Akashi Kaikyō Bridge

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
Akashi Kaikyō Bridge

Akashi Bridge.JPG
Akashi Kaikyō Bridge from the air, December 2005
Coordinates34°36′58″N 135°01′14″E / 34.6162°N 135.0205°E / 34.6162; 135.0205Coordinates: 34°36′58″N 135°01′14″E / 34.6162°N 135.0205°E / 34.6162; 135.0205
CarriesSix lanes of the E28 Kobe-Awaji-Naruto Expressway and four emergency lanes
CrossesAkashi Strait[1]
LocaleAwaji Island and Kobe[1]
Other name(s)Pearl Bridge[2]
Maintained byHonshu-Shikoku Bridge Expressway Company Limited
(JB Honshi Kōsoku)
DesignSuspension bridge[1]
Total length3,911 metres (12,831 ft; 2.430 mi)
Height282.8 metres (928 ft) (pylons)[1]
Longest span1,991 metres (6,532 ft; 1.237 mi)[1]
Clearance below65.72 metres (215.6 ft)
DesignerSatoshi Kashima
Construction start1988[1]
Construction end1998[1]
OpenedApril 5, 1998

The Akashi Kaikyō Bridge (明石海峡大橋, Akashi Kaikyō Ōhashi) is a suspension bridge, which links the city of Kobe on the Japanese mainland of Honshu to Iwaya on Awaji Island. It crosses the busy Akashi Strait (Akashi Kaikyō in Japanese) as part of the Honshu–Shikoku Highway. It was completed in 1998,[1] and has the longest central span of any suspension bridge in the world,[3] at 1,991 metres (6,532 ft; 1.237 mi). It is one of the key links of the Honshū–Shikoku Bridge Project, which created three routes across the Inland Sea.


Before the Akashi Kaikyō Bridge was built, ferries carried passengers across the Akashi Strait in Japan. This dangerous waterway often experiences severe storms, and in 1955 two ferries sank in the strait during a storm, killing 168 people. The ensuing shock and public outrage convinced the Japanese government to develop plans for a bridge to cross the strait. The original plan called for a mixed railway-road bridge, but when construction on the bridge began in April 1988, the construction was restricted to road only, with six lanes. Actual construction did not begin until May 1988 and involved more than 100 contractors.[4] The bridge was opened for traffic on April 5, 1998 in a ceremony officiated by the Crown Prince Naruhito and his spouse Crown Princess Masako of Japan along with Construction Minister Tsutomu Kawara.[4]


Main supporting towers
Video of the bridge, as seen from a ship passing underneath

The bridge has three spans. The central span is 1,991 m (6,532 ft; 1.237 mi),[1] and the two other sections are each 960 m (3,150 ft; 0.60 mi). The bridge is 3,911 m (12,831 ft; 2.430 mi) long overall. The two towers were originally 1,990 m (6,530 ft; 1.24 mi) apart, but the Great Hanshin earthquake on January 17, 1995, moved the towers so much (only the towers had been erected at the time) that the span had to be increased by 1 m (3.3 ft).[1]

The bridge was designed with a dual-hinged stiffening girder system, allowing the structure to withstand winds of 286 kilometres per hour (178 mph), earthquakes measuring up to magnitude 8.5, and harsh sea currents. The bridge also contains tuned mass dampers that are designed to operate at the resonance frequency of the bridge to dampen forces. The two main supporting towers rise 282.8 m (928 ft) above sea level, and the bridge can expand because of heat by up to 2 m (6.6 ft) over the course of a day. Each anchorage required 350,000 tonnes (340,000 long tons; 390,000 short tons) of concrete. The steel cables have 300,000 kilometres (190,000 mi) of wire: each cable is 112 centimetres (44 in) in diameter and contains 36,830 strands of wire.[5][self-published source][6][self-published source]

The Akashi–Kaikyo bridge has a total of 1,737 illumination lights: 1,084 for the main cables, 116 for the main towers, 405 for the girders and 132 for the anchorages. Sets of three high-intensity discharge lamps in the colors red, green and blue are mounted on the main cables. The RGB color model and computer technology make for a variety of combinations. Twenty-eight patterns are used for occasions such as national or regional holidays, memorial days or festivities.[7]

The towers are located in an area of strong tidal currents where water velocity exceeds 7 knots (about 3.6 m/s). The selected scour protection measure includes the installation of a filtering layer with a thickness of 2 m in a range of 10 m around the caisson, covered with rip raps of 8 m thick.[8][self-published source]


The total cost is estimated at ¥500 billion or US$3.6 billion (per 1998 exchange rates).[4] It is expected to be repaid by charging drivers a toll to cross the bridge. The toll is 2,300 yen and the bridge is used by approximately 23,000 cars per day.[2]

Comparison of the side elevations of the Akashi Kaikyō Bridge and some notable bridges at the same scale. (click for interactive version)

See also[edit]


  1. ^ a b c d e f g h i j Akashi Kaikyo Bridge at Structurae
  2. ^ a b "Akashi Kaikyo Bridge, Akashi Strait, Japan". Road Traffic Technology. Retrieved 23 September 2016.
  3. ^ Akashi-Kaikyo Bridge – HSBE
  4. ^ a b c Cooper, James D. "World's Longest Suspension Bridge Opens in Japan". United States Department of Transportation – Federal Highway Administration. Retrieved 14 February 2012.
  5. ^ Akashi Kaikyo Bridge at everything2[self-published source]
  6. ^ Friedl, Jeffrey (December 9, 2008). "Heavy Lifting: Supporting the Longest Suspension Bridge in the World". Jeffrey Friedl's Blog.[self-published source][self-published source]
  7. ^ "Akashi Kaikyo Bridge, Akashi Strait, Japan". Retrieved 2015-04-26.
  8. ^ "Scour protection at Akashi Kaikyo bridge". Archived from the original on 2019-05-07. Retrieved 2019-05-05.[self-published source]

External links[edit]