Jump to content

Direct Fusion Drive

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Burhann17 (talk | contribs) at 07:59, 3 January 2024 (Changed the internal link for the word [Thrust] in 2nd line from link to 'Nuclear thermal rocket' to the actual meaning/definition of 'Thrust' to avoid confusion for any other reader.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

One rotating magnetic field pulse of the Princeton field-reversed configuration (PFRC 2) device during testing

Direct Fusion Drive (DFD) is a conceptual, low radioactivity, nuclear-fusion rocket engine, designed to produce both thrust and electric power for interplanetary spacecraft. The concept is based on the Princeton field-reversed configuration reactor, invented in 2002 by Samuel A. Cohen, and is being modeled and experimentally tested at Princeton Plasma Physics Laboratory, a U.S. Department of Energy facility. It is also modeled and evaluated by Princeton Satellite Systems.[1][2] As of 2018, the concept entered Phase II, a simulation phase.[3]

Principle

The Direct Fusion Drive (DFD) is a conceptual, fusion-powered spacecraft engine named for its ability to produce thrust from nuclear fusion without going through an intermediary electricity-generating step. The DFD uses a magnetic confinement and heating system, fueled with a mixture of helium-3 (3He) and deuterium (D or 2H), to produce a high specific power, variable thrust and specific impulse, and a low-radiation spacecraft propulsion system.[4]

In the DFD, plasma, a collection of electrically charged particles that includes electrons and ions, fuse together at high temperatures (100 keV), releasing enormous amounts of energy. The plasma is confined in a torus-like magnetic field inside of a linear solenoidal coil[5] and is heated by a rotating magnetic field to relevant fusion temperatures.[4] Bremsstrahlung and synchrotron radiation emitted from the plasma are captured and converted to electricity for communications, spacecraft station-keeping, and maintaining the plasma's temperature.[6] This design uses a specially shaped radio frequency (RF) "antenna" to heat the plasma.[7] The design includes a rechargeable battery or a deuterium-oxygen auxiliary power unit to startup or restart the unit.[4]

The captured radiated energy heats a He-Xe fluid that flows outside the plasma to 1,500 K (1,230 °C; 2,240 °F) in a boron-containing structure. That energy is put through a closed-loop Brayton cycle generator to transform it into electricity for use in energizing the coils, powering the RF heater, charging the battery, communications, and station-keeping functions.[4]

Thrust generation

Adding propellant to the edge plasma flow results in a variable thrust and specific impulse when channeled and accelerated through a magnetic nozzle; this flow of momentum past the nozzle is predominantly carried by the ions as they expand through the magnetic nozzle and beyond, and thus, function as an ion thruster.[4]

Development

The construction of the experimental research device and most of its early operations were funded by the U.S. Department of Energy. The recent studies—Phase I and Phase II—were funded by the NASA Institute for Advanced Concepts (NIAC) program.[7] A series of articles on the concept were published between 2001 and 2008; the first experimental results were reported in 2007. Numerous studies of spacecraft missions (Phase I) were published, beginning in 2012. In 2017 Princeton Satellite Systems reported that "Studies of electron heating with this method have surpassed theoretical predictions, and experiments to measure ion heating in the second-generation machine are ongoing."[4]

As of 2018, the concept has moved to Phase II, a simulation phase.[8][9] The full-size unit would measure approximately 2 m in diameter and 10 m in length.[10] PSS reported that electron heating in PFRC-2 surpassed theoretical predictions, reaching 500 eV with pulse lengths of 300 ms. Ion heating experiments are ongoing as of 2020.[11]

Stephanie Thomas is vice president of Princeton Satellite Systems and the principal investigator for the Direct Fusion Drive.[12]

Projected performance

Princeton Satellite Systems estimate that the Direct Fusion Drive may be capable of producing between 5–10 Newtons[4] thrust per each MW of generated fusion power,[9] with a specific impulse (Isp) of about 10,000 seconds and 200 kW available as electrical power.[8] Approximately 35% of the fusion power goes to thrust, 30% to electric power, 25% lost to heat, and 10% is recirculated for the RF heating.[4]

The company's modeling shows that this technology could propel a spacecraft with a mass of about 1,000 kg (2,200 lb) to Pluto in four years,[8] enabling deep space missions.[13] DFD generates extra power so it may provide approximately 2 MW of power to the payloads upon arrival. this allows more options for instrument selection and laser/optical communications,[4][8] and even transfer up to 50 KW of power from the orbiter to the lander through a laser beam operating at 1080 nm wavelength.[4]

Princeton Satellite Systems says that this technology can expand the scientific capability of planetary missions.[8] This power/propulsion technology has been suggested to be used on a Pluto orbiter and lander mission,[4][8] or as integration on the Orion spacecraft to transport a crewed mission to Mars in a faster time frame[14][15] (4 months instead of 9 with current technology).[10] DFD is projected to deliver scientific payloads to Titan in 2.6 years.[16]

See also

References

  1. ^ Elvis, Martin (2021). Asteroids how love, fear, and greed will determine our future in space. Yale University Press. p. 158. ISBN 978-0-300-25838-7. OCLC 1264136457.
  2. ^ "The Direct Fusion Drive That Could Get Us to Saturn in Just 2 Years". Popular Mechanics. 2020-10-21. Retrieved 2023-01-08.
  3. ^ Ford, Priyanca. "Council Post: The Race To Carbon Neutral: Fusion Energy And Machine Learning". Forbes. Retrieved 2023-01-08.
  4. ^ a b c d e f g h i j k Thomas, Stephanie (2017-02-07). Fusion-Enabled Pluto Orbiter and Lander (PDF) (Report).
  5. ^ "The Direct Fusion Drive Rocket". www.npl.washington.edu. Retrieved 2023-11-28.
  6. ^ Razin, Yosef S.; Pajer, Gary; Breton, Mary; Ham, Eric; Mueller, Joseph; Paluszek, Michael; Glasser, Alan H.; Cohen, Samuel A. (2014-12-01). "A direct fusion drive for rocket propulsion". Acta Astronautica. 105 (1): 145–155. doi:10.1016/j.actaastro.2014.08.008. ISSN 0094-5765. S2CID 109208384.
  7. ^ a b Paluszek, Michael (2015-06-02). "Direct Fusion Drive Quad Chart". Princeton Satellite Systems. Retrieved 2023-06-19.
  8. ^ a b c d e f Hall, Loura (April 5, 2017). "Fusion-Enabled Pluto Orbiter and Lander". NASA. Retrieved July 14, 2018.
  9. ^ a b Thomas, Stephanie J.; Paluszek, Michael; Cohen, Samuel A.; Glasser, Alexander (2018), "Nuclear and Future Flight Propulsion – Modeling the Thrust of the Direct Fusion Drive", 2018 Joint Propulsion Conference, American Institute of Aeronautics and Astronautics, doi:10.2514/6.2018-4769, ISBN 978-1-62410-570-8, S2CID 126347870, retrieved 2023-01-15
  10. ^ a b Husain, Zain (2016-10-01). "How Direct Fusion Drive will Revolutionize Space Travel". BrownSpaceman. Retrieved 2023-01-15.
  11. ^ "Megawatt Class Direct Fusion Drive For 25X ISP and 3 Times Faster to Pluto". Next Big Future. Retrieved 13 August 2021.
  12. ^ "Direct Fusion Drive technical animation". Princeton Satellite Systems. 2018-07-10. Retrieved 2023-06-19.
  13. ^ "Nuclear Technology Set to Propel and Power Future Space Missions, IAEA Panel Says". www.iaea.org. 2022-02-18. Retrieved 2023-01-08.
  14. ^ Mueller, Joseph (2013-08-08). "Direct Fusion Drive to Mars – A FISO Talk". Princeton Satellite Systems. Retrieved 2023-01-15.
  15. ^ Lemonick, Michael D. (2013-09-11). "Going to Mars via Fusion Power? Could Be". Time. ISSN 0040-781X. Retrieved 2023-01-15.
  16. ^ "Spacecraft design could get to Titan in only 2 years using a direct fusion drive". Phys.org.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Direct_Fusion_Drive&oldid=1193332157"