The classical Carnot heat engine
In thermodynamics, an adiabatic process is one that occurs without transfer of heat or matter between a thermodynamic system and its surrounding. In an adiabatic process, energy is transferred only as work. The adiabatic process provides a rigorous conceptual basis for the theory used to expound the first law of thermodynamics, and as such it is a key concept in thermodynamics.
Some chemical and physical processes occur so rapidly that they may be conveniently described by the term "adiabatic approximation", meaning that there is not enough time for the transfer of energy as heat to take place to or from the system.
By way of example, the adiabatic flame temperature is an idealization that uses the "adiabatic approximation" so as to provide an upper limit calculation of temperatures produced by combustion of a fuel. The adiabatic flame temperature is the temperature that would be achieved by a flame if the process of combustion took place in the absence of heat loss to the surroundings.
- 1 Description
- 2 Adiabatic heating and cooling
- 3 Ideal gas (reversible process)
- 4 Graphing adiabats
- 5 Etymology
- 6 Conceptual significance in thermodynamic theory
- 7 Divergent usages of the word adiabatic
- 8 See also
- 9 References
- 10 External links
A process that does not involve the transfer of heat or matter into or out of a system, so that Q = 0, is called an adiabatic process, and such a system is said to be adiabatically isolated. The assumption that a process is adiabatic is a frequently made simplifying assumption. For example, the compression of a gas within a cylinder of an engine is assumed to occur so rapidly that on the time scale of the compression process, little of the system's energy can be transferred out as heat to the surroundings. Even though the cylinders are not insulated and are quite conductive, that process is idealized to be adiabatic. The same can be said to be true for the expansion process of such a system.
The assumption of adiabatic isolation of a system is a useful one, and is often combined with others so as to make the calculation of the system's behaviour possible. Such assumptions are idealizations. The behaviour of actual machines deviates from these idealizations, but the assumption of such "perfect" behaviour provide a useful first approximation of how the real world works. According to Laplace, when sound travels in a gas, there is no loss of heat in the medium and the propagation of sound is adiabatic. For such an adiabatic process, the modulus of elasticity (Young's modulus) can be expressed as E = γP, where γ is the ratio of specific heats at constant pressure and at constant volume (γ = Cp/ ) and P is the pressure of the gas .
Various applications of the adiabatic assumption
For a closed system, one may write the first law of thermodynamics as : ΔU = Q + W, where ΔU denotes the change of the system's internal energy (Q) the quantity of energy added to it as heat, and W the work done on it by its surroundings.
- If the system has rigid walls such that work cannot be transferred in or out (W = 0), and the walls of the system are not adiabatic and energy is added in the form of heat (Q > 0), and there is no phase change, the temperature of the system will rise.
- If the system has rigid walls such that pressure–volume work cannot be done, and the system walls are adiabatic (Q = 0), but energy is added as isochoric work in the form of friction or the stirring of a viscous fluid within the system (W > 0), and there is no phase change, the temperature of the system will rise.
- If the system walls are adiabatic (Q = 0), but not rigid (W ≠ 0), and, in a fictive idealized process, energy is added to the system in the form of frictionless, non-viscous pressure–volume work, and there is no phase change, the temperature of the system will rise. Such a process is called an isentropic process and is said to be "reversible". Fictively, if the process is reversed, the energy added as work can be recovered entirely as work done by the system. If the system contains a compressible gas and is reduced in volume, the uncertainty of the position of the gas is reduced, and seemingly would reduce the entropy of the system, but the temperature of the system will rise as the process is isentropic (ΔS = 0). Should the work be added in such a way that friction or viscous forces are operating within the system, then the process is not isentropic, and if there is no phase change, then the temperature of the system will rise, the process is said to be "irreversible", and the work added to the system is not entirely recoverable in the form of work.
- If the walls of a system are not adiabatic, and energy is transferred in as heat, entropy is transferred into the system with the heat. Such a process is neither adiabatic nor isentropic, having Q > 0, and ΔS > 0 according to the second law of thermodynamics.
Naturally occurring adiabatic processes are irreversible (entropy is produced).
The transfer of energy as work into an adiabatically isolated system can be imagined as being of two idealized extreme kinds. In one such kind, there is no entropy produced within the system (no friction, viscous dissipation, etc.), and the work is only pressure-volume work (denoted by P dV). In nature, this ideal kind occurs only approximately, because it demands an infinitely slow process and no sources of dissipation.
The other extreme kind of work is isochoric work (dV = 0), for which energy is added as work solely through friction or viscous dissipation within the system. A stirrer that transfers energy to a viscous fluid of an adiabatically isolated system with rigid walls, without phase change, will cause a rise in temperature of the fluid, but that work is not recoverable. Isochoric work is irreversible. The second law of thermodynamics observes that a natural process, of transfer of energy as work, always consists at least of isochoric work and often both of these extreme kinds of work. Every natural process, adiabatic or not, is irreversible, with ΔS > 0, as friction or viscosity are always present to some extent.
Adiabatic heating and cooling
The adiabatic compression of a gas causes a rise in temperature of the gas. Adiabatic expansion against pressure, or a spring, causes a drop in temperature. In contrast, free expansion is an isothermal process for an ideal gas.
Adiabatic heating occurs when the pressure of a gas is increased from work done on it by its surroundings, e.g., a piston compressing a gas contained within an adiabatic cylinder. This finds practical application in diesel engines which rely on the lack of quick heat dissipation during their compression stroke to elevate the fuel vapor temperature sufficiently to ignite it.
Adiabatic heating occurs in the Earth's atmosphere when an air mass descends, for example, in a katabatic wind, Foehn wind, or chinook wind flowing downhill over a mountain range. When a parcel of air descends, the pressure on the parcel increases. Due to this increase in pressure, the parcel's volume decreases and its temperature increases as work is done on the parcel of air, thus increasing its internal energy, which manifests itself by a rise in the temperature of that mass of air. The parcel of air can only slowly dissipate the energy by conduction or radiation (heat), and to a first approximation it can be considered adiabatically isolated and the process an adiabatic process.
Adiabatic cooling occurs when the pressure on an adiabatically isolated system is decreased, allowing it to expand, thus causing it to do work on its surroundings. When the pressure applied on a parcel of air is reduced, the air in the parcel is allowed to expand; as the volume increases, the temperature falls as its internal energy decreases. Adiabatic cooling occurs in the Earth's atmosphere with orographic lifting and lee waves, and this can form pileus or lenticular clouds.
Adiabatic cooling does not have to involve a fluid. One technique used to reach very low temperatures (thousandths and even millionths of a degree above absolute zero) is via adiabatic demagnetisation, where the change in magnetic field on a magnetic material is used to provide adiabatic cooling. Also, the contents of an expanding universe can be described (to first order) as an adiabatically cooling fluid. (See heat death of the universe.)
In practice, no process is truly adiabatic. Many processes rely on a large difference in time scales of the process of interest and the rate of heat dissipation across a system boundary, and thus are approximated by using an adiabatic assumption. There is always some heat loss, as no perfect insulators exist.
Ideal gas (reversible process)
where P is pressure, V is volume, and for this case n = γ where
CP being the specific heat for constant pressure, CV being the specific heat for constant volume, γ is the adiabatic index, and f is the number of degrees of freedom (3 for monatomic gas, 5 for diatomic gas and collinear molecules e.g. carbon dioxide).
For a monatomic ideal gas, γ = 5/, and for a diatomic gas (such as nitrogen and oxygen, the main components of air) γ = 7/. Note that the above formula is only applicable to classical ideal gases and not Bose–Einstein or Fermi gases.
For reversible adiabatic processes, it is also true that
where T is an absolute temperature. This can also be written as
Example of adiabatic compression
The compression stroke in a gasoline engine can be used as an example of adiabatic compression. The model assumptions are: the uncompressed volume of the cylinder is one litre (1 l = 1000 cm3 = 0.001 m3 ); the gas within is the air consisting of molecular nitrogen and oxygen only (thus a diatomic gas with five degrees of freedom and so γ = 7/); the compression ratio of the engine is 10:1 (that is, the 1 l volume of uncompressed gas is reduced to 0.1 l by the piston); and the uncompressed gas is at approximately room temperature and pressure (a warm room temperature of ~27 °C or 300 K, and a pressure of 1 bar = 100 kPa, i.e. typical sea-level atmospheric pressure).
so our adiabatic constant for this example is about 6.31 Pa m4.2.
The gas is now compressed to a 0.1 l (0.0001 m3) volume (we will assume this happens quickly enough that no heat can enter or leave the gas through the walls). The adiabatic constant remains the same, but with the resulting pressure unknown
so solving for P:
or 25.1 bar. Note that this pressure increase is more than a simple 10:1 compression ratio would indicate; this is because the gas is not only compressed, but the work done to compress the gas also increases its internal energy which manifests itself by a rise in the gas's temperature and an additional rise in pressure above what would result from a simplistic calculation of 10 times the original pressure.
We can solve for the temperature of the compressed gas in the engine cylinder as well, using the ideal gas law, PV=nRT (n is amount of gas in mol and R the gas constant for that gas). Our initial conditions being 100 kPa of pressure, 1 l volume, and 300 K of temperature, our experimental constant (=nR) is:
We know the compressed gas has V = 0.1 l and P = ×106 Pa, so we can solve for temperature: 2.51
That is a final temperature of 753 K, or 479 °C, or 896 °F, well above the ignition point of many fuels. This is why a high-compression engine requires fuels specially formulated to not self-ignite (which would cause engine knocking when operated under these conditions of temperature and pressure), or that a supercharger with an intercooler to provide a pressure boost but with a lower temperature rise would be advantageous. A diesel engine operates under even more extreme conditions, with compression ratios of 20:1 or more being typical, in order to provide a very high gas temperature which ensures immediate ignition of the injected fuel.
Adiabatic free expansion of a gas
For an adiabatic free expansion of an ideal gas, the gas is contained in an insulated container and then allowed to expand in a vacuum. Because there is no external pressure for the gas to expand against, the work done by or on the system is zero. Since this process does not involve any heat transfer or work, the first law of thermodynamics then implies that the net internal energy change of the system is zero. For an ideal gas, the temperature remains constant because the internal energy only depends on temperature in that case. Since at constant temperature, the entropy is proportional to the volume, the entropy increases in this case, therefore this process is irreversible.
Derivation of P–V relation for adiabatic heating and cooling
The definition of an adiabatic process is that heat transfer to the system is zero, δQ = 0. Then, according to the first law of thermodynamics,
where dU is the change in the internal energy of the system and δW is work done by the system. Any work (δW) done must be done at the expense of internal energy U, since no heat δQ is being supplied from the surroundings. Pressure–volume work δW done by the system is defined as
However, P does not remain constant during an adiabatic process but instead changes along with V.
It is desired to know how the values of dP and dV relate to each other as the adiabatic process proceeds. For an ideal gas the internal energy is given by
Differentiating Equation (3) and use of the ideal gas law, PV = nRT, yields
Equation (4) is often expressed as dU = nCV dT because CV = αR.
Now substitute equations (2) and (4) into equation (1) to obtain
factorize −P dV:
and divide both sides by PV:
After integrating the left and right sides from V0 to V and from P0 to P and changing the sides respectively,
Exponentiate both sides, and substitute α + 1/ with γ, the heat capacity ratio
and eliminate the negative sign to obtain
Derivation of P–T relation for adiabatic heating and cooling
Substituting the ideal gas law into the above, we obtain
which simplifies to
Derivation of discrete formula
The change in internal energy of a system, measured from state 1 to state 2, is equal to
At the same time, the work done by the pressure-volume changes as a result from this process, is equal to
Since we require the process to be adiabatic, the following equation needs to be true
By the previous derivation,
Rearranging (4) gives
Substituting this into (2) gives
Substituting γ = α + 1/,
Using the ideal gas law and assuming a constant molar quantity (as often happens in practical cases),
By the continuous formula,
Substituting into the previous expression for W,
Substituting this expression and (1) in (3) gives
An adiabat is a curve of constant entropy on the P–V diagram. Some properties of adiabats on a P–V diagram are indicated. These properties may be read from the classical behaviour of ideal gases, except in the region where PV becomes small (low temperature), where quantum effects become important.
- Every adiabat asymptotically approaches both the V axis and the P axis (just like isotherms).
- Each adiabat intersects each isotherm exactly once.
- An adiabat looks similar to an isotherm, except that during an expansion, an adiabat loses more pressure than an isotherm, so it has a steeper inclination (more vertical).
- If isotherms are concave towards the north-east direction (45°), then adiabats are concave towards the east north-east (31°).
- If adiabats and isotherms are graphed at regular intervals of entropy and temperature, respectively (like altitude on a contour map), then as the eye moves towards the axes (towards the south-west), it sees the density of isotherms stay constant, but it sees the density of adiabats grow. The exception is very near absolute zero, where the density of adiabats drops sharply and they become rare (see Nernst's theorem).[clarification needed]
The following diagram is a P–V diagram with a superposition of adiabats and isotherms:
The isotherms are the red curves and the adiabats are the black curves.
The adiabats are isentropic.
Volume is the horizontal axis and pressure is the vertical axis.
The term adiabatic //, literally means 'not to be passed through'. It is formed from the ancient Greek privative ἀ- ("not") and διαβατός, "able to be passed through", in turn deriving from διά ("through"), and βαῖνειν ("to walk, go, come"), thus ἀδιάβατος. According to Maxwell, and to Partington, the term was introduced by Rankine.
The etymological origin corresponds here to an impossibility of transfer of energy as heat and of transfer of matter across the wall.
Conceptual significance in thermodynamic theory
The adiabatic process has been important for thermodynamics since its early days. It was important in the work of Joule, because it provided a way of nearly directly relating quantities of heat and work.
For a thermodynamic system that is enclosed by walls that do not allow mass transfer, energy can pass in and out only as heat or work. Thus a quantity of work can be related almost directly to an equivalent quantity of heat in a cycle of two limbs. The first is an isochoric adiabatic work process that adds to the system's internal energy. Then an isochoric and workless heat transfer returns the system to its original state. The first limb adds a definite amount of energy and the second removes it. Accordingly, Rankine measured quantity of heat in units of work, rather than as a calorimetric quantity . In 1854, Rankine used a quantity that he called "the thermodynamic function" that later was called entropy, and at that time he wrote also of the "curve of no transmission of heat", which he later called an adiabatic curve. Besides it two isothermal limbs, Carnot's cycle has two adiabatic limbs.
For the foundations of thermodynamics, the conceptual importance of this was emphasized by Bryan, by Carathéodory, and by Born. The reason is that calorimetry presupposes a type of temperature as already defined before the statement of the first law of thermodynamics, such as one based on empirical scales. Such a presupposition involves making the distinction between empirical temperature and absolute temperature. Rather, the definition of absolute thermodynamic temperature is best left till the second law is available as a conceptual basis.
In the eighteenth century, the law of conservation of energy was yet to be fully formulated or established, and the nature of heat was debated. One approach to these problems was to regard heat, measured by calorimetry, as a primary substance that is conserved in quantity. By the middle of the nineteenth century, it was recognized as a form of energy, and the law of conservation of energy was thereby also recognized. The view that eventually established itself, and is currently regarded as right, is that the law of conservation of energy is a primary axiom, and that heat is to be analyzed as consequential. In this light, heat cannot be a component of the total energy of a single body because it is not a state variable, but, rather, is a variable that describes a process of transfer between two bodies. The adiabatic process is important because it is a logical ingredient of this current view.
Divergent usages of the word adiabatic
This present article is written from the viewpoint of macroscopic thermodynamics, and the word adiabatic is used in this article in the traditional way of thermodynamics, introduced by Rankine. It is pointed out in the present article that, for example, if a compression of a gas is rapid, then there is little time for heat transfer to occur, even when the gas is not adiabatically isolated by a definite wall. In this sense, a rapid compression of a gas is sometimes approximately or loosely said to be adiabatic, though often far from isentropic, even when the gas is not adiabatically isolated by a definite wall.
Quantum mechanics and quantum statistical mechanics, however, use the word adiabatic in a very different sense, one that can at times seem almost opposite to the classical thermodynamic sense. In quantum theory, the word adiabatic can mean something perhaps near isentropic, or perhaps near quasi-static, but the usage of the word is very different between the two disciplines.
On the one hand, in quantum theory, if a perturbative element of compressive work is done almost infinitely slowly (that is to say quasi-statically), it is said to have been done adiabatically. The idea is that the shapes of the eigenfunctions change slowly and continuously, so that no quantum jump is triggered, and the change is virtually reversible. While the occupation numbers are unchanged, nevertheless there is change in the energy levels of one-to-one corresponding, pre- and post-compression, eigenstates. Thus a perturbative element of work has been done without heat transfer and without introduction of random change within the system. For example, Max Born writes "Actually, it is usually the 'adiabatic' case with which we have to do: i.e. the limiting case where the external force (or the reaction of the parts of the system on each other) acts very slowly. In this case, to a very high approximation
that is, there is no probability for a transition, and the system is in the initial state after cessation of the perturbation. Such a slow perturbation is therefore reversible, as it is classically."
On the other hand, in quantum theory, if a perturbative element of compressive work is done rapidly, it randomly changes the occupation numbers of the eigenstates, as well as changing their shapes. In that theory, such a rapid change is said not to be adiabatic, and the contrary word diabatic is applied to it. One might guess that perhaps Clausius, if he were confronted with this, in the now-obsolete language he used in his day, would have said that "internal work" was done and that 'heat was generated though not transferred'.
In classical thermodynamics, such a rapid change would still be called adiabatic because the system is adiabatically isolated, and there is no transfer of energy as heat. The strong irreversibility of the change, due to viscosity or other entropy production, does not impinge on this classical usage.
Thus for a mass of gas, in macroscopic thermodynamics, words are so used that a compression is sometimes loosely or approximately said to be adiabatic if it is rapid enough to avoid heat transfer, even if the system is not adiabatically isolated. But in quantum statistical theory, a compression is not called adiabatic if it is rapid, even if the system is adiabatically isolated in the classical thermodynamic sense of the term. The words are used differently in the two disciplines, as stated just above.
- Cyclic process
- First law of thermodynamics
- Heat burst
- Isobaric process
- Isenthalpic process
- Isentropic process
- Isochoric process
- Isothermal process
- Polytropic process
- Entropy (classical thermodynamics)
- Quasistatic process
- Total air temperature
- Magnetic refrigeration
- Carathéodory, C. (1909). "Untersuchungen über die Grundlagen der Thermodynamik". Mathematische Annalen. 67: 355–386. doi:10.1007/BF01450409.. A translation may be found here. Also a mostly reliable translation is to be found in Kestin, J. (1976). The Second Law of Thermodynamics. Stroudsburg, PA: Dowden, Hutchinson & Ross.
- Bailyn, M. (1994). A Survey of Thermodynamics. New York, NY: American Institute of Physics Press. p. 21. ISBN 0-88318-797-3.
- Bailyn, M. (1994), pp. 52–53.
- Tisza, L. (1966). Generalized Thermodynamics. Cambridge, MA: MIT Press. p. 48.
(adiabatic partitions inhibit the transfer of heat and mass)
- Münster, A. (1970), p. 48: "mass is an adiabatically inhibited variable."
- Münster, A. (1970). Classical Thermodynamics. Translated by Halberstadt, E. S. London: Wiley–Interscience. p. 45. ISBN 0-471-62430-6.
- Kavanagh, J. L.; Sparks, R. S. J. (2009). "Temperature changes in ascending kimberlite magmas". Earth and Planetary Science Letters. Elsevier. 286 (3–4): 404–413. Bibcode:2009E&PSL.286..404K. doi:10.1016/j.epsl.2009.07.011. Retrieved 18 February 2012.
- Adiabatic Processes
- Liddell, H.G., Scott, R. (1940). A Greek-English Lexicon, Clarendon Press, Oxford UK.
- Maxwell, J. C. (1871), Theory of Heat (first ed.), London: Longmans, Green and Co., p. 129
- Partington, J. R. (1949), An Advanced Treatise on Physical Chemistry., volume 1, Fundamental Principles. The Properties of Gases, London: Longmans, Green and Co., p. 122
- Rankine, W.J.McQ. (1866). On the theory of explosive gas engines, The Engineer, July 27, 1866; at page 467 of the reprint in Miscellaneous Scientific Papers, edited by W.J. Millar, 1881, Charles Griffin, London.
- Rankine, W. J. M. (1854). "On the geometrical representation of the expansive action of heat, and theory of thermodynamic engines". Proc. Roy. Soc. 144: 115–175. Miscellaneous Scientific Papers p. 339
- Rankine, W. J. M. (1854). "On the geometrical representation of the expansive action of heat, and theory of thermodynamic engines". Proc. Roy. Soc. 144: 115–175. Miscellaneous Scientific Papers p. 341.
- Bryan, G. H. (1907). Thermodynamics. An Introductory Treatise dealing mainly with First Principles and their Direct Applications. Leipzig: B. G. Teubner.
- Born, M. (1949). "Natural Philosophy of Cause and Chance". London: Oxford University Press.
- Bailyn, M. (1994). "Chapter 3". A Survey of Thermodynamics. New York, NY: American Institute of Physics. ISBN 0-88318-797-3.
- Born, M. (1927). "Physical aspects of quantum mechanics". Nature. 119: 354–357. (Translation by Robert Oppenheimer.)
- Silbey, Robert J.; et al. (2004). Physical chemistry. Hoboken: Wiley. p. 55. ISBN 978-0-471-21504-2.
- Broholm, Collin. "Adiabatic free expansion." Physics & Astronomy @ Johns Hopkins University. N.p., 26 Nov. 1997. Web. 14 Apr. *Nave, Carl Rod. "Adiabatic Processes." HyperPhysics. N.p., n.d. Web. 14 Apr. 2011. .
- Thorngren, Dr. Jane R.. "Adiabatic Processes." Daphne – A Palomar College Web Server. N.p., 21 July 1995. Web. 14 Apr. 2011. .