EtherCON
The EtherCON is a ruggedized and lockable connector for Ethernet over twisted pair wiring. It is manufactured by Neutrik and is designed for professional audio and stage lighting network applications.[1]
Design
The design is modeled after the XLR connector with a circular hard metal shell and a locking latch. The cable plug is always male and is designed to fit over a standard 8P8C modular connector. There are two cable connector versions: one for use during manufacturing of cables, and one that goes over an 8P8C (RJ-45) modular connector on existing cable. The chassis connector is always female and has the standard form factor of an XLR panel connector. The chassis connector allows for use with both an EtherCON connector and a standard 8P8C plug. The chassis connectors are rated for either Cat 5e, Cat 6, or Cat 6a compatibility, with the Category 5 and 6A models being cross-compatible (the Category 6 model utilizes a different shell design from the other models.) Neutrik makes two styles of connector, one for assembly before the RJ-45 connector is attached, and one that will fit over a pre-attached RJ-45.[2]
Applications
EtherCON connectors are often used with Tactical Ethernet cable to build Ethernet cables that can be used in high traffic areas with heavy foot or light vehicle traffic.[citation needed]
EtherCON connectors are used on many audio over Ethernet and audio over IP products.
References
- ^ "etherCON RJ45 Connectors". 2013-05-20. Retrieved 2019-12-06.
{{cite web}}: CS1 maint: url-status (link) - ^ Neutrik Product Guide 2012, Data Connectors. 2012-07-02[dead link]