Captive fastener
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7e/Unverlierbare_Schraube-360.jpg/220px-Unverlierbare_Schraube-360.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/0b/Unverlierbare_Schraube-372.jpg/220px-Unverlierbare_Schraube-372.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/ae/Gesicherte_Schraube_an_Kameragurt-381.jpg/220px-Gesicherte_Schraube_an_Kameragurt-381.jpg)
A captive fasteners is an engineered fastener designed for a permanent hold within a target assembly or housing, including upon servicing. They provide a secure joining, and avoid fastener loss or damage that might be caused by a loose part.
A captive fastener is sometimes made with thread locking, press-fitting, or broaching to accomplish an anchor-hold within a larger assembly housing. However, a captive fastener may also be melded with the material into which it is joined, either through cold forming or welding.[1][2]
Captive screws are a type of machine screw which are frequently used for safety reasons, often with a captive washer. They are now required by EU law on equipment such as safety guards so that machinery complies with EU Machine Safety Directive 2006/42/EC.
References[edit]
- ^ Machinery's Handbook. industrialpress.com.
- ^ "Industrial Fasteners Institute (IFI)". indfast.org.