This is an old revision of this page, as edited by Monkbot(talk | contribs) at 18:40, 26 September 2019(→top: Task 16: replaced (1×) / removed (0×) deprecated |dead-url= and |deadurl= with |url-status=;). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Revision as of 18:40, 26 September 2019 by Monkbot(talk | contribs)(→top: Task 16: replaced (1×) / removed (0×) deprecated |dead-url= and |deadurl= with |url-status=;)
2 Shortwave uses a combination of AM, VSB, USB and LSB, with some NBFM and CW/morse code (in the case of time signal stations) as well as numerous frequencies, depending on the time of day/night, season, and solar activity level. A reasonably full list from 16 kHz to 27MHz can be found at [1]
3 Regions 1 and 3 also use Region 2's frequencies as well, with 50 to 100 kHz spacing.
