0-4-0+4

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Andy Dingley (talk | contribs) at 23:05, 23 November 2017 (Reverted 1 edit by Dougr1 (talk) to last revision by Andy Dingley. (TW)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

0-4-0+4
Diagram of two large driving wheels joined by a coupling rod, and two small trailing wheels
Front of locomotive at left
Cape Government Railways Railmotor drawing, 1906
Equivalent classifications
UIC classB2
First known tank engine version
First usec. 1848
CountryUnited Kingdom
DesignerWilliam Bridges Adams
BuilderWilliam Bridges Adams

Under the Whyte notation for the classification of steam locomotives, 0-4-0+4 represents the wheel arrangement of no leading wheels, four powered and coupled driving wheels on two axles and four trailing wheels on two axles mounted in a bogie.

Overview

The 0-4-0+4 wheel arrangement was usually found on Railmotors, vehicles for passenger carrying that operated on routes where passenger numbers were light. It usually consisted of a single coach with its own prime mover. William Bridges Adams in the United Kingdom began building railmotors in small numbers as early as 1848.

Usage

Cape of Good Hope

A single Railmotor was delivered to the Cape Government Railways (CGR) in 1906. The railmotor was a self-contained motor-coach in which the locomotive and coach were embodied in a single vehicle, with a driver's station at the rear end of the coach for reverse running. The locomotive part was a 0-4-0 side-tank engine which was built by North British Locomotive Company, while the coach part on a single bogie was built by Metropolitan Amalgamated Railway Carriage & Wagon.[1]

Transvaal Colony

In 1907, the Central South African Railways (CSAR) acquired a single self-contained railmotor for the low-volume railmotor passenger service which had been introduced the previous year. It was a self-contained motor-coach with a 56-seat capacity in which the engine, boiler and coach were embodied in a single vehicle. While the engine part of the vehicle was built by Kitson and Company, the 46 feet 11 inches (14,300 millimetres) long coach part was constructed by Metropolitan Amalgamated Railway Carriage & Wagon. To negotiate curves and points, the power unit could pivot like a bogie. The railmotor was erected at the Salt River shops of the Cape Government Railways (CGR) in Cape Town and entered service on the CSAR on 10 August 1907.[2][3][4]

References

  1. ^ Metropolitan Amalgamated Railway Carriage and Wagon Company Ltd drawing no. 12640
  2. ^ Espitalier, T.J.; Day, W.A.J. (1945). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VI - Imperial Military Railways and C.S.A.R. (Continued). South African Railways and Harbours Magazine, March 1945. pp. 184-185.
  3. ^ CSAR General Manager's Reports, Extracts from the CSAR General Manager's Reports for 1906, 1907, 1908 & 1909.
  4. ^ Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. p. 24. ISBN 0869772112.