Jump to content

Ducati 851

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 86.93.208.34 (talk) at 22:13, 14 June 2020 (Previous undo listed "No evidence of notability". Evidence of notability has now been added.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Ducati 851
ManufacturerDucati
Production1987-1992
SuccessorDucati 888
ClassSport bike
Engine851 cc (52 cu in), 90° V-twin, fuel injected
Power93.00 hp (67.9 kW)) @ 9,600 rpm
Transmission6 speed, chain drive
Frame typeTubular steel trellis frame
BrakesFront: Dual disc
Rear: Single disc
TiresFront: 120/70-17
Rear: 180/55-17
Weight~430 lb (200 kg) (dry)
~460 lb (210 kg) (wet)
Fuel capacity20 litres (5.3 US gal)

The Ducati 851 is a 90° V-twin fully faired sport bike with liquid cooling and four valve heads. It was produced by Ducati between 1987 and 1992, when it was succeeded by the Ducati 888.

Development

The Ducati 851 was the successor to the air-cooled two-valve Ducati 750 F1. Development had lagged with the continued use of two-valve engines, but new investment funded the technological advance that Ducati desperately needed.[1][2] After buying Ducati, Cagiva invested in the development of another V-twin, but with liquid cooling, and four-valve desmodromic heads. Massimo Bordi had designed a 4V Desmo in 1973 for his thesis at the University of Bologna, and with Cagiva in 1985, saw his updated ideas come into production as the Desmoquattro. Based on the Pantah motor, but with liquid cooling, fuel injection, and desmodromic four valve heads (with an included valve angle of 40°), the 851 made Ducati once again competitive in motorcycle racing.

The original Desmo Quattro was an experimental 748 cc four-valve racer (seen at the Bol d'Or in 1986) and used 750 F1 Pantah crankcases. Bordi collaborated with Cosworth to develop the heads, but in the time they had, they were only able to reduce the included valve angle of the desmodromic engine to 40°, while less than 30° was possible with valve springs. Ducati stuck with the desmodromics.[3] The subsequent 851 road bike had stronger crankcases, while the heads and valves remained the same; designed to fit above the 88 mm bore of a 748 cc version.

The 1987 – 1988 Ducati 851 Tricolor used the signature steel tube trellis frame, adorned with Marvic wheels, Brembo brakes and Marzocchi suspension. That first release was criticised for its handling, with the 16inch wheels so the wheels were enlarged from a 16-inch to 17-inch wheels. In addition, upgraded Ohlins USD suspension components were fitted front, along with fully floating front Brembo brake rotors.

In 1991 the bore was enlarged when Ducati released the SP Series of limited edition race replicas needed to sell the required number of bikes for the street in order to be homologated for racing, thus creating the Ducati 888.[4] In 1992 three Ducati superbike models were available: the 851 Strada (851 cc), the 888 SP4 (888 cc) and the 888 SP4S (888 cc).

A notable owner of this motorcycle was triple Formula One world champion Ayrton Senna. [5] [6] [7]

Racing

References

  1. ^ "Ducati 851". Diseno. Retrieved 2006-11-05.
  2. ^ "Ducati Heritage: The 851". Ducati Motor Holding. Retrieved 2008-06-22.
  3. ^ "The story of the 748 Quattrovalvole". SigmaPerformance. Retrieved 2006-11-05.
  4. ^ "'888 SBK specs". Ducati. Retrieved 2006-11-06.
  5. ^ https://i.pinimg.com/564x/a2/b5/62/a2b56240a1f321c64b675b1b938abbc6.jpg
  6. ^ https://en.wikipedia.org/wiki/Ayrton_Senna
  7. ^ https://www.britannica.com/biography/Ayrton-Senna
  8. ^ "Ducati Heritage: The 851". Ducati Motor Holding. Retrieved 2008-06-22.
  9. ^ "Ducati Heritage: The 851". Ducati Motor Holding. Retrieved 2008-06-22.
  10. ^ "Ducati Heritage: The 851". Retrieved 2008-06-22.