Fused quartz: Difference between revisions
mNo edit summary |
No edit summary |
||
Line 58: | Line 58: | ||
*[[glass]] |
*[[glass]] |
||
*[[list of minerals]] |
*[[list of minerals]] |
||
==Weblinks== |
|||
*[http://www.aerosil.com More information about AEROSIL<sup>®</sup> Fumed Silica] |
|||
[[Category:Chemical engineering]] |
[[Category:Chemical engineering]] |
Revision as of 13:54, 27 April 2006
Fused quartz or fused silica are types of glass that are amorphous (non-crystalline), and are manufactured using a number of processes.
Fused Quartz is made by melting high purity naturally occuring quartz crystal at around 2000°C. using either an electrically heated furnace (Electrically Fused) or a gas/oxygen fuelled furnace (Flame Fused). Fused quartz is normally transparent.
Fused Silica is produced using high purity silica sand as the feedstock, and is normally melted using an electric furnace, resulting in a material that is translucent or opaque. (This opacity is caused by very small air bubbles trapped within the material.)
Synthetic Fused Silica is made from a silica-rich, chemical precursor, resulting in a transparent glass with an ultra-high purity and improved optical transmission in the deep ultraviolet.
The optical and thermal properties are superior to those of other types of glass due to its purity (or rather, its lack of impurities). For these reasons, it finds use in situations such as semiconductor fabrication and laboratory equipment. It has better ultraviolet transmission than most other glasses, and so is used to make lenses and other optics for the ultraviolet spectrum. Its low coefficient of thermal expansion also makes it a useful material for precision mirror substrates.
Chemistry
Fused quartz is a noncrystalline form of silicon dioxide (SiO2), which is also called silica. (The crystalline form of this material is quartz).
Applications
Specially prepared fused silica is also the key starting material used to make optical fiber for telecommunications.
Because of its strength and high melting point (compared to ordinary glass), fused silica is used as the envelope of halogen lamps, which must operate at a high envelope temperature to achieve their combination of high brightness and long life.
The combination of strength, thermal stability, and UV transparency makes it an excellent substrate for projection masks for photolithography.
Fused quartz has nearly ideal properties for fabricating first surface mirrors such as those used in telescopes. The material behaves in a predictable way and allows the optical fabricator to put a very smooth polish onto the surface and produce the desired figure with fewer testing iterations.
Translucent fused silica is used to make crucibles, trays and other containers for use in high temperature thermal processing, which are chemically inert to to most elements and compounds including virtually all acids, regardless of concentration. Translucent tubes are commonly used to sheath electric elements in room heaters, industrial furnaces and other similar applications.
Physical Properties
The extremely low coefficient of thermal expansion accounts for its remarkable ability to undergo large, rapid temperature changes without cracking.
"UV grade" synthetic fused silica has a very low metallic impurity content making it transparent deeper into the ultraviolet. An optic with a thickness of 1cm will have a transmittance of about 50% at a wavelength of 170 nm, which drops to only a few percent at 160 nm. However, its infrared transmission is limited by strong water absorptions at 2.2 μm and 2.7 μm.
"IR grade" fused quartz (which is electrically fused) has a greater presence of metallic impurities, limiting its UV transmittance wavelength to around 250 nm, but a much lower water content, leading to excellent infrared transmission up to 3.6 μm wavelength. All grades of transparent fused quartz/fused silica have near-identical physical properties.
(The water content (and therefore infrared transmission of fused quartz and fused silica) is determined by the manufacturing process. Flame fused material always has a higher water content due to the combination of the hydrocarbons and oxygen fuelling the furnace forming hydroxyl [OH] within the material. An IR grade material typically has an [OH] content of <10 parts per million.)
Typical Properties of clear fused quartz
- Density: 2.203 g/cm3
- Hardness: 7 (Modified Scale); 5.3–6.5 (Mohs Scale)
- Tensile strength: 48.3 MPa
- Compressive strength: >1.1 GPa
- Bulk modulus: ~37 GPa
- Rigidity modulus: 31 GPa
- Young's modulus: 71.7 GPa
- Poisson's ratio: 0.16
- Coefficient of thermal expansion: 5.5×10-7 cm/(cm·K) (average from 20 °C to 320 °C)
- Thermal conductivity: 1.3 W/(m·K)
- Heat capacity: 45.3 J/mol
- Softening point: c. 1665 °C
- Annealing point: c. 1140 °C
- Strain point: 1070 °C
- Electrical resistivity: >1018 Ω×m
- Dielectric constant: 3.75 at 20 °C 1 MHz
- Dielectric loss factor: less than 0.0004 at 20 °C 1 MHz
- Index of refraction at 587.6 nm (nd): 1.4585