Jump to content

Kaye effect

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Monkbot (talk | contribs) at 23:09, 13 December 2020 (Task 18 (cosmetic): eval 1 template: del empty params (2×);). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A falling stream of shampoo shows the Kaye Effect

The Kaye effect is a property of complex liquids which was first described by the British engineer Alan Kaye in 1963.[1]

While pouring one viscous mixture of an organic liquid onto a surface, the surface suddenly spouted an upcoming jet of liquid which merged with the downgoing one.

This phenomenon has since been discovered to be common in all shear-thinning liquids (liquids which thin under shear stress). Common household liquids with this property are liquid hand soaps, shampoos and non-drip paint. The effect usually goes unnoticed, however, because it seldom lasts more than about 300 milliseconds. The effect can be sustained by pouring the liquid onto a slanted surface, preventing the outgoing jet from intersecting the downward one (which tends to end the effect).

It is thought to occur when the downgoing stream "slips" off the pile it is forming, and due to a thin layer of shear-thinned liquid acting as a lubricant, does not combine with the pile. When the slipping stream reaches a dimple in the pile, it will shoot off it like a ramp, creating the effect.[citation needed]

References

  1. ^ Kaye, A. (1963). "A Bouncing Liquid Stream". Nature. 197 (4871): 1001. Bibcode:1963Natur.197.1001K. doi:10.1038/1971001a0.