Fuel polishing: Difference between revisions
m Bot: galleries syntax |
rem improper bold |
||
Line 4: | Line 4: | ||
{{Refimprove|date=May 2015}}}} |
{{Refimprove|date=May 2015}}}} |
||
'''Fuel polishing''' is the technical cleaning process used to remove or filter microbial contamination from oil and hydrocarbon fuel in storage.<ref>{{cite web|author= |url=http://www.crownoilenvironmental.co.uk/fuel-polishing/ |title=Fuel Polishing: Contamination Removal & Filtration | C.O.E |publisher=Crownoilenvironmental.co.uk |date= |accessdate=2015-05-22}}</ref> It is essentially the removal of water, sediment and microbial contamination from such fuels as [[Diesel fuel|diesel]], [[red diesel]] and [[biodiesel]]. This fuel contamination, also known as 'fuel bugs' or |
'''Fuel polishing''' is the technical cleaning process used to remove or filter microbial contamination from oil and hydrocarbon fuel in storage.<ref>{{cite web|author= |url=http://www.crownoilenvironmental.co.uk/fuel-polishing/ |title=Fuel Polishing: Contamination Removal & Filtration | C.O.E |publisher=Crownoilenvironmental.co.uk |date= |accessdate=2015-05-22}}</ref> It is essentially the removal of water, sediment and microbial contamination from such fuels as [[Diesel fuel|diesel]], [[red diesel]] and [[biodiesel]]. This fuel contamination, also known as 'fuel bugs' or ''diesel bugs'' build up over time in stored fuels if they aren't tested and treated on a regular basis. |
||
==Sources of contamination== |
==Sources of contamination== |
Revision as of 07:31, 30 October 2017
![]() | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
Fuel polishing is the technical cleaning process used to remove or filter microbial contamination from oil and hydrocarbon fuel in storage.[1] It is essentially the removal of water, sediment and microbial contamination from such fuels as diesel, red diesel and biodiesel. This fuel contamination, also known as 'fuel bugs' or diesel bugs build up over time in stored fuels if they aren't tested and treated on a regular basis.
Sources of contamination
Over any given period of time fuels in storage can develop pools of sludge, sediment and water caused by microbial contamination. This contamination can quite easily find its way into fuel at one of the many exchange points in its journey from source to end user. Left untreated, the levels of contamination worsen to the point where damage to machinery, pumps and engines is likely. When fuel is pumped into a tank condensation, atmospheric absorption, and a faulty tank are usually the main causes of fuel contamination. Microbes find their way into fuel and cause problems as they multiply and grow.
In April 2010, Cathay Pacific Flight 780, an aircraft carrying over 300 passengers, had a close call when fuel contaminated with spherical particles damaged the aircraft's engines, resulting in 57 passenger injuries as the pilots had to land the aircraft at twice the normal landing speed.[2]
Symptoms of 'diesel bugs'
The symptoms of diesel bugs are easy to find. Important things to check over and look out for are:
- Worn Fuel Injectors
- Blocked Filters
- Corroded Tanks
- Engine Failure
Microbial contamination is heavily accelerated when higher FAME content occurs along with lower sulphur content.
Water In oil
Almost everything on Earth contains elements of water and with oil and fuel there is no exception. Albeit very small amounts exist in fuels to start with, but stored fuel will become a breeding ground for the microbial bacteria and over time, the levels of damage change from dissolved to emulsified and finally free.
- Dissolved - Dissolved water in oil is the presence of water but, unnoticeable to the eye. The water continues to develop until saturation point where water visibility begins.
- Emulsified - At the point of saturation, a cloudy appearance will be the tell-tale sign that the water/oil mixture has become emulsified.
- Free - The most developed stage of fuel contamination is when free flowing puddles of water appear within stored oil. At this point, bacterial contamination and growth is boosted.
Levels of fuel contamination
At different levels of contamination, fuel and oil can be treated by varying methods. These methods differ in cost, timescales and experience of carrying out the treatment.
- Negligible - A negligible state is completely acceptable and the microbial content within the fuel is perfectly normal. It is worth keeping a note of when someone checked the fuel and its state. Then one may check again in a few months.
- Moderate - With a moderate level of microbes within the fuel, damage can occur and treatment of the fuel is required. Treatment for moderate fuel contamination can be a simple biocide which will help decontaminate the fuel.
- Heavy - Heavier levels of contamination require a full analysis of the fuel and storage tank. Removing a large volume of microbes from fuel requires pumping out the contaminated fuel and polishing it. The tank will then need manual cleaning whilst checking for corrosion. Once the tank is free of debris, corrosion and contamination the decontaminated fuel is pumped back into the clean tank. For fuel that is beyond polishing treatment, a fresh batch of fuel will have to replace the old fuel.
The contaminants found in fuel can be made up of a number of things, predominantly Hormoconis Resinae, which is typically the main contaminant when microbial contamination is present, along with bacteria Pseudomonas Aeruginosa, and fungi such as yeasts and moulds like Yarrowia tropicalis.[3]
Equipment used in fuel polishing
Fuel polishing requires minimal equipment to carry out a thorough job. However, larger volumes of fuels in storage can require large backup tankers and tanks to hold the contaminated fuel whilst the oil tank is cleaned. Below is an equipment list for a typical fuel cleaning process.
- Protective Wear
- Additives
- Polishing Unit
- Tanker or Tank
Fuel polishing process
In essence "polishing" is an advanced level filtration of the fuel, monitored and controlled via a central processing unit. Its application ensures the need for fuel additives is either massively reduced or totally removed. A typical process involves a single pass of the fuel through different apparatus, removing increasingly finer contaminant in each stage. The application of different filter technologies is vital; a single process is not sufficient to extract the different forms of water and matter found in fuel.
-
Typical advanced fuel polishing system (W-PFS)
During the fuel polishing process, multiple stages are required to effectively remove the solid particulates, wet foreign matter and water from the fuel. This multi-stage process ensures the high efficiency of the process, however ensuring dense matter removal first is key, as is the removal of large matter on the suction side of the internal pumping stage. High pressurisation of fuel contamination is notoriously dangerous and as such the majority of the polishing process should be carried out on the suction side. The pressure side process is often referred to as the final or finishing stage, where 2 micron particulate[4] is removed and the fuel's final water content is extracted to within the efficiency of the filter stages.
The amount of time required to complete the fuel polishing process depends on several factors. One of the most important is the specific fuel polishing machine used. Fuel cleaning machines can polish at rates from 8 litres per minute to upwards of 400 litres per minute, however the factors which govern the process are about more than just flow rate. In fact a high flow rate can be detrimental to the overall effect due to increased pressures in the filter stages and adverse disturbance in the fuel tank. Another factor can be the quality of the fuel. If the fuel is highly contaminated it will typically take longer to clean than a batch of cleaner fuel of the same volume. The third factor to take into account is the volume of fuel to be processed. It may seem obvious but the larger the volume of fuel that requires polishing, the longer it will take to complete the cleaning process.
References
- ^ "Fuel Polishing: Contamination Removal & Filtration | C.O.E". Crownoilenvironmental.co.uk. Retrieved 2015-05-22.
- ^ Cathay Pacific Flight 780
- ^ "Correct Biocide Dosing is Critical for Effective Protection of Fuels" (PDF). Msdresearch.dow.com. Retrieved 2015-05-22.
- ^ "W-PFS Range Systems". www.wasp-pfs.com. Retrieved 2016-02-04.