Jump to content

Fusion ignition

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Gagarine (talk | contribs) at 23:51, 12 August 2022 (→‎Current research). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Fusion ignition is the point at which a nuclear fusion reaction becomes self-sustaining. This occurs when the energy being given off by the fusion reactions heats the fuel mass more rapidly than various loss mechanisms cool it. At this point, the external energy needed to heat the fuel to fusion temperatures is no longer needed.[1] As the rate of fusion varies with temperature, the point of ignition for any given machine is typically expressed as a temperature.

Ignition results indicated

On November 8th 2021 in an invited talk to the 63rd Annual Meeting of the APS Division of Plasma Physics,[2] the National Ignition Facility claimed [3] to have triggered ignition in the laboratory on Sunday, August 8th 2021 for the first time in the 60+ year history of the ICF program.[4][5] The shot yield 1.3 Megajoules of fusion energy, an over 8X improvements on tests done in spring of 2021.[3] NIF estimates that 230 kilo-joules of energy reached the fuel capsule, which resulted in an almost 6-fold energy output from the capsule.[3] A researcher from Imperial College London stated that the majority of the field agreed that ignition had been demonstrated.[3] Researchers at NIF have since been trying to replicate the August result, so far without success.[6]

Current research

Ignition should not be confused with breakeven, a similar concept that compares the total energy being given off to the energy being used to heat the fuel. The key difference is that breakeven ignores losses to the surroundings, which do not contribute to heating the fuel, and thus are not able to make the reaction self-sustaining. Breakeven is an important goal in the fusion energy field, but ignition is required for a practical energy producing design.[7]

In nature, stars reach ignition at temperatures similar to that of the Sun, around 15 million Kelvin (27 million degrees F). Stars are so large that the fusion products will almost always interact with the plasma before their energy can be lost to the environment at the outside of the star. In comparison, man-made reactors are far less dense and much smaller, allowing the fusion products to easily escape the fuel. To offset this, much higher rates of fusion are required, and thus much higher temperatures; most man-made fusion reactors are designed to work at temperatures around 100 million degrees, or higher.

As of 2020, no man-made reactor has reached breakeven. Ignition has been achieved in the cores of detonating thermonuclear weapons, which require a conventional fission(U-235 or Pu-239/241) tamper to set the process alight.

Lawrence Livermore National Laboratory has its 1.8 MJ laser system running at full power. This laser system is designed to compress and heat a mixture of deuterium and tritium, which are both isotopes of hydrogen, in order to compress the isotopes to a fraction of their original size, and fuse them into helium atoms (releasing neutrons in the process).[8]

In January 2012, National Ignition Facility Director Mike Dunne predicted in a Photonics West 2012 plenary talk that ignition would be achieved at NIF by October 2012.[9] However, as of 2015, NIF is operating at conditions about 1/10 to 1/3 of breakeven. Confusingly, by LLNL definitions, ignition and breakeven occur at the same point, due to specifics of their experiment.

The world's first fusion reactor predicted to be capable of 'breakeven' is currently underway. Based on the Tokamak reactor design, the ITER is intended to achieve fusion for a prolonged period of time before structural integrity is affected. Construction is expected to be completed in 2025.

Experts believe that achieving fusion ignition is the first step towards the potentially limitless energy source that is nuclear fusion.[10]

See also

References

  1. ^ Chandler, David L. "New project aims for fusion ignition". MIT News. MIT. Retrieved 24 February 2012.
  2. ^ "Session AR01: Review: Creating A Burning Plasma on the National Ignition Facility".
  3. ^ a b c d "Ignition First in a Fusion Reaction".
  4. ^ "Major nuclear fusion milestone reached as 'ignition' triggered in a lab".
  5. ^ "National Ignition Facility experiment puts researchers at threshold of fusion ignition".
  6. ^ "Lawrence Livermore's latest attempts at ignition fall short".
  7. ^ "The National Ignition Facility: Ushering in a New Age for Science". Lawrence Livermore National Laboratory. Archived from the original on 2 May 2012. Retrieved 26 February 2012.
  8. ^ National Research Council (U.S.). Plasma Committee (20 December 2007). Plasma science: advancing knowledge in the national interest. The National Academic Press. p. 24. ISBN 978-0-309-16436-8.
  9. ^ Hatcher, Mike (26 January 2012). "PW 2012: fusion laser on track for 2012 burn". Optics.org. San Francisco. Retrieved 11 January 2019.
  10. ^ National Research Council (U.S.). Plasma Committee (20 December 2007). Plasma science: advancing knowledge in the national interest. The National Academic Press. ISBN 978-0-309-16436-8.


Stub icon

This nuclear physics or atomic physics–related article is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Fusion_ignition&oldid=1104141094"