Telephone numbers in China

From Wikipedia, the free encyclopedia
  (Redirected from +86)
Jump to navigation Jump to search

China telephone numbers
CHN orthographic.svg
Access codes
Country calling code+86
International call prefix00
Trunk prefix0
Map of the area codes

Telephone numbers in China are organized according to the Chinese Telephone Code Plan. The numerical formats of landlines and mobile phones are different: landlines have area codes, whereas mobile phones do not. In major cities, landline numbers consist of a two-digit area code followed by an eight-digit inner number. In other places, landline numbers consist of a three-digit area code followed by a seven- or eight-digit internal number. The numbers of mobile phones consist of eleven digits.

When one landline is used to dial another landline within the same area, it is not necessary to specify the area code. The target number must be prepended between different regions with the trunk prefix, which is 0.

Calling a mobile phone from a landline requires the addition of the "0" in front of the mobile phone number if they are not in the same area. Mobile to landline calls requires the "0" and the area code if the landline is not within the same place. Mobile to mobile calls does not require the "0om outside mainland China.

The Special Administrative Regions of Hong Kong and Macau are not part of this numbering plan and use the country codes +852 and +853, respectively.

Mobile phones[edit]

In mainland China, mobile phone numbers have 11 digits in the format 1xx-XXXX-XXXX (except for 140–144, which are 13-digit IoT numbers), in which the first three digits (13x to 19x) designate the mobile phone service provider.

Before GSM, mobile phones had 6-digit (later upgraded to 7-digit) numbers starting with nine. They had the same numbering format as fixed-line telephones. Those numbers were eventually translated into 1390xx9xxx, where xx were local identifiers.

The oldest China Mobile GSM numbers were ten digits long and started with 139 in 1994, the second oldest 138 in 1997, and 137, 136, 135 in 1999. The oldest China Unicom numbers started with 130 in 1995, the second oldest at 131 in 1998. Keeping the same number over time is somewhat associated with the stability and reliability of the owner. The 5th to the seventh digit sometimes relates to age and location.

China's mobile phone numbers upgraded from 10-digit to 11-digit, with 0 added after 13x, and thus HLR code became 4-digit long to expand the capacity of the seriously fully crowded numbering plan.

In 2006, 15x numbers were introduced.In late 2008, 18x and 14x (for data plans or IoT) were introduced. In late 2013, 17x were introduced. In 2017, 16x and 19x were introduced.

In December 2016, each cell phone number was required to be consigned to a real name in mainland China.

Mobile service providers can be identified by the first three or four digits as follows:

Prefix Provider Network
130–132 China Unicom LTE/WCDMA/GSM
133 China Telecom1 LTE/CDMA2000/cdmaOne
134(0–8) China Mobile LTE/TD-SCDMA/GSM
1349 Chinasat Satellite
135–139 China Mobile LTE/TD-SCDMA/GSM
140 (13 digits) China Unicom (IoT) LTE/WCDMA/GSM
141 (13 digits) China Telecom (IoT) LTE/CDMA2000/cdmaOne
144 (13 digits) China Mobile (IoT) LTE/TD-SCDMA/GSM
145 China Unicom (formerly Data-plans only) LTE/WCDMA
146 China Unicom (IoT) LTE/WCDMA/GSM
147 China Mobile (formerly Data-plans only) LTE/TD-SCDMA
148 China Mobile (IoT) LTE/TD-SCDMA/GSM
149 China Telecom (formerly Data-plans only) LTE/CDMA2000/cdmaOne
150/1/2/7/8/9 China Mobile LTE/TD-SCDMA/GSM
153 China Telecom1 LTE/CDMA2000/cdmaOne
155/6 China Unicom LTE/WCDMA/GSM
162 China Telecom (VNO) LTE/CDMA2000/cdmaOne
165 China Mobile (VNO) LTE/TD-SCDMA/GSM
166 China Unicom LTE/WCDMA/GSM
167 China Unicom (VNO) LTE/WCDMA/GSM
170(0/1/2) China Telecom (VNO) LTE/CDMA2000/cdmaOne
170(3/5/6) China Mobile (VNO) LTE/TD-SCDMA/GSM
170(4/7/8/9) China Unicom (VNO) LTE/WCDMA/GSM
171 China Unicom (VNO) LTE/WCDMA/GSM
172/8 China Mobile LTE/TD-SCDMA/GSM
173/7 China Telecom LTE/CDMA2000/cdmaOne
174(00-05) Chinasat Satellite
1749 Inmarsat2 Satellite
175/6 China Unicom LTE/WCDMA/GSM
180/1/9 China Telecom LTE/CDMA2000/cdmaOne
182/3/4/7/8 China Mobile LTE/TD-SCDMA/GSM
185/6 China Unicom LTE/WCDMA/GSM
190/1/3/9 China Telecom LTE/CDMA2000/cdmaOne
192 China Broadcasting Network LTE/WCDMA/GSM
195/7/8 China Mobile LTE/TD-SCDMA/GSM
196 China Unicom LTE/WCDMA/GSM

1 – China Unicom before 2009

2 – Operated by China Transport Telecommunication & Information Center

Calling formats[edit]

To call phone numbers in China people one of the following formats is used:

  • For fixed phones:

xxx xxxx | xxxx xxxx Calls within the same area code

0yyy xxx xxxx | 0yyy xxxx xxxx Calls from other areas within China

+86 yyy xxx xxxx | +86 yyy xxxx xxxx Calls from outside China

  • For mobile phones:

1nn xxxx xxxx Calls to mobile phones within China

+86 1nn xxxx xxxx Calls to mobiles from outside China

Area 1 – Capital Operation Center[edit]

The prefix one is used exclusively by the national capital, Beijing Municipality.

  • Beijing – 10 (formerly 1, abolished after GSM was introduced, to avoid conflict with mobile phone numbers with prefix 0 added (e.g. 0139-xxxx-xxxx))

Area 2 – Country Communication System Operating Center[edit]

These are area codes for the municipalities of Shanghai, Tianjin, and Chongqing, as well as several major cities with early access to telephones. These cities have upgraded to an 8-number system in the past decade[when?]. All telephone numbers are 8-digit in these areas.

3 - Formerly 811, 814, 819, 810, 829, abolished 1997.
4 - Formerly 410, 413, abolished 2011,[1] and 414, abolished in 2014.
5 - Formerly 832, 833, abolished 2010.[2]
6 - Formerly 910, abolished 2006.[3]

Area 3 – Northern China Operation Center[edit]

These are area codes for the provinces of Hebei, Shanxi and Henan.

Hebei – 31x 33x[edit]

Shanxi (山西) – 34x 35x[edit]

Henan – 37x 39x[edit]

8 - Formerly 378, abolished.
9 - Formerly 397, abolished.

Area 4 – Northeastern China Operation Center[edit]

These are area codes for the autonomous region of Inner Mongolia, and the provinces in Northeast China (Liaoning, Jilin, and Heilongjiang). Additionally, numbers starting 400 are shared-pay (callers are charged local rate anywhere in the country) numbers[citation needed].

Liaoning – 41x 42x[edit]

Jilin – 43x 44x[edit]

10 - Hunchun formerly 440, abolished
11 - Meihekou, Liuhe, Huinan formerly 448, abolished

Heilongjiang – 45x 46x[edit]

12 -Acheng formerly 450, abolished.
13 - Jiagedaqi and Songling are de facto under the administration of the Daxing'anling
, uses 457.

Inner Mongolia – 47x 48x[edit]

14 - Jiagedaqi and Songling are de facto under the administration of the Daxing'anling
, uses 457.

Area 5 – Eastern China Operating Center[edit]

These are area codes for the provinces of Jiangsu, Shandong (predominantly), Anhui, Zhejiang and Fujian.

Jiangsu – 51x 52x[edit]

All telephone numbers are 8-digit in Jiangsu.

Shandong – 53x 54x[edit]

Anhui – 55x 56x[edit]

15 - Split from Fuyang in 2000, no new area code allocated.

Zhejiang – 57x 58x[edit]

Fujian – 59x 50x[edit]

16 - Kinmen, Matsu, and Wuchiu are under the international calling code of +886.

Area 6 – Supplement for Shandong(63x), Guangdong(66x), Yunnan(69x)[edit]

All area codes with prefix 6 were assigned in recent years. This prefix (+866) previously was reserved for Taiwan, which is now assigned (+886).[4]

Shandong – 63x[edit]

While most areas in Shandong use the prefix 53x 54x, some sites also use the prefix 6.

Guangdong – 66x[edit]

While most areas in Guangdong use the prefix 75x and 76x, some sites also use the prefix 6. The provincial capital Guangzhou uses code 20.

Yunnan – 69x[edit]

While most areas in Yunnan use the prefix 87x and 88x, a couple of areas also use the prefix 6.

Area 7 – Central-Southern China Operating Center[edit]

These are area codes for the central provinces of Hubei, Hunan, Guangdong (predominantly), Jiangxi, and the autonomous region of Guangxi.

Hubei – 71x 72x[edit]

Hunan – 73x 74x[edit]

17 - Formerly 733, abolished.
18 - Formerly 732, abolished.

Guangdong – 75x 76x[edit]

Guangxi – 77x 78x[edit]

19 - Split from Wuzhou Prefecture, original area code inherited.
20 - Split from Liuzhou Prefecture, original area code inherited.
21 - Split from Yulin Prefecture, original area code inherited.
22 - Split from Nanning Prefecture, original area code inherited.

Jiangxi – 79x 70x[edit]

Area 8 -Southwestern China Operating Center[edit]

These are area codes for the provinces of Sichuan, Hainan, Guizhou, Yunnan (predominantly) and the autonomous region of Tibet.

Sichuan – 81x 82x 83x[edit]

Guizhou – 85x 86x[edit]

23 - Formerly 852, 853, abolished 2014.[6]

Yunnan – 87x 88x[edit]

24 - Dongchuan formerly 881, incorporated into 871

Tibet/Xizang – 89(1–7)[edit]

Hainan – 898[edit]

All telephone numbers are 8-digit in Hainan.

Area 9 – Northwestern China Operating Center[edit]

These are area codes for northwestern regions including the provinces of Shaanxi, Gansu and Qinghai, as well as the autonomous regions of Ningxia and Xinjiang.

Shaanxi (陕西) – 91x 92x[edit]

Gansu – 93x 94x[edit]

25 - Shared area code due to small size.

Ningxia – 95x 96x[edit]

Qinghai – 97x 98x[edit]

26 - Area under the administration of Golmud uses 979, other landlines within the prefecture use 977.

Xinjiang – 99x 90x[edit]

Emergency numbers[edit]

From within Mainland China, the following emergency numbers are used:

In most cities, the emergency numbers assist in Mandarin Chinese and English.

Starting from 2012 in Shenzhen, an implemented system upgrade to unify three emergency reporting services into one number, 110. A similar approach is being installed in more cities in China to make them more convenient.

Dialing 112, 911, and 999 (outside Beijing without area code 010) plays a recording message about the correct emergency numbers in Chinese and English twice: "For police, dial 110. To report a fire, dial 119. For ambulance, dial 120. To report a traffic accident, dial 122." on China Mobile and China Unicom phones, NO SERVICES will be redirected. The error messages "Number does not exist" will be played on China Telecom phones, and NO SERVICES will be redirected.


From within Mainland China, the following special numbers are used:

(ex. 962288 in Shanghai – Shanghai foreigner assistant hotline, calls outside Shanghai is people will play 021-962288, or a message will reach error message or undesired service)

International Access Code[edit]

The international access code from the PRC is 00. This must also be used for calls to Taiwan, Hong Kong and Macau from the Chinese mainland, together with their separate international codes, as follows:

place! Prefix
(All countries) 00 CountryCode AreaCode SubscriberCode
Taiwan 00 886 xxx xxx xxx[7]
Hong Kong 00 852 xxxx xxxx[8]
Macau 00 853 xxxx xxxx[9]
NANP 00 1 xxx xxx xxxx
UK 00 44 xxxxxxxxxx
Japan 00 81 xxxxxxxxx

See also[edit]


  1. ^ "沈阳、抚顺、铁岭正式开始共用"024"长途区号-搜狐新闻".
  2. ^ "成都眉山资阳三地将共用长途区号028_新闻中心_新浪网".
  3. ^ "西安咸阳今夜电话同区号-搜狐新闻".
  4. ^ The story of Taiwan's calling code, Taipei Times, October 5, 2010
  5. ^ Nanhai No.1 & Guangdong Maritime Silk Road Museum Archived 2016-10-11 at the Wayback Machine
  6. ^ "贵阳遵义安顺实现通信同城化 共享区号0851".
  7. ^ China Vista, Eugene Law, China Intercontinental Press, 2004, page 519
  8. ^ China International Business: The Monthly Publication of the Ministry of Foreign Trade and Economic Cooperation, P.R.C, Issues 7–12, Ministry of Foreign Trade and Economic Cooperation, 2002
  9. ^ China Law, Issues 1–6, 2008, page 50

External links[edit]