Henry Bessemer
 | This article includes a list of general references, but it lacks sufficient corresponding inline citations. (November 2008) |
Henry Bessemer | |
|---|---|
 | |
| Born | January 19, 1813 |
| Died | March 15, 1898 (aged 85) |
| Occupation(s) | engineer and inventor |
| Known for | Development of the Bessemer process for the manufacture of steel. |
Sir Henry Bessemer (January 19, 1813–March 15, 1898), was an English engineer and inventor. Bessemer's name is chiefly known in connection with the Bessemer process for the manufacture of steel.
Early life
Henry Bessemer's father, Anthony, was born in London, but moved to Paris when he was 21 years old. He was an inventor who while he was engaged by the Paris Mint, made a machine for making medallions that could produce steel dies from a larger model. He became a member of the French Academy of Science, for his improvements to the optical microscope, when he was only 26. He was forced to leave Paris by the French Revolution of 1848, and returned to Britain. There he invented a process for making gold chains, which was successful, and enabled him to buy a small estate in the village of Charlton, near Hitchin in Hertfordshire.
Early inventions
The invention from which he made his first fortune was a series of six steam-powered machines for making very fine brass powder which was used as a gold paint. As he relates in his autobiography, he examined the gold paint made in Nuremberg and was the only source at the time. He then copied and improved the product and made it capable of being made on a simple production line. It was an early example of reverse engineering where a product is analysed, and then reconstituted. Each employee knew only his part of the process, so secrecy was assured. It was a closely guarded secret, with only a few trusted employees and members of his immediate family involved. It was a widely used alternative to a patent, and such trade secrets are still used today. The profits from sale of the paint allowed him to pursue his other inventions.
Bessemer patented a method for making a continuous ribbon of plate glass in 1848, but it was not commercially successful (see his autobiography, chapter 8). However, he gained experience in design of furnaces, which was to be of great use for his new steel-making process.
Bessemer process
Bessemer worked on the problem of manufacturing cheap steel for the purposes of ordinance production from 1850 to 1855 when he patented his method[2]. On August 24, 1856 Bessemer first described the process to a meeting of the British Association in Cheltenham which he titled "The Manufacture of Iron Without Fuel." It was published in full in The Times. The Bessemer process involved using oxygen in air blown through molten pig iron to burn off the impurities and thus create steel[3].
Many industries were constrained by the lack of steel, being reliant on cast iron and wrought iron alone. Examples include railway structures such as bridges and tracks, where the treacherous nature of cast iron was keenly felt by many engineers and designers. There had been many accidents when cast iron beams collapsed suddenly, such as the Dee bridge disaster of May 1847.
Though this process is no longer commercially used, at the time of its invention it was of enormous industrial importance because it lowered the cost of production steel, leading to steel being widely substituted for cast iron. Bessemer's attention was drawn to the problem of steel manufacture in the course of an attempt to improve the construction of guns.
Implementation
Though five firms applied without delay for licences to work under his patents, success did not at once attend his efforts; indeed, after several ironmasters had put the process to practical trial and failed to get good results, it was in danger of being thrust aside and entirely forgotten. Its author, however, instead of being discouraged by this lack of success, continued his experiments, and in two years was able to turn out a product, the quality of which was not inferior to that yielded by the older methods. But when he now tried to induce makers to take up his improved system, he met with general rebuffs, and finally was driven to undertake the exploitation of the process himself.
To exploit the process, he erected steelworks in Sheffield, on ground purchased with the help of friends, and began to manufacture steel. At first the output was insignificant, but gradually the magnitude of the operations was enlarged until the competition became effective, and steel traders generally became aware that the firm of Henry Bessemer & Co. was underselling them to the extent of $20 a ton. This argument to the pocket quickly had its effect, and licences were applied for in such numbers that, in royalties for the use of his process, Bessemer received a sum in all considerably exceeding a million pound sterling.
Patent battles
Of course, patents of such obvious value did not escape criticism, and invalidity was freely urged against them on various grounds. But Bessemer was fortunate enough to maintain them intact without litigation, though he found it advisable to buy up the rights of one patentee, while in another case he was freed from anxiety by the patent being allowed to lapse in 1859 through non-payment of fees. At the outset he had found great difficulty in making steel by his process; in his first licenses to the trade iron alone was mentioned.
Experiments he made with South Wales iron were failures because the product was devoid of malleability; Mr Göransson, a Swedish ironmaster, using the purer charcoal pig iron of that country, was the first to make good steel by the process, and even he was successful only after many attempts. His results prompted Bessemer to try the purer iron, obtained from Cumberland hematite, but even with this he did not meet with much success, until Robert Forester Mushet showed that the addition of a certain quantity of spiegeleisen had the effect of removing the difficulties.
Whether or not Mushet's patents could have been sustained, the value of his procedure was shown by its general adoption in conjunction with the Bessemer method of conversion. At the same time it is only fair to say that whatever may have been the conveniences of Mushet's plan, it was not absolutely essential; this Bessemer proved in 1865, by exhibiting a series of samples of steel made by his own process alone.
In 1866, Bessemer provided finance for Zerah Colburn, the American locomotive engineer and journalist, to start a new weekly engineering newspaper called Engineering, and based in Bedford Street, London. It was not until many years later that the name of Colburn's benefactor was revealed. Prior to the launch of Engineering, Colburn, through the pages of The Engineer, had given support to Bessemer's work on steel and steelmaking.
Other inventions
Among Bessemer's numerous other inventions were movable dies for embossed stamps, and a screw extruder for more efficiently extracting sugar from sugar cane.
An unlikely and ultimately unsuccessful venture was the SS Bessemer (also called the "Bessemer Saloon"), a passenger steamship with a cabin on gimbals designed to stay level, however rough the sea, to save her passengers from the miseries of seasickness. The mechanism - hydraulics controlled by a steersman watching a spirit level - worked in model form but never received a seagoing test, and when the ship demolished part of the Calais pier on her maiden voyage, investor confidence was lost and the ship scrapped.[4].
Bessemer also obtained a patent in 1857 for the casting of metal between contrarotating rollers - a forerunner of today's continuous casting processes and remarkably, Bessemer's original idea has been implemented in the direct continuous casting of steel strip.
He was a prolific inventor, and held at least 129 patents which spanned the interval of time from 1838 to 1883. They concerned four main areas: manufacture of iron and steel; of glass; of sugar; and of cannon and other ordnance.
His autobiography describes all of his inventions, some in great detail as one might expect from such an innovative man. It is also a very readable book which relates many amusing incidents in his long and fruitful career.
Family life
He was married to in 1834 when he was 21 years old. He had (at least) two sons. One of them, also called Henry, added a last chapter to his father's autobiography. His family has continued to live in England but has mostly spread to Australia.and Gabriel rodriquez was his best friend along side with andres lara and heavy d and jared phillips ....hi
Honours and legacy
Henry Bessemer was Knighted on June 26, 1879, and in the same year was made a fellow of the Royal Society. Sheffield's Kelham Island Industrial Heritage Museum, maintains an early example of a Bessemer Converter for public viewing. He has also had a Street named after him in the town Hitchin (Bessemer Close) bordering the village of Ickleford in 1995.
See also
- Bessemer process
- Bessemer, Alabama
- Dee bridge disaster
- steel
- SS Bessemer Victory
- William Kelly
- Krupp, steelmakers
External links
- ^ Sir Henry Bessemer Inventor & Engineer
- ^ Boylston, H. M. 1936. An Introduction to the Metallurgy of Iron and Steel. New York: John Wiley & Son Inc.p218
- ^ Boylston, H. M. 1936. An Introduction to the Metallurgy of Iron and Steel. New York: John Wiley & Son Inc.p218-219
- ^ The Bessemer Saloon Steam-Ship, Chapter XX, Sir Henry Bessemer, F.R.S. An Autobiography, online at University of Rochester
- Websites
- General citations
- This article incorporates text from a publication now in the public domain: Chisholm, Hugh, ed. (1911). Encyclopædia Britannica (11th ed.). Cambridge University Press.
{{cite encyclopedia}}: Missing or empty|title=(help) - Robert Mushet
