Advanced Audio Coding
|Filename extension||MPEG/3GPP container
|Internet media type|
|Developed by||Bell, Fraunhofer, Dolby, Sony, Nokia, LG Electronics, NEC, NTT Docomo, Panasonic|
|Type of format||Audio compression format, Lossy compression|
|Contained by||MPEG-4 Part 14, 3GP and 3G2, ISO base media file format and Audio Data Interchange Format (ADIF)|
Advanced Audio Coding (AAC) is an audio coding standard for lossy digital audio compression. Designed to be the successor of the MP3 format, AAC generally achieves higher sound quality than MP3 at the same bit rate.
AAC has been standardized by ISO and IEC, as part of the MPEG-2 and MPEG-4 specifications. Part of AAC, HE-AAC ("AAC+"), is part of MPEG-4 Audio and also adopted into digital radio standards DAB+ and Digital Radio Mondiale, as well as mobile television standards DVB-H and ATSC-M/H.
AAC supports inclusion of 48 full-bandwidth (up to 96 kHz) audio channels in one stream plus 16 low frequency effects (LFE, limited to 120 Hz) channels, up to 16 "coupling" or dialog channels, and up to 16 data streams. The quality for stereo is satisfactory to modest requirements at 96 kbit/s in joint stereo mode; however, hi-fi transparency demands data rates of at least 128 kbit/s (VBR). Tests of MPEG-4 audio have shown that AAC meets the requirements referred to as "transparent" for the ITU at 128 kbit/s for stereo, and 320 kbit/s for 5.1 audio. AAC uses a purely modified discrete cosine transform (MDCT) algorithm, giving it higher compression efficiency than MP3, which uses a hybrid coding algorithm that is part MDCT and part FFT.
AAC is the default or standard audio format for iPhone, iPod, iPad, Nintendo DSi, Nintendo 3DS, iTunes, DivX Plus Web Player, PlayStation 3 and various Nokia Series 40 phones. It is supported on PlayStation Vita, Wii (with the Photo Channel 1.1 update installed), Sony Walkman MP3 series and later, Android and BlackBerry. AAC is also supported by manufacturers of in-dash car audio systems.[when?][vague]
The discrete cosine transform (DCT), a type of transform coding for lossy compression, was proposed by Nasir Ahmed in 1972, and developed by Ahmed with T. Natarajan and K. R. Rao in 1973, publishing their results in 1974. This led to the development of the modified discrete cosine transform (MDCT), proposed by J. P. Princen, A. W. Johnson and A. B. Bradley in 1987, following earlier work by Princen and Bradley in 1986. The MP3 audio coding standard introduced in 1994 used a hybrid coding algorithm that is part MDCT and part FFT. AAC uses a purely MDCT algorithm, giving it higher compression efficiency than MP3.
AAC was developed with the cooperation and contributions of companies including Bell Labs, Fraunhofer IIS, Dolby Laboratories, LG Electronics, NEC, NTT Docomo, Panasonic, Sony Corporation, ETRI, JVC Kenwood, Philips, Microsoft, and NTT. It was officially declared an international standard by the Moving Picture Experts Group in April 1997. It is specified both as Part 7 of the MPEG-2 standard, and Subpart 4 in Part 3 of the MPEG-4 standard.
In 1997, AAC was first introduced as MPEG-2 Part 7, formally known as ISO/IEC 13818-7:1997. This part of MPEG-2 was a new part, since MPEG-2 already included MPEG-2 Part 3, formally known as ISO/IEC 13818-3: MPEG-2 BC (Backwards Compatible). Therefore, MPEG-2 Part 7 is also known as MPEG-2 NBC (Non-Backward Compatible), because it is not compatible with the MPEG-1 audio formats (MP1, MP2 and MP3).
MPEG-2 Part 7 defined three profiles: Low-Complexity profile (AAC-LC / LC-AAC), Main profile (AAC Main) and Scalable Sampling Rate profile (AAC-SSR). AAC-LC profile consists of a base format very much like AT&T's Perceptual Audio Coding (PAC) coding format, with the addition of temporal noise shaping (TNS), the Kaiser window (described below), a nonuniform quantizer, and a reworking of the bitstream format to handle up to 16 stereo channels, 16 mono channels, 16 low-frequency effect (LFE) channels and 16 commentary channels in one bitstream. The Main profile adds a set of recursive predictors that are calculated on each tap of the filterbank. The SSR uses a 4-band PQMF filterbank, with four shorter filterbanks following, in order to allow for scalable sampling rates.
In 1999, MPEG-2 Part 7 was updated and included in the MPEG-4 family of standards and became known as MPEG-4 Part 3, MPEG-4 Audio or ISO/IEC 14496-3:1999. This update included several improvements. One of these improvements was the addition of Audio Object Types which are used to allow interoperability with a diverse range of other audio formats such as TwinVQ, CELP, HVXC, Text-To-Speech Interface and MPEG-4 Structured Audio. Another notable addition in this version of the AAC standard is Perceptual Noise Substitution (PNS). In that regard, the AAC profiles (AAC-LC, AAC Main and AAC-SSR profiles) are combined with perceptual noise substitution and are defined in the MPEG-4 audio standard as Audio Object Types. MPEG-4 Audio Object Types are combined in four MPEG-4 Audio profiles: Main (which includes most of the MPEG-4 Audio Object Types), Scalable (AAC LC, AAC LTP, CELP, HVXC, TwinVQ, Wavetable Synthesis, TTSI), Speech (CELP, HVXC, TTSI) and Low Rate Synthesis (Wavetable Synthesis, TTSI).
The MPEG-4 Audio Version 2 (ISO/IEC 14496-3:1999/Amd 1:2000) defined new audio object types: the low delay AAC (AAC-LD) object type, bit-sliced arithmetic coding (BSAC) object type, parametric audio coding using harmonic and individual line plus noise and error resilient (ER) versions of object types. It also defined four new audio profiles: High Quality Audio Profile, Low Delay Audio Profile, Natural Audio Profile and Mobile Audio Internetworking Profile.
The HE-AAC Profile (AAC LC with SBR) and AAC Profile (AAC LC) were first standardized in ISO/IEC 14496-3:2001/Amd 1:2003. The HE-AAC v2 Profile (AAC LC with SBR and Parametric Stereo) was first specified in ISO/IEC 14496-3:2005/Amd 2:2006. The Parametric Stereo audio object type used in HE-AAC v2 was first defined in ISO/IEC 14496-3:2001/Amd 2:2004.
The current version of the AAC standard is defined in ISO/IEC 14496-3:2009.
The MPEG-4 Part 3 standard also contains other ways of compressing sound. These include lossless compression formats, synthetic audio and low bit-rate compression formats generally used for speech.
AAC's improvements over MP3
Blind tests in the late 1990s showed that AAC demonstrated greater sound quality and transparency than MP3 for files coded at the same bit rate.
- more sample rates (from 8 to 96 kHz) than MP3 (16 to 48 kHz);
- up to 48 channels (MP3 supports up to two channels in MPEG-1 mode and up to 5.1 channels in MPEG-2 mode);
- arbitrary bit rates and variable frame length. Standardized constant bit rate with bit reservoir;
- higher efficiency and simpler filter bank. AAC uses a pure MDCT (modified discrete cosine transform), rather than MP3's hybrid coding (which was part MDCT and part FFT);
- higher coding efficiency for stationary signals (AAC uses a blocksize of 1024 or 960 samples, allowing more efficient coding than MP3's 576 sample blocks);
- higher coding accuracy for transient signals (AAC uses a blocksize of 128 or 120 samples, allowing more accurate coding than MP3's 192 sample blocks);
- possibility to use Kaiser-Bessel derived window function to eliminate spectral leakage at the expense of widening the main lobe;
- much better handling of audio frequencies above 16 kHz;
- more flexible joint stereo (different methods can be used in different frequency ranges);
- additional modules (tools) added to increase compression efficiency: TNS, backwards prediction, perceptual noise substitution (PNS), etc. These modules can be combined to constitute different encoding profiles.
Overall, the AAC format allows developers more flexibility to design codecs than MP3 does, and corrects many of the design choices made in the original MPEG-1 audio specification. This increased flexibility often leads to more concurrent encoding strategies and, as a result, to more efficient compression. This is especially true at very low bit rates where the superior stereo coding, pure MDCT, and better transform window sizes leave MP3 unable to compete.
While the MP3 format has near-universal hardware and software support, primarily because MP3 was the format of choice during the crucial first few years of widespread music file-sharing/distribution over the internet, AAC is a strong contender due to some unwavering industry support.
AAC is a wideband audio coding algorithm that exploits two primary coding strategies to dramatically reduce the amount of data needed to represent high-quality digital audio:
- Signal components that are perceptually irrelevant are discarded.
- Redundancies in the coded audio signal are eliminated.
The actual encoding process consists of the following steps:
- The signal is converted from time-domain to frequency-domain using forward modified discrete cosine transform (MDCT). This is done by using filter banks that take an appropriate number of time samples and convert them to frequency samples.
- The frequency domain signal is quantized based on a psychoacoustic model and encoded.
- Internal error correction codes are added.
- The signal is stored or transmitted.
- In order to prevent corrupt samples, a modern implementation of the Luhn mod N algorithm is applied to each frame.
The MPEG-4 audio standard does not define a single or small set of highly efficient compression schemes but rather a complex toolbox to perform a wide range of operations from low bit rate speech coding to high-quality audio coding and music synthesis.
- The MPEG-4 audio coding algorithm family spans the range from low bit rate speech encoding (down to 2 kbit/s) to high-quality audio coding (at 64 kbit/s per channel and higher).
- AAC offers sampling frequencies between 8 kHz and 96 kHz and any number of channels between 1 and 48.
- In contrast to MP3's hybrid filter bank, AAC uses the modified discrete cosine transform (MDCT) together with the increased window lengths of 1024 or 960 points.
AAC encoders can switch dynamically between a single MDCT block of length 1024 points or 8 blocks of 128 points (or between 960 points and 120 points, respectively).
- If a signal change or a transient occurs, 8 shorter windows of 128/120 points each are chosen for their better temporal resolution.
- By default, the longer 1024-point/960-point window is otherwise used because the increased frequency resolution allows for a more sophisticated psychoacoustic model, resulting in improved coding efficiency.
AAC takes a modular approach to encoding. Depending on the complexity of the bitstream to be encoded, the desired performance and the acceptable output, implementers may create profiles to define which of a specific set of tools they want to use for a particular application.
- Low Complexity (LC) – the simplest and most widely used and supported
- Main Profile (Main) – like the LC profile, with the addition of backwards prediction
- Scalable Sample Rate (SSR) a.k.a. Sample-Rate Scalable (SRS)
The MPEG-4 Part 3 standard (MPEG-4 Audio) defined various new compression tools (a.k.a. Audio Object Types) and their usage in brand new profiles. AAC is not used in some of the MPEG-4 Audio profiles. The MPEG-2 Part 7 AAC LC profile, AAC Main profile and AAC SSR profile are combined with Perceptual Noise Substitution and defined in the MPEG-4 Audio standard as Audio Object Types (under the name AAC LC, AAC Main and AAC SSR). These are combined with other Object Types in MPEG-4 Audio profiles. Here is a list of some audio profiles defined in the MPEG-4 standard:
- Main Audio Profile – defined in 1999, uses most of the MPEG-4 Audio Object Types (AAC Main, AAC-LC, AAC-SSR, AAC-LTP, AAC Scalable, TwinVQ, CELP, HVXC, TTSI, Main synthesis)
- Scalable Audio Profile – defined in 1999, uses AAC-LC, AAC-LTP, AAC Scalable, TwinVQ, CELP, HVXC, TTSI
- Speech Audio Profile – defined in 1999, uses CELP, HVXC, TTSI
- Synthetic Audio Profile – defined in 1999, TTSI, Main synthesis
- High Quality Audio Profile – defined in 2000, uses AAC-LC, AAC-LTP, AAC Scalable, CELP, ER-AAC-LC, ER-AAC-LTP, ER-AAC Scalable, ER-CELP
- Low Delay Audio Profile – defined in 2000, uses CELP, HVXC, TTSI, ER-AAC-LD, ER-CELP, ER-HVXC
- Low Delay AAC v2 - defined in 2012, uses AAC-LD, AAC-ELD and AAC-ELDv2
- Mobile Audio Internetworking Profile – defined in 2000, uses ER-AAC-LC, ER-AAC-Scalable, ER-TwinVQ, ER-BSAC, ER-AAC-LD
- AAC Profile – defined in 2003, uses AAC-LC
- High Efficiency AAC Profile – defined in 2003, uses AAC-LC, SBR
- High Efficiency AAC v2 Profile – defined in 2006, uses AAC-LC, SBR, PS
One of many improvements in MPEG-4 Audio is an Object Type called Long Term Prediction (LTP), which is an improvement of the Main profile using a forward predictor with lower computational complexity.
AAC error protection toolkit
Applying error protection enables error correction up to a certain extent. Error correcting codes are usually applied equally to the whole payload. However, since different parts of an AAC payload show different sensitivity to transmission errors, this would not be a very efficient approach.
The AAC payload can be subdivided into parts with different error sensitivities.
- Independent error correcting codes can be applied to any of these parts using the Error Protection (EP) tool defined in MPEG-4 Audio standard.
- This toolkit provides the error correcting capability to the most sensitive parts of the payload in order to keep the additional overhead low.
- The toolkit is backwardly compatible with simpler and pre-existing AAC decoders. A great deal of the toolkit's error correction functions are based around spreading information about the audio signal more evenly in the datastream.
Error Resilient (ER) AAC
Error Resilience (ER) techniques can be used to make the coding scheme itself more robust against errors.
For AAC, three custom-tailored methods were developed and defined in MPEG-4 Audio
- Huffman Codeword Reordering (HCR) to avoid error propagation within spectral data
- Virtual Codebooks (VCB11) to detect serious errors within spectral data
- Reversible Variable Length Code (RVLC) to reduce error propagation within scale factor data
AAC Low Delay
The audio coding standards MPEG-4 Low Delay, Enhanced Low Delay and Enhanced Low Delay v2 (AAC-LD, AAC-ELD, AAC-ELDv2) as defined in ISO/IEC 14496-3:2009 and ISO/IEC 14496-3:2009/Amd 3 are designed to combine the advantages of perceptual audio coding with the low delay necessary for two-way communication. They are closely derived from the MPEG-2 Advanced Audio Coding (AAC) format. AAC-ELD is recommended by GSMA as super-wideband voice codec in the IMS Profile for High Definition Video Conference (HDVC) Service.
Licensing and patents
No licenses or payments are required for a user to stream or distribute content in AAC format. This reason alone might have made AAC a more attractive format to distribute content than its predecessor MP3, particularly for streaming content (such as Internet radio) depending on the use case.
However, a patent license is[when?] required for all manufacturers or developers of AAC codecs. For this reason, free and open source software implementations such as FFmpeg and FAAC may be distributed in source form only, in order to avoid patent infringement. (See below under Products that support AAC, Software.)
Extensions and improvements
Some extensions have been added to the first AAC standard (defined in MPEG-2 Part 7 in 1997):
- Perceptual Noise Substitution (PNS), added in MPEG-4 in 1999. It allows the coding of noise as pseudorandom data.
- Long Term Predictor (LTP), added in MPEG-4 in 1999. It is a forward predictor with lower computational complexity.
- Error Resilience (ER), added in MPEG-4 Audio version 2 in 2000, used for transport over error prone channels
- AAC-LD (Low Delay), defined in 2000, used for real-time conversation applications
- High Efficiency AAC (HE-AAC), a.k.a. aacPlus v1 or AAC+, the combination of SBR (Spectral Band Replication) and AAC LC. Used for low bitrates. Defined in 2003.
- HE-AAC v2, a.k.a. aacPlus v2 or eAAC+, the combination of Parametric Stereo (PS) and HE-AAC; used for even lower bitrates. Defined in 2004 and 2006.
- MPEG-4 Scalable To Lossless (SLS), defined in 2006, can supplement an AAC stream to provide a lossless decoding option, such as in Fraunhofer IIS's "HD-AAC" product
In addition to the MP4, 3GP and other container formats based on ISO base media file format for file storage, AAC audio data was first packaged in a file for the MPEG-2 standard using Audio Data Interchange Format (ADIF), consisting of a single header followed by the raw AAC audio data blocks. However, if the data is to be streamed within an MPEG-2 transport stream, a self-synchronizing format called an Audio Data Transport Stream (ADTS) is used, consisting of a series of frames, each frame having a header followed by the AAC audio data. This file and streaming-based format are defined in MPEG-2 Part 7, but are only considered informative by MPEG-4, so an MPEG-4 decoder does not need to support either format. These containers, as well as a raw AAC stream, may bear the .aac file extension. MPEG-4 Part 3 also defines its own self-synchronizing format called a Low Overhead Audio Stream (LOAS) that encapsulates not only AAC, but any MPEG-4 audio compression scheme such as TwinVQ and ALS. This format is what was defined for use in DVB transport streams when encoders use either SBR or parametric stereo AAC extensions. However, it is restricted to only a single non-multiplexed AAC stream. This format is also referred to as a Low Overhead Audio Transport Multiplex (LATM), which is just an interleaved multiple stream version of a LOAS.
Products that support AAC
This section needs additional citations for verification. (September 2017) (Learn how and when to remove this template message)
In December 2003, Japan started broadcasting terrestrial DTV ISDB-T standard that implements MPEG-2 video and MPEG-2 AAC audio. In April 2006 Japan started broadcasting the ISDB-T mobile sub-program, called 1seg, that was the first implementation of video H.264/AVC with audio HE-AAC in Terrestrial HDTV broadcasting service on the planet.
In December 2007, Brazil started broadcasting terrestrial DTV standard called International ISDB-Tb that implements video coding H.264/AVC with audio AAC-LC on main program (single or multi) and video H.264/AVC with audio HE-AACv2 in the 1seg mobile sub-program.
The ETSI, the standards governing body for the DVB suite, supports AAC, HE-AAC and HE-AAC v2 audio coding in DVB applications since at least 2004. DVB broadcasts which use the H.264 compression for video normally use HE-AAC for audio.
iTunes and iPod
In April 2003, Apple brought mainstream attention to AAC by announcing that its iTunes and iPod products would support songs in MPEG-4 AAC format (via a firmware update for older iPods). Customers could download music in a closed-source Digital Rights Management (DRM)-restricted form of AAC (see FairPlay) via the iTunes Store or create files without DRM from their own CDs using iTunes. In later years, Apple began offering music videos and movies, which also use AAC for audio encoding.
On May 29, 2007, Apple began selling songs and music videos free of DRM from participating record labels. These files mostly adhere to the AAC standard and are playable on many non-Apple products but they do include custom iTunes information such as album artwork and a purchase receipt, so as to identify the customer in case the file is leaked out onto peer-to-peer networks. It is possible, however, to remove these custom tags to restore interoperability with players that conform strictly to the AAC specification. As of January 6, 2009, nearly all music on the USA regioned iTunes Store became DRM-free, with the remainder becoming DRM-free by the end of March 2009.
iTunes supports a "Variable Bit Rate" (VBR) encoding option which encodes AAC tracks in an "Average Bit Rate" (ABR) scheme. As of September 2009, Apple has added support for HE-AAC (which is fully part of the MP4 standard) only for radio streams, not file playback, and iTunes still lacks support for true VBR encoding. The underlying QuickTime API does offer a true VBR encoding profile however.
Other portable players
- Cowon (unofficially supported on some models)
- Creative Zen Portable
- Nintendo 3DS
- Nintendo DSi
- Philips GoGear Muse
- PlayStation Portable (PSP) with firmware 2.0 or greater
- Samsung YEPP
- SanDisk Sansa (some models)
- Any portable player that fully supports the Rockbox third party firmware
For a number of years, many mobile phones from manufacturers such as Nokia, Motorola, Samsung, Sony Ericsson, BenQ-Siemens and Philips have supported AAC playback. The first such phone was the Nokia 5510 released in 2002 which also plays MP3s. However, this phone was a commercial failure and such phones with integrated music players did not gain mainstream popularity until 2005 when the trend of having AAC as well as MP3 support continued. Most new smartphones and music-themed phones support playback of these formats.
- Sony Ericsson phones support various AAC formats in MP4 container. AAC-LC is supported in all phones beginning with K700, phones beginning with W550 have support of HE-AAC. The latest devices such as the P990, K610, W890i and later support HE-AAC v2.
- Nokia XpressMusic and other new generation Nokia multimedia phones like N- and E-Series also support AAC format in LC, HE, M4A and HEv2 profiles. These also supports playing LTP-encoded AAC audio.
- BlackBerry phones running the BlackBerry 10 operating system support AAC playback natively. Select previous generation BlackBerry OS devices also support AAC.
- bada OS
- Apple's iPhone supports AAC and FairPlay protected AAC files formerly used as the default encoding format in the iTunes Store until the removal of DRM restrictions in March 2009.
- Android 2.3 and later supports AAC-LC, HE-AAC and HE-AAC v2 in MP4 or M4A containers along with several other audio formats. Android 3.1 and later supports raw ADTS files. Android 4.1 can encode AAC.
- WebOS by HP/Palm supports AAC, AAC+, eAAC+, and .m4a containers in its native music player as well as several third-party players. However, it does not support Apple's FairPlay DRM files downloaded from iTunes.
- Windows Phone's Silverlight runtime supports AAC-LC, HE-AAC and HE-AAC v2 decoding.
- Apple's iPad: Supports AAC and FairPlay protected AAC files used as the default encoding format in the iTunes Store
- Palm OS PDAs: Many Palm OS based PDAs and smartphones can play AAC and HE-AAC with the 3rd party software Pocket Tunes. Version 4.0, released in December 2006, added support for native AAC and HE-AAC files. The AAC codec for TCPMP, a popular video player, was withdrawn after version 0.66 due to patent issues, but can still be downloaded from sites other than corecodec.org. CorePlayer, the commercial follow-on to TCPMP, includes AAC support. Other Palm OS programs supporting AAC include Kinoma Player and AeroPlayer.
- Windows Mobile: Supports AAC either by the native Windows Media Player or by third-party products (TCPMP, CorePlayer)
- Epson: Supports AAC playback in the P-2000 and P-4000 Multimedia/Photo Storage Viewers
- Sony Reader: plays M4A files containing AAC, and displays metadata created by iTunes. Other Sony products, including the A and E series Network Walkmans, support AAC with firmware updates (released May 2006) while the S series supports it out of the box.
- Sonos Digital Media Player: supports playback of AAC files
- Barnes & Noble Nook Color: supports playback of AAC encoded files
- Roku SoundBridge: a network audio player, supports playback of AAC encoded files
- Squeezebox: network audio player (made by Slim Devices, a Logitech company) that supports playback of AAC files
- PlayStation 3: supports encoding and decoding of AAC files
- Xbox 360: supports streaming of AAC through the Zune software, and of supported iPods connected through the USB port
- Wii: supports AAC files through version 1.1 of the Photo Channel as of December 11, 2007. All AAC profiles and bitrates are supported as long as it is in the .m4a file extension. This update removed MP3 compatibility, but users who have installed this may freely downgrade to the old version if they wish.
- Livescribe Pulse and Echo Smartpens: record and store audio in AAC format. The audio files can be replayed using the pen's integrated speaker, attached headphones, or on a computer using the Livescribe Desktop software. The AAC files are stored in the user's "My Documents" folder of the Windows OS and can be distributed and played without specialized hardware or software from Livescribe.
- Google Chromecast: supports playback of LC-AAC and HE-AAC audio
Almost all current computer media players include built-in decoders for AAC, or can utilize a library to decode it. On Microsoft Windows, DirectShow can be used this way with the corresponding filters to enable AAC playback in any DirectShow based player. Mac OS X supports AAC via the QuickTime libraries.
The following is a non-comprehensive list of other software player applications:
- 3ivx MPEG-4: a suite of DirectShow and QuickTime plugins which support AAC encoding or AAC/ HE-AAC decoding in any DirectShow application
- CorePlayer: also supports LC and HE AAC
- ffdshow: a free open source DirectShow filter for Microsoft Windows that uses FAAD2 to support AAC decoding
- foobar2000: a freeware audio player for Windows that supports LC and HE AAC
- Media Player Classic Home Cinema
- MPlayer or xine: often used as AAC decoders on Linux or Macintosh
- MusicBee: an advanced music manager and player that also supports encoding and ripping through a plugin
- RealPlayer: includes RealNetworks' RealAudio 10 AAC encoder
- Songbird: supports AAC on Windows, Linux and Mac OS X , including the DRM rights management encoding used for purchased music from the iTunes Store, with a plug-in
- Sony SonicStage
- VLC media player: supports playback and encoding of MP4 and raw AAC files
- Winamp for Windows: includes an AAC encoder that supports LC and HE AAC
- Windows Media Player 12: released with Windows 7, supports playback of AAC files natively
- Another Real: Rhapsody supports the RealAudio AAC codec, in addition to offering subscription tracks encoded with AAC
- XBMC: supports AAC (both LC and HE).
- XMMS: supports MP4 playback using a plugin provided by the faad2 library
Some of these players (e.g., foobar2000, Winamp, and VLC) also support the decoding of ADTS (Audio Data Transport Stream) using the SHOUTcast protocol. Plug-ins for Winamp and foobar2000 enable the creation of such streams.
Nero Digital Audio
In May 2006, Nero AG released an AAC encoding tool free of charge, Nero Digital Audio (the AAC codec portion has become Nero AAC Codec), which is capable of encoding LC-AAC, HE-AAC and HE-AAC v2 streams. The tool is a Command Line Interface tool only. A separate utility is also included to decode to PCM WAV.
FAAC and FAAD2
FAAC and FAAD2 stand for Freeware Advanced Audio Coder and Decoder 2 respectively. FAAC supports audio object types LC, Main and LTP. FAAD2 supports audio object types LC, Main, LTP, SBR and PS. Although FAAD2 is free software, FAAC is not free software.
Fraunhofer FDK AAC
FFmpeg and Libav
The native AAC encoder created in FFmpeg's libavcodec, and forked with Libav, was considered experimental and poor. A significant amount of work was done for the 3.0 release of FFmpeg (February 2016) to make its version usable and competitive with the rest of the AAC encoders. Libav has not merged this work and continues to use the older version of the AAC encoder. These encoders are LGPL-licensed open-source and can be built for any platform that the FFmpeg or Libav frameworks can be built.
Both FFmpeg and Libav can use the Fraunhofer FDK AAC library via libfdk-aac, and while the FFmpeg native encoder has become stable and good enough for common use, FDK is still considered the highest quality encoder available for use with FFmpeg. Libav also recommends using FDK AAC if it is available.
- Comparison of audio coding formats
- MPEG-4 Part 14 (container format)
- ALAC – Apple's own lossless codec
- Vorbis – the main open, royalty-free competitor to AAC and MP3
- Opus – an open, royalty-free codec for both pre-encoded and interactive use, standardized in 2012
- "Via Licensing Announces Updated AAC Joint Patent License". Business Wire. 5 January 2009. Retrieved 18 June 2019.
- ISO (1997). "ISO/IEC 13818-7:1997, Information technology -- Generic coding of moving pictures and associated audio information -- Part 7: Advanced Audio Coding (AAC)". Archived from the original on 2012-09-25. Retrieved 2010-07-18.
- Brandenburg, Karlheinz (1999). "MP3 and AAC Explained" (PDF). Archived (PDF) from the original on 2017-02-13.
- ISO (2006) ISO/IEC 13818-7:2006 - Information technology -- Generic coding of moving pictures and associated audio information -- Part 7: Advanced Audio Coding (AAC) Archived 2016-03-03 at the Wayback Machine, Retrieved on 2009-08-06
- ISO (2006) ISO/IEC 14496-3:2005 - Information technology -- Coding of audio-visual objects -- Part 3: Audio Archived 2016-04-13 at the Wayback Machine, Retrieved on 2009-08-06
- Ahmed, Nasir (January 1991). "How I Came Up With the Discrete Cosine Transform". Digital Signal Processing. 1 (1): 4–5. doi:10.1016/1051-2004(91)90086-Z.
- Ahmed, Nasir; Natarajan, T.; Rao, K. R. (January 1974), "Discrete Cosine Transform", IEEE Transactions on Computers, C-23 (1): 90–93, doi:10.1109/T-C.1974.223784
- Rao, K. R.; Yip, P. (1990), Discrete Cosine Transform: Algorithms, Advantages, Applications, Boston: Academic Press, ISBN 978-0-12-580203-1
- J. P. Princen, A. W. Johnson und A. B. Bradley: Subband/transform coding using filter bank designs based on time domain aliasing cancellation, IEEE Proc. Intl. Conference on Acoustics, Speech, and Signal Processing (ICASSP), 2161–2164, 1987
- John P. Princen, Alan B. Bradley: Analysis/synthesis filter bank design based on time domain aliasing cancellation, IEEE Trans. Acoust. Speech Signal Processing, ASSP-34 (5), 1153–1161, 1986
- Guckert, John (Spring 2012). "The Use of FFT and MDCT in MP3 Audio Compression" (PDF). University of Utah. Retrieved 14 July 2019.
- "AAC Licensors". Via Corp. Retrieved 15 January 2020.
- "ISO/IEC 14496-3:2009 - Information technology -- Coding of audio-visual objects -- Part 3: Audio" (PDF). ISO/IEC. 1 September 2009. Archived (PDF) from the original on 14 June 2011. Retrieved 2009-10-07. Cite journal requires
- "AAC". MPEG.ORG. Archived from the original on 3 October 2009. Retrieved 2009-10-28.
- "ISO/IEC 13818-7, Fourth edition, Part 7 - Advanced Audio Coding (AAC)" (PDF). ISO. 15 January 2006. Archived (PDF) from the original on 6 March 2009. Retrieved 2009-10-28.
- Bouvigne, Gabriel (2003). "MPEG-2/MPEG-4 - AAC". MP3'Tech. Archived from the original on 2010-01-05. Retrieved 2009-10-28.
- "MPEG Audio FAQ Version 9 - MPEG-1 and MPEG-2 BC". ISO. October 1998. Archived from the original on 2010-02-18. Retrieved 2009-10-28.
- "Florence Press Release". ISO. March 1996. Archived from the original on 2010-04-08. Retrieved 2009-10-28.
- Johnston, J. D. and Ferreira, A. J., "Sum-difference stereo transform coding", ICASSP '92, March 1992, pp. II-569-572.
- Sinha, D. and Johnston, J. D., "Audio compression at low bit rates using a signal adaptive switched filterbank", IEEE ASSP, 1996, pp. 1053-1057.
- Johnston, J. D., Sinha, D., Dorward, S. and Quackenbush, S., "AT&T perceptual audio coder (PAC)" in Collected Papers on Digital Audio Bit-Rate Reduction, Gilchrist, N. and Grewin, C. (Ed.), Audio Engineering Society, 1996.
- Herre, J. and Johnston, J. D., "Enhancing the performance of perceptual audio coders by using temporal noise shaping", AES 101st Convention, no. preprint 4384, 1996
- Brandenburg, Karlheinz; Kunz, Oliver; Sugiyama, Akihiko. "MPEG-4 Natural Audio Coding - Audio profiles and levels". chiariglione.org. Archived from the original on 2010-07-17. Retrieved 2009-10-06.
- "ISO/IEC FCD 14496-3 Subpart 1 - Draft - N2203" (PDF). ISO/IEC JTC 1/SC 29/WG 11. 15 May 1998. Retrieved 2009-10-07.
- Brandenburg, Karlheinz; Kunz, Oliver; Sugiyama, Akihiko (15 May 1998). "MPEG-4 Natural Audio Coding - Audio profiles and levels". chiariglione.org. Archived from the original on 2010-07-17. Retrieved 2009-10-07.
- Brandenburg, Karlheinz; Kunz, Oliver; Sugiyama, Akihiko (1999). "MPEG-4 Natural Audio Coding - General Audio Coding (AAC based)". chiariglione.org. Archived from the original on 2010-02-19. Retrieved 2009-10-06.
- "ISO/IEC 14496-3:1999/Amd 1:2000 - Audio extensions". ISO. 2000. Archived from the original on 2011-06-06. Retrieved 2009-10-07.
- "ISO/IEC 14496-3:/Amd.1 - Final Committee Draft - MPEG-4 Audio Version 2" (PDF). ISO/IEC JTC 1/SC 29/WG 11. July 1999. Archived from the original (PDF) on 2012-08-01. Retrieved 2009-10-07.
- Purnhagen, Heiko (19 February 2000). "AES 108th Convention: MPEG-4 Version 2 Audio What is it about?". Retrieved 2009-10-07.[dead link]
- Pereira, Fernando (October 2001). "Levels for Audio Profiles". MPEG Industry Forum. Archived from the original on 2010-01-08. Retrieved 2009-10-15.
- "ISO/IEC 14496-3:2001/Amd 1:2003 - Bandwidth extension". ISO. 2003. Archived from the original on 2011-06-06. Retrieved 2009-10-07.
- "Text of ISO/IEC 14496-3:2001/FPDAM 4, Audio Lossless Coding (ALS), new audio profiles and BSAC extensions". ISO/IEC JTC1/SC29/WG11/N7016. 11 January 2005. Archived from the original (DOC) on 12 May 2014. Retrieved 2009-10-09.
- "Audio Lossless Coding (ALS), new audio profiles and BSAC extensions, ISO/IEC 14496-3:2005/Amd 2:2006". ISO. 2006. Archived from the original on 2012-01-04. Retrieved 2009-10-13.
- Mody, Mihir (6 June 2005). "Audio compression gets better and more complex". Embedded.com. Archived from the original on 8 February 2016. Retrieved 2009-10-13.
- "Archived copy" (PDF). Archived from the original (PDF) on 2006-10-26. Retrieved 2007-01-29.CS1 maint: archived copy as title (link)
- "Parametric coding for high-quality audio, ISO/IEC 14496-3:2001/Amd 2:2004". ISO. 2004. Archived from the original on 2012-01-04. Retrieved 2009-10-13.
- "3GPP TS 26.401 V6.0.0 (2004-09), General Audio Codec audio processing functions; Enhanced aacPlus General Audio Codec; General Description (Release 6)" (DOC). 3GPP. 30 September 2004. Archived from the original on 19 August 2006. Retrieved 2009-10-13.
- "ISO/IEC 14496-3:2009 - Information technology -- Coding of audio-visual objects -- Part 3: Audio". ISO. 2009. Archived from the original on 2011-06-06. Retrieved 2009-10-07.
- "AAC". Hydrogenaudio. Archived from the original on 2014-07-06. Retrieved 2011-01-24.
- US patent application 20070297624 Digital audio encoding
- "ISO/IEC 13818-7, Third edition, Part 7 - Advanced Audio Coding (AAC)" (PDF). ISO. 15 October 2004. p. 32. Archived from the original (PDF) on 13 July 2011. Retrieved 2009-10-19.
- Grill, Bernhard; Geyersberger, Stefan; Hilpert, Johannes; Teichmann, Bodo (July 2004). "Implementation of MPEG-4 Audio Components on various Platforms" (PDF). Fraunhofer Gesellschaft. Archived from the original (PDF) on 2007-06-10. Retrieved 2009-10-09. Cite journal requires
- "ISO/IEC 14496-3:2009/Amd 3:2012 - Transport of unified speech and audio coding (USAC)". ISO. Archived from the original on 2016-03-08. Retrieved 2016-08-03.
- "ISO/IEC 14496-3:2009 - Information technology -- Coding of audio-visual objects -- Part 3: Audio". ISO. Archived from the original on 2016-05-20. Retrieved 2016-08-02.
- "ISO/IEC 14496-3:2009/Amd 3:2012 - Transport of unified speech and audio coding (USAC)". ISO. Archived from the original on 2016-08-19. Retrieved 2016-08-02.
- "The AAC-ELD Family for High Quality Communication Services | MPEG". mpeg.chiariglione.org. Archived from the original on 2016-08-20. Retrieved 2016-08-02.
- IMS Profile for High Definition Video Conference (HDVC) Service (PDF). GSMA. 24 May 2016. p. 10. Archived (PDF) from the original on 18 August 2016.
- "AAC Licensing FAQ Q5". Via Licensing. Retrieved 2020-01-15.
- "AAC License Fees". Via Licensing. Retrieved 2020-01-15.
- Thom, D.; Purnhagen, H. (October 1998). "MPEG Audio FAQ Version 9 - MPEG-4". chiariglione.org. MPEG Audio Subgroup. Archived from the original on 2010-02-14. Retrieved 2009-10-06.
- Wolters, Martin; Kjorling, Kristofer; Homm, Daniel; Purnhagen, Heiko. "A closer look into MPEG-4 High Efficiency AAC" (PDF): 3. Archived from the original (PDF) on 2003-12-19. Retrieved 2008-07-31. Cite journal requires
|journal=(help) Presented at the 115th Convention of the Audio Engineering Society, 10–13 October 2003.
- "Advanced Audio Coding (MPEG-2), Audio Data Interchange Format". Library of Congress / National Digital Information Infrastructure and Preservation Program. 7 March 2007. Archived from the original on 30 July 2008. Retrieved 2008-07-31.
- ETSI TS 101 154 v1.5.1: Specification for the use of Video and Audio Coding in Broadcasting Applications based on the MPEG transport stream
- Cohen, Peter (2010-05-27). "iTunes Store goes DRM-free". Macworld. Mac Publishing. Archived from the original on 18 February 2009. Retrieved 2009-02-10.
- "Gingerbread - Android Developers". Android Developers. Archived from the original on 29 December 2017. Retrieved 8 May 2018.
- "Supported media formats - Android Developers". Android Developers. Archived from the original on 11 March 2012. Retrieved 8 May 2018.
- http://www.palm.com/us/products/phones/pre/#techspecs Archived 2011-05-24 at the Wayback Machine
- "Nintendo - Customer Service - Wii - Photo Channel". nintendo.com. Archived from the original on 5 May 2017. Retrieved 8 May 2018.
- "Archived copy". Archived from the original on 2015-09-23. Retrieved 2015-09-22.CS1 maint: archived copy as title (link) | Supported Media for Google Cast
- "Statistics - Adobe Flash runtimes". www.adobe.com. Archived from the original on 2 October 2011. Retrieved 8 May 2018.
- "Archived copy". Archived from the original on 2014-08-21. Retrieved 2014-08-20.CS1 maint: archived copy as title (link)
- Xbox.com | System Use - Use an Apple iPod with Xbox 360 Archived April 8, 2007, at the Wayback Machine
- "Nero Platinum 2018 Suite - Award-winning all-rounder". Nero AG. Archived from the original on 14 December 2012. Retrieved 8 May 2018.
- "FAAC". AudioCoding.com. Archived from the original on 2009-12-11. Retrieved 2009-11-03.
- "FAAD2". AudioCoding.com. Archived from the original on 2009-12-11. Retrieved 2009-11-03.
- "December 5th, 2015, The native FFmpeg AAC encoder is now stable!". ffmpeg.org. Archived from the original on 16 July 2016. Retrieved 26 June 2016.
- "FFmpeg AAC Encoding Guide". Archived from the original on 17 April 2016. Retrieved 11 April 2016.
Which encoder provides the best quality? ... the likely answer is: libfdk_aac
- "Libav Wiki - Encoding AAC". Archived from the original on 2016-04-20. Retrieved 11 April 2016.
- Fraunhofer audio codecs
- AudioCoding.com – home of FAAC and FAAD2
- Official MPEG web site
- AAC improvements and extensions (2004)
- RFC 3016 - RTP Payload Format for MPEG-4 Audio/Visual Streams
- RFC 3640 - RTP Payload Format for Transport of MPEG-4 Elementary Streams
- RFC 4281 - The Codecs Parameter for "Bucket" Media Types
- RFC 4337 - MIME Type Registration for MPEG-4