutrients that lead to eutrophication. It is a major source of phosphate for example.[43] Sewage is often contaminated with diverse compounds found in personal hygiene, cosmetics, pharmaceutical drugs (see also drug pollution), and their metabolites[44][45] Water pollution due to environmental persistent pharmaceutical pollutants can have wide-ranging consequences. When sewers overflow during storm events this can lead to water pollution from untreated sewage. Such events are called sanitary sewer overflows or combined sewer overflows.

Industrial wastewater

Perfluorooctanesulfonic acid (PFOS) is a global pollutant that has been found in drinking water. It appears not to biodegrade.[46]

Industrial processes that use water also produce wastewater. Using the US as an example, the main industrial consumers of water (using over 60% of the total consumption) are power plants, petroleum refineries, iron and steel mills, pulp and paper mills, and food processing industries.[47] Some industries discharge chemical wastes, including solvents and heavy metals (which are toxic) and other harmful pollutants such as nutrients. Certain industries (e.g. food processing) discharge high concentrations of biochemical oxygen demand (BOD) and oil and grease.[48]: 180 [10] Some industrial discharges include persistent organic pollutants such as per- and polyfluoroalkyl substances (PFAS).[12][13]

Oil spills

An oil spill is the release of a liquid petroleum hydrocarbon into the environment, especially the marine ecosystem, due to human activity, and is a form of pollution. The term is usually given to marine oil spills, where oil is released into the ocean or coastal waters, but spills may also occur on land. Oil spills may be due to releases of crude oil from tankers, offshore platforms, drilling rigs and wells, as well as spills of refined petroleum products (such as gasoline and diesel fuel) and their by-products, heavier fuels used by large ships such as bunker fuel, or the spill of any oily refuse or waste oil.[citation needed]

Pollution from nonpoint sources

Nonpoint source (NPS) pollution refers to diffuse contamination (or pollution) of water or air that does not originate from a single discrete source. This type of pollution is often the cumulative effect of small amounts of contaminants gathered from a large area. It is in contrast to point source pollution which results from a single source. Nonpoint source pollution generally results from land runoff, precipitation, atmospheric deposition, drainage, seepage, or hydrological modification (rainfall and snowmelt) where tracing pollution back to a single source is difficult.[49] Nonpoint source water pollution affects a water body from sources such as polluted runoff from agricultural areas draining into a river, or wind-borne debris blowing out to sea. Nonpoint source air pollution affects air quality, from sources such as smokestacks or car tailpipes. Although these pollutants have originated from a point source, the long-range transport ability and multiple sources of the pollutant make it a nonpoint source of pollution; if the discharges were to occur to a body of water or into the atmosphere at a single location, the pollution would be single-point.

Agriculture

Agriculture is a major contributor to water pollution from nonpoint sources. The use of fertilizers as well as surface runoff from farm fields, pastures and feedlots leads to nutrient pollution.[50] In addition to plant-focused agriculture, fish-farming is also a source of pollution. Additionally, agricultural runoff often contains high levels of pesticides.[47]

Measurement

Environmental scientists preparing water autosamplers.

Water pollution may be analyzed through several broad categories of methods: physical, chemical and biological. Some methods may be conducted in situ, without sampling, such as temperature. Others involve collection of samples, followed by specialized analytical tests in the laboratory. Standardized, validated analytical test methods, for water and wastewater samples have been published.[51]

Common physical tests of water include temperature, Specific conductance or electrical conductance (EC) or conductivity, solids concentrations (e.g., total suspended solids (TSS)) and turbidity. Water samples may be examined using analytical chemistry methods. Many published test methods are available for both organic and inorganic compounds. Frequently used parameters that are quantified are pH, biochemical oxygen demand (BOD),[52]: 102  chemical oxygen demand (COD),[52]: 104  dissolved oxygen (DO), total hardness, nutrients (nitrogen and phosphorus compounds, e.g. nitrate and orthophosphates), metals (including copper, zinc, cadmium, lead and mercury), oil and grease, total petroleum hydrocarbons (TPH), surfactants and pesticides.

Sampling

The complexity of water quality as a subject is reflected in the many types of measurements of water quality indicators. Some measurements of water quality are most accurately made on-site, because water exists in equilibrium with its surroundings. Measurements commonly made on-site and in direct contact with the water source in question include temperature, pH, dissolved oxygen, conductivity, oxygen reduction potential (ORP), turbidity, and Secchi disk depth.

Biological testing

The use of a biomonitor is described as biological monitoring. This refers to the measurement of specific properties of an organism to obtain information on the surrounding physical and chemical environment.[53] Biological testing involves the use of plant, animal or microbial indicators to monitor the health of an aquatic ecosystem. They are any biological species or group of species whose function, population, or status can reveal what degree of ecosystem or environmental integrity is present.[54] One example of a group of bio-indicators are the copepods and other small water crustaceans that are present in many water bodies. Such organisms can be monitored for changes (biochemical, physiological, or behavioral) that may indicate a problem within their ecosystem.

Impacts

Ecosystems

Water pollution is a major global environmental problem because it can result in the degradation of aquatic ecosystems.[citation needed] The specific contaminants leading to pollution in water include a wide spectrum of chemicals, pathogens, and physical changes such as elevated temperature. While many of the chemicals and substances that are regulated may be naturally occurring (calcium, sodium, iron, manganese, etc.) the concentration usually determines what is a natural component of water and what is a contaminant. High concentrations of naturally occurring substances can have negative impacts on aquatic flora and fauna. Oxygen-depleting substances may be natural materials such as plant matter (e.g. leaves and grass) as well as man-made chemicals. Other natural and anthropogenic substances may cause turbidity (cloudiness) which blocks light and disrupts plant growth, and clogs the gills of some fish species.[citation needed]

There is concern that water pollution can damage phytoplankton in the oceans who produce 70% of oxygen and remove a large part of carbon dioxide from the atmosphere.[55][self-published source?]

Public health and waterborne diseases

A study published in 2017 stated that "polluted water spread gastrointestinal diseases and parasitic infections and killed 1.8 million people" (these are also referred to as waterborne diseases).[56]

Eutrophication from nitrogen pollution

Oxygen depletion, resulting from nitrogen pollution and eutrophication is a common cause of fish kills.

Nitrogen pollution (a form of water pollution where excessive amounts of nutrients are added to a water body), can cause eutrophication, especially in lakes. Eutrophication is an increase in the concentration of chemical nutrients in an ecosystem to an extent that increases the primary productivity of the ecosystem. Depending on the degree of eutrophication, subsequent negative environmental effects such as anoxia (oxygen depletion) and severe reductions in water quality may occur, affecting fish and other animal populations.[1]: 131 


Eutrophication is a general term describing a process in which nutrients accumulate in a body of water, resulting in an increased growth of microorganisms that may deplete the water of oxygen.[57][58] Although eutrophication is a natural process, manmade or cultural eutrophication is far more common and is a rapid process caused by a variety of polluting inputs including poorly treated sewage, industrial wastewater, and fertilizer runoff.[59] Such nutrient pollution usually causes algal blooms and bacterial growth, resulting in the depletion of dissolved oxygen in water and causing substantial environmental degradation.[60]

Ocean acidification

Ocean acidification is another impact of water pollution. Ocean acidification is the ongoing decrease in the pH value of the Earth's oceans, caused by the uptake of carbon dioxide (CO2) from the atmosphere.[61]

Prevalence

Share of water bodies with good water quality in 2020 (a water body is classified as "good" quality if at least 80% of monitoring values meet target quality levels, see also SDG 6, Indicator 6.3.2)

Water pollution is a problem in developing countries as well as in developed countries.

By country

For example, water pollution in India and China is wide spread. About 90 percent of the water in the cities of China is polluted.[62]

Control and reduction

View of secondary treatment reactors (activated sludge process) at the Blue Plains Advanced Wastewater Treatment Plant, Washington, D.C., United States. Seen in the distance are the sludge digester building and thermal hydrolysis reactors.

Pollution control philosophy

One aspect of environmental protection are mandatory regulations but they are only part of the solution. Other important tools in pollution control include environmental education, economic instruments, market forces and stricter enforcements.[63] Standards can be "precise" (for a defined quantifiable minimum or maximum value for a pollutant), or "imprecise" which would require the use of Best Available Technology (BAT) or Best Practicable Environmental Option (BPEO).[63] Market-based economic instruments for pollution control can include: charges, subsidies, deposit or refund schemes, the creation of a market in pollution credits, and enforcement incentives.[63]

Moving towards a holistic approach in chemical pollution control combines the following approaches: Integrated control measures, trans-boundary considerations, complementary and supplementary control measures, life-cycle considerations, the impacts of chemical mixtures.[63]

Control of water pollution requires appropriate infrastructure and management plans. The infrastructure may include wastewater treatment plants, for example sewage treatment plants and industrial wastewater treatment plants. Agricultural wastewater treatment for farms, and erosion control at construction sites can also help prevent water pollution. Effective control of urban runoff includes reducing speed and quantity of flow.

Water pollution requires ongoing evaluation and revision of water resource policy at all levels (international down to individual aquifers and wells).

Sanitation and sewage treatment

Fecal sludge collected from pit latrines is dumped into a river at the Korogocho slum in Nairobi, Kenya.

Municipal wastewater (or sewage) can be treated by centralized sewage treatment plants, decentralized wastewater systems, nature-based solutions[64] or in onsite sewage facilities and septic tanks. For example, waste stabilization ponds are a low cost treatment option for sewage, particularly for regions with warm climates.[1]: 182  UV light (sunlight) can be used to degrade some pollutants in waste stabilization ponds (sewage lagoons).[65] The use of safely managed sanitation services would prevent water pollution caused by lack of access to sanitation.[4]

Well-designed and operated systems (i.e., with secondary treatment stages or more advanced tertiary treatment) can remove 90 percent or more of the pollutant load in sewage.[66] Some plants have additional systems to remove nutrients and pathogens. While such advanced treatment techniques will undoubtedly reduce the discharges of micropollutants, they can also result in large financial costs, as well as environmentally undesirable increases in energy consumption and greenhouse gas emissions.[67]

Sewer overflows during storm events can be addressed by timely maintenance and upgrades of the sewerage system. In the US, cities with large combined systems have not pursued system-wide separation projects due to the high cost,[68] but have implemented partial separation projects and green infrastructure approaches.[69] In some cases municipalities have installed additional CSO storage facilities[70] or expanded sewage treatment capacity.[71]

Industrial wastewater treatment

Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater (or effluent) may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate wastewater that can be treated in sewage treatment plants. Most industrial processes, such as petroleum refineries, chemical and petrochemical plants have their own specialized facilities to treat their wastewaters so that the pollutant concentrations in the treated wastewater comply with the regulations regarding disposal of wastewaters into sewers or into rivers, lakes or oceans.[72]: 1412  This applies to industries that generate wastewater with high concentrations of organic matter (e.g. oil and grease), toxic pollutants (e.g. heavy metals, volatile organic compounds) or nutrients such as ammonia.[73]: 180  Some industries install a pre-treatment system to remove some pollutants (e.g., toxic compounds), and then discharge the partially treated wastewater to the municipal sewer system.[74]: 60 

Agricultural wastewater treatment

Agricultural wastewater treatment is a farm management agenda for controlling pollution from confined animal operations and from surface runoff that may be contaminated by chemicals in fertilizer, pesticides, animal slurry, crop residues or irrigation water. Agricultural wastewater treatment is required for continuous confined animal operations like milk and egg production. It may be performed in plants using mechanized treatment units similar to those used for industrial wastewater. Where land is available for ponds, settling basins and facultative lagoons may have lower operational costs for seasonal use conditions from breeding or harvest cycles.[75]: 6–8  Animal slurries are usually treated by containment in anaerobic lagoons before disposal by spray or trickle application to grassland. Constructed wetlands are sometimes used to facilitate treatment of animal wastes.

Management of erosion and sediment control

Silt fence installed on a construction site.

Sediment from construction sites can be managed by installation of erosion controls, such as mulching and hydroseeding, and sediment controls, such as sediment basins and silt fences.[76] Discharge of toxic chemicals such as motor fuels and concrete washout can be prevented by use of spill prevention and control plans, and specially designed containers (e.g. for concrete washout) and structures such as overflow controls and diversion berms.[77]

Erosion caused by deforestation and changes in hydrology (soil loss due to water runoff) also results in loss of sediment and, potentially, water pollution.[78][79]

Control of urban runoff (storm water)

Effective control of urban runoff involves reducing the velocity and flow of stormwater, as well as reducing pollutant discharges. Local governments use a variety of stormwater management techniques to reduce the effects of urban runoff. These techniques, called best management practices for water pollution (BMPs) in some countries, may focus on water quantity control, while others focus on improving water quality, and some perform both functions.[80]

Legislation

Some examples for legislation to control water pollution are listed below:

See also

References

  1. ^ a b c d e f g h Von Sperling, M. (2015). "Wastewater Characteristics, Treatment and Disposal". IWA Publishing. 6. doi:10.2166/9781780402086. ISBN 9781780402086.
  2. ^ W. Wesley Eckenfelder Jr. (2000). Kirk‐Othmer Encyclopedia of Chemical Technology (1 ed.). John Wiley & Sons, Inc. doi:10.1002/0471238961.1615121205031105.a01. ISBN 978-0-471-48494-3.
  3. ^ "Water Pollution". Environmental Health Education Program. Cambridge, MA: Harvard T.H. Chan School of Public Health. July 23, 2013. Retrieved September 18, 2021.
  4. ^ a b c WHO and UNICEF (2017) Progress on Drinking Water, Sanitation and Hygiene: 2017 Update and SDG Baselines. Geneva: World Health Organization (WHO) and the United Nations Children's Fund (UNICEF), 2017
  5. ^ Moss, Brian (2008). "Water Pollution by Agriculture". Phil. Trans. R. Soc. Lond. B. 363 (1491): 659–666. doi:10.1098/rstb.2007.2176. PMC 2610176. PMID 17666391.
  6. ^ Guidelines for the Safe Use of Wastewater, Excreta and Greywater, Volume 4 Excreta and Greywater Use in Agriculture (third ed.). Geneva: World Health Organization. 2006. ISBN 9241546859.
  7. ^ Pollution: Causes, effects, and control. Roy M. Harrison (5th ed.). Cambridge, UK: Royal Society of Chemistry. 2013. ISBN 978-1-78262-560-5. OCLC 1007100256.{{cite book}}: CS1 maint: others (link)
  8. ^ Schueler, Thomas R. "Microbes and Urban Watersheds: Concentrations, Sources, & Pathways." Reprinted in The Practice of Watershed Protection. Archived January 8, 2013, at the Wayback Machine 2000. Center for Watershed Protection. Ellicott City, MD.
  9. ^ Report to Congress: Impacts and Control of CSOs and SSOs (Report). EPA. August 2004. EPA 833-R-04-001.
  10. ^ a b c Laws, Edward A. (2018). Aquatic Pollution: An Introductory Text (4th ed.). Hoboken, NJ: John Wiley & Sons. ISBN 9781119304500.
  11. ^ a b Stormwater Effects Handbook: A Toolbox for Watershed Managers, Scientists, and Engineers. New York: CRC/Lewis Publishers. 2001. ISBN 0-87371-924-7. {{cite book}}: Cite uses deprecated parameter |authors= (help) Chapter 2.
  12. ^ a b Johnson, Mark S.; Buck, Robert C.; Cousins, Ian T.; Weis, Christopher P.; Fenton, Suzanne E. (2021). "Estimating Environmental Hazard and Risks from Exposure to Per‐ and Polyfluoroalkyl Substances (PFASs): Outcome of a SETAC Focused Topic Meeting". Environmental Toxicology and Chemistry. 40 (3): 543–549. doi:10.1002/etc.4784. ISSN 0730-7268. PMC 8387100. PMID 32452041.
  13. ^ a b Sinclair, Georgia M.; Long, Sara M.; Jone s, Oliver A.H. (2020). "What are the effects of PFAS exposure at environmentally relevant concentrations?". Chemosphere. 258: 127340. Bibcode:2020Chmsp.258l7340S. doi:10.1016/j.chemosphere.2020.127340. PMID 32563917. S2CID 219974801.
  14. ^ Knight, Kathryn (2021). "Freshwater methamphetamine pollution turns brown trout into addicts". Journal of Experimental Biology. 224 (13): jeb242971. doi:10.1242/jeb.242971. ISSN 0022-0949.
  15. ^ De Lorenzo, Daniela (June 18, 2021). "MDMA Gangs Are Literally Polluting Europe". Vice World News. Brooklyn, NY: Vice Media Group.
  16. ^ Alexandrou, Lydon; Meehan, Barry J.; Jones, Oliver A.H. (2018). "Regulated and emerging disinfection by-products in recycled waters". Science of the Total Environment. 637–638: 1607–1616. Bibcode:2018ScTEn.637.1607A. doi:10.1016/j.scitotenv.2018.04.391. PMID 29925195.
  17. ^ "Environment Agency (archive) – Persistent, bioaccumulative and toxic PBT substances". Environment Agency (UK). Archived from the original on August 4, 2006. Retrieved November 14, 2012.
  18. ^ Natural Environmental Research Council – River sewage pollution found to be disrupting fish hormones. Planetearth.nerc.ac.uk. Retrieved on 2012-12-19.
  19. ^ "Endocrine Disruption Found in Fish Exposed to Municipal Wastewater". Reston, VA: US Geological Survey. Archived from the original on October 15, 2011. Retrieved November 14, 2012.
  20. ^ Ritter L; Solomon KR; Forget J; Stemeroff M; O'Leary C. "Persistent organic pollutants" (PDF). United Nations Environment Programme. Archived from the original (PDF) on September 26, 2007. Retrieved September 16, 2007.
  21. ^ Wang J, Wang S (November 2016). "Removal of pharmaceuticals and personal care products (PPCPs) from wastewater: A review". Journal of Environmental Management. 182: 620–640. doi:10.1016/j.jenvman.2016.07.049. PMID 27552641.
  22. ^ Schueler, Thomas R. "Cars Are Leading Source of Metal Loads in California." Reprinted in The Practice of Watershed Protection. Archived March 12, 2012, at the Wayback Machine 2000. Center for Watershed Protection. Ellicott City, MD.
  23. ^ "Development solutions: Building a better ocean". European Investment Bank. Retrieved August 19, 2020.
  24. ^ Resnick, Brian (September 19, 2018). "More than ever, our clothes are made of plastic. Just washing them can pollute the oceans". Vox. Retrieved October 4, 2021.
  25. ^ Arvaniti and Stasinakis, 2015. Review on the occurrence, fate and removal of perfluorinated compounds during wastewater treatment. Science of the Total Environment vol. 524-525, August 2015, p. 81-92. Arvaniti and Stasinakis, 2015
  26. ^ Bletsou et al., 2013. Mass loading and fate of linear and cyclic siloxanes in a wastewater treatment plant in Greece. Environmental Science and Technology vol. 47, January 2015, p. 1824-1832. Bletsou et al., 2013
  27. ^ Gatidou et al., 2016. Drugs of abuse and alcohol consumption among different groups of population on the Greek island of Lesvos through sewage-based epidemiology. Science of the Total Environment vol. 563-564, September 2016, p. 633-640. Gatidou et al., 2016
  28. ^ Gatidou et al. 2019. Review on the occurrence and fate of microplastics in Sewage Treatment Plants. Journal of Hazardous Materials, vol. 367, April 2019, p. 504-512. Gatidou et al., 2019
  29. ^ Sheppard, Charles, ed. (2019). World seas: an Environmental Evaluation. Vol. III, Ecological Issues and Environmental Impacts (Second ed.). London: Academic Press. ISBN 978-0-12-805204-4. OCLC 1052566532.
  30. ^ "Marine Pollution". Education | National Geographic Society. Retrieved June 19, 2023.
  31. ^ Duce, Robert; Galloway, J.; Liss, P. (2009). "The Impacts of Atmospheric Deposition to the Ocean on Marine Ecosystems and Climate WMO Bulletin Vol 58 (1)". Archived from the original on December 18, 2023. Retrieved September 22, 2020.
  32. ^ "What is the biggest source of pollution in the ocean?". National Ocean Service (US). Silver Spring, MD: National Oceanic and Atmospheric Administration. Retrieved September 21, 2022.
  33. ^ Walters, Arlene, ed. (2016). Nutrient Pollution From Agricultural Production: Overview, Management and a Study of Chesapeake Bay. Hauppauge, NY: Nova Science Publishers. ISBN 978-1-63485-188-6.
  34. ^ "Reactive Nitrogen in the United States: An Analysis of Inputs, Flows, Consequences, and Management Options, A Report of the Science Advisory Board" (PDF). Washington, DC: US Environmental Protection Agency (EPA). EPA-SAB-11-013. Archived from the original (PDF) on February 19, 2013.
  35. ^ "Brayton Point Station Power Plant, Somerset, MA: Final NPDES Permit". Boston, MA: United States Environmental Protection Agency (EPA). May 21, 2021.
  36. ^ "Protecting Water Quality from Urban Runoff". Washington, D.C.: EPA. February 2003. Fact Sheet. EPA 841-F-03-003.
  37. ^ Goel, P. K. (2006). Water pollution : causes, effects and control (Rev. 2nd ed.). New Delhi: New Age International. ISBN 81-224-1839-2. OCLC 85857626.
  38. ^ Olenin, Sergej; Minchin, Dan; Daunys, Darius (2007). "Assessment of biopollution in aquatic ecosystems". Marine Pollution Bulletin. 55 (7–9): 379–394. doi:10.1016/j.marpolbul.2007.01.010. PMID 17335857.
  39. ^ Adelana, Segun Michael (2014). Groundwater: Hydrogeochemistry, Environmental Impacts and Management Practices. Nova Science Publishers, Inc. ISBN 978-1-63321-791-1. OCLC 915416488.
  40. ^ United States. Clean Water Act (CWA), section 502(14), 33 U.S.C. § 1362 (14).
  41. ^ U.S. CWA section 402(p), 33 U.S.C. § 1342(p)
  42. ^ Scholz, Miklas (2016). "Sewage Treatment". Wetlands for Water Pollution Control. pp. 13–15. doi:10.1016/B978-0-444-63607-2.00003-4. ISBN 9780444636072.
  43. ^ Nesaratnam, Suresh T, ed. (2014). Water Pollution Control. doi:10.1002/9781118863831. ISBN 9781118863831.
  44. ^ Knight, Kathryn (2021). "Freshwater methamphetamine pollution turns brown trout into addicts". Journal of Experimental Biology. 224 (13): jeb242971. doi:10.1242/jeb.242971. ISSN 0022-0949.
  45. ^ De Lorenzo, Daniela (June 18, 2021). "MDMA Gangs Are Literally Polluting Europe". Vice World News. Brooklyn, NY: Vice Media Group.
  46. ^ Governments unite to step-up reduction on global DDT reliance and add nine new chemicals under international treaty. Geneva: Stockholm Convention Secretariat. May 8, 2009.
  47. ^ a b Eckenfelder, W. Wesley (2000). "Water, Pollution". Kirk‐Othmer Encyclopedia of Chemical Technology. doi:10.1002/0471238961.1615121205031105.a01. ISBN 9780471484943.
  48. ^ "Chapter 3: Analysis and Selection of Wastewater Flowrates and Constituent Loadings". Wastewater engineering: treatment and reuse. George Tchobanoglous, Franklin L. Burton, H. David Stensel, Metcalf & Eddy (4th ed.). Boston: McGraw-Hill. 2003. ISBN 0-07-041878-0. OCLC 48053912.{{cite book}}: CS1 maint: others (link)
  49. ^ "Basic Information about Nonpoint Source Pollution". Washington, DC: US Environmental Protection Agency (EPA). October 7, 2020.
  50. ^ Arlene., Walters (2016). Nutrient Pollution From Agricultural Production. Nova Science Publishers, Inc. ISBN 978-1-63485-188-6. OCLC 960163923.
  51. ^ For example, see Baird, Rodger B.; Clesceri, Leonore S.; Eaton, Andrew D.; et al., eds. (2012). Standard Methods for the Examination of Water and Wastewater (22nd ed.). Washington, DC: American Public Health Association. ISBN 978-0875530130.
  52. ^ a b Newton, David (2008). Chemistry of the Environment. Checkmark Books. ISBN 978-0-8160-7747-2.
  53. ^ U.S. Environmental Protection Agency. Office of Water and Office of Research and Development. (March 2016). "National Rivers and Streams Assessment 2008-2009: A Collaborative Study" (PDF). Washington D.C.
  54. ^ Karr, James R. (1981). "Assessment of biotic integrity using fish communities". Fisheries. 6 (6): 21–27. doi:10.1577/1548-8446(1981)006<0021:AOBIUF>2.0.CO;2. ISSN 1548-8446.
  55. ^ "How Man is Destroying His Own Life Support System - The Oceans". stopkillingwhales.com. Retrieved August 5, 2021.
  56. ^ Kelland, Kate (October 19, 2017). "Study links pollution to millions of deaths worldwide". Reuters.
  57. ^ "Nutrients and Eutrophication | U.S. Geological Survey". www.usgs.gov. Retrieved February 9, 2024.
  58. ^ Aczel, Miriam R. (2019). "What Is the Nitrogen Cycle and Why Is It Key to Life?". Frontiers for Young Minds. 7. doi:10.3389/frym.2019.00041. hdl:10044/1/71039.
  59. ^ "Cultural eutrophication | ecology | Britannica". www.britannica.com. Retrieved February 9, 2024.
  60. ^ Carpenter, S. R. (2008). "Phosphorus control is critical to mitigating eutrophication". Proceedings of the National Academy of Sciences. 105 (32): 11039–11040. Bibcode:2008PNAS..10511039C. doi:10.1073/pnas.0806112105. PMC 2516213. PMID 18685114.
  61. ^ Caldeira, K.; Wickett, M. E. (2003). "Anthropogenic carbon and ocean pH". Nature. 425 (6956): 365. Bibcode:2001AGUFMOS11C0385C. doi:10.1038/425365a. PMID 14508477. S2CID 4417880.
  62. ^ "China says water pollution so severe that cities could lack safe supplies". Chinadaily.com.cn. June 7, 2005.
  63. ^ a b c d Jones, Oliver A. H.; Gomes, Rachel L. (2013). "Chapter 1: Chemical Pollution of the Aquatic Environment by Priority Pollutants and its Control". Pollution: Causes, Effects and Control (5th ed.). Royal Society of Chemistry. ISBN 978-1-84973-648-0.
  64. ^ UN-Water (2018) World Water Development Report 2018: Nature-based Solutions for Water, Geneva, Switzerland
  65. ^ Wang, Yufei; Fan, Linhua; Jones, Oliver A.H.; Roddick, Felicity (2021). "Quantification of seasonal photo-induced formation of reactive intermediates in a municipal sewage lagoon upon sunlight exposure". Science of the Total Environment. 765: 142733. Bibcode:2021ScTEn.765n2733W. doi:10.1016/j.scitotenv.2020.142733. PMID 33572041. S2CID 225156609.
  66. ^ Primer for Municipal Wastewater Treatment Systems (Report). EPA. 2004. p. 11. EPA 832-R-04-001.
  67. ^ Jones, Oliver A. H.; Green, Pat G .; Voulvoulis, Nikolaos; Lester, John N. (2007). "Questioning the Excessive Use of Advanced Treatment to Remove Organic Micropollutants from Wastewater". Environmental Science & Technology. 41 (14): 5085–5089. Bibcode:2007EnST...41.5085J. doi:10.1021/es0628248. PMID 17711227.
  68. ^ Renn, Aaron M. (February 25, 2016). "Wasted: How to Fix America's Sewers" (PDF). New York, NY: Manhattan Institute. p. 7.
  69. ^ Greening CSO Plans: Planning and Modeling Green Infrastructure for Combined Sewer Overflow Control (PDF) (Report). EPA. March 2014. 832-R-14-001.
  70. ^ "Clean Rivers Project". District of Columbia Water and Sewer Authority. Retrieved September 21, 2021.
  71. ^ "United States and Ohio Reach Clean Water Act Settlement with City of Toledo, Ohio". EPA. August 28, 2002. Press release. Archived from the original on January 13, 2016.
  72. ^ Tchobanoglous G, Burton FL, Stensel HD (2003). Metcalf & Eddy Wastewater Engineering: treatment and reuse (4th ed.). McGraw-Hill Book Company. ISBN 0-07-041878-0.
  73. ^ George Tchobanoglous; Franklin L. Burton; H. David Stensel (2003). "Chapter 3: Analysis and Selection of Wastewater Flowrates and Constituent Loadings". Metcalf & Eddy Wastewater engineering: treatment and reuse (4th ed.). Boston: McGraw-Hill. ISBN 0-07-041878-0. OCLC 48053912.
  74. ^ Von Sperling, M. (2007). "Wastewater Characteristics, Treatment and Disposal". Water Intelligence Online. 6. doi:10.2166/9781780402086. ISSN 1476-1777. Text was copied from this source, which is available under a Creative Commons Attribution 4.0 International License
  75. ^ Reed, Sherwood C. (1988). Natural systems for waste management and treatment. E. Joe Middlebrooks, Ronald W. Crites. New York: McGraw-Hill. ISBN 0-07-051521-2. OCLC 16087827.
  76. ^ Tennessee Department of Environment and Conservation. Nashville, TN (2012). "Tennessee Erosion and Sediment Control Handbook."
  77. ^ Concrete Washout (Report). Stormwater Best Management Practice. EPA. February 2012. BMP fact sheet. EPA 833-F-11-006.
  78. ^ Mapulanga, Annie Mwayi; Naito, Hisahiro (2019). "Effect of deforestation on access to clean drinking water". Proceedings of the National Academy of Sciences. 116 (17): 8249–8254. Bibcode:2019PNAS..116.8249M. doi:10.1073/pnas.1814970116. ISSN 0027-8424. PMC 6486726. PMID 30910966.
  79. ^ "Climate change and land use are accelerating soil erosion by water". www.preventionweb.net. Retrieved August 4, 2021.
  80. ^ "Ch. 5: Description and Performance of Storm Water Best Management Practices". Preliminary Data Summary of Urban Storm Water Best Management Practices (Report). Washington, DC: United States Environmental Protection Agency (EPA). August 1999. EPA-821-R-99-012.
  81. ^ a b "An Act Providing For A Comprehensive Water Quality Management And For Other Purposes". The LawPhil Project. Archived from the original on 21 September 2016. Retrieved 30 September 2016.
  82. ^ United States. Clean Water Act. 33 U.S.C. § 1251 et seq. Pub. L.Tooltip Public Law (United States) 92–500. Approved October 18, 1972.
  83. ^ "Water Quality: A Half Century of Progress" (PDF). EPA Alumni Association. March 2016. {{cite web}}: Cite uses deprecated parameter |authors= (help)

External links