In chemistry, an alcohol is an organic compound in which the hydroxyl functional group (-OH) is bound to a carbon atom. In particular, this carbon center should be saturated, having single bonds to three other atoms.
An important class of alcohols are the simple acyclic alcohols, the general formula for which is CnH2n+1OH. Of these ethanol (C2H5OH) is the alcohol found in alcoholic beverages; in common speech the word alcohol refers to ethanol.
Other alcohols are usually described with a clarifying adjective, as in isopropyl alcohol (propan-2-ol) or wood alcohol (methyl alcohol, or methanol). The suffix -ol appears in the IUPAC chemical name of all substances where the hydroxyl group is the functional group with the highest priority; in substances where a higher priority group is present the prefix hydroxy- will appear in the IUPAC name. The suffix -ol in non-systematic names (such as paracetamol or cholesterol) also typically indicates that the substance includes a hydroxyl functional group and, so, can be termed an alcohol. But many substances, particularly sugars (examples glucose and sucrose) contain hydroxyl functional groups without using the suffix.
- 1 Toxicity
- 2 Nomenclature
- 3 Physical and chemical properties
- 4 Applications
- 5 Production
- 6 Reactions
- 7 Occurrence in nature
- 8 See also
- 9 Notes
- 10 References
- 11 External links
Alcoholic beverages have been consumed by humans since prehistoric times for a variety of hygienic, dietary, medicinal, religious, and recreational reasons.
Primary alcohols (R-CH2-OH) can be oxidized either to aldehydes (R-CHO) (e.g. acetaldehyde) or to carboxylic acids (R-CO2H), while the oxidation of secondary alcohols (R1R2CH-OH) normally terminates at the ketone (R1R2C=O) stage. Tertiary alcohols (R1R2R3C-OH) are resistant to oxidation.
Ethanol's toxicity is largely caused by its primary metabolite, acetaldehyde (systematically ethanal) and secondary metabolite, acetic acid. All primary alcohols are broken down into aldehydes then to carboxylic acids whose toxicities are similar to acetaldehyde and acetic acid. Metabolite toxicity is reduced in rats fed N-acetylcysteine and thiamine.
Tertiary alcohols cannot be metabolised into aldehydes and as a result they cause no hangover or toxicity through this mechanism.
Some secondary and tertiary alcohols are less poisonous than ethanol because the liver is unable to metabolise them into these toxic by-products. This makes them more suitable for recreational and medicinal use as the chronic harms are lower. tert-Amyl alcohol found in alcoholic beverages are a good example of a tertiary alcohol which saw both medicinal and recreational use.
Other alcohols are substantially more poisonous than ethanol, partly because they take much longer to be metabolized and partly because their metabolism produces substances that are even more toxic. Methanol (wood alcohol), for instance, is oxidized to formaldehyde and then to the poisonous formic acid in the liver by alcohol dehydrogenase and formaldehyde dehydrogenase enzymes, respectively; accumulation of formic acid can lead to blindness or death. Likewise, poisoning due to other alcohols such as ethylene glycol or diethylene glycol are due to their metabolites, which are also produced by alcohol dehydrogenase.
An effective treatment to prevent toxicity after methanol or ethylene glycol ingestion is to administer ethanol. Alcohol dehydrogenase has a higher affinity for ethanol, thus preventing methanol from binding and acting as a substrate. Any remaining methanol will then have time to be excreted through the kidneys.
In the IUPAC system, the name of the alkane chain loses the terminal "e" and adds "ol", e.g., "methanol" and "ethanol". When necessary, the position of the hydroxyl group is indicated by a number between the alkane name and the "ol": propan-1-ol for CH3CH2CH2OH, propan-2-ol for CH3CH(OH)CH3. Sometimes, the position number is written before the IUPAC name: 1-propanol and 2-propanol. If a higher priority group is present (such as an aldehyde, ketone, or carboxylic acid), then it is necessary to use the prefix "hydroxy", for example: 1-hydroxy-2-propanone (CH3COCH2OH).
The IUPAC nomenclature is used in scientific publications and where precise identification of the substance is important. In other less formal contexts, an alcohol is often called with the name of the corresponding alkyl group followed by the word "alcohol", e.g., methyl alcohol, ethyl alcohol. Propyl alcohol may be n-propyl alcohol or isopropyl alcohol, depending on whether the hydroxyl group is bonded to the 1st or 2nd carbon on the propane chain.
Alcohols are classified into 0°, primary (1°), secondary (2°; also italic abbreviated sec- or just s-), and tertiary (3°; also italic abbreviated tert- or just t-), based upon the number of carbon atoms connected to the carbon atom that bears the hydroxyl (OH) functional group. The primary alcohols have general formulas RCH2OH; secondary ones are RR'CHOH; and tertiary ones are RR'R"COH, where R, R', and R" stand for alkyl groups. Methanol (C H3O H or CH4O) is a 0° alcohol. Some sources include methanol as a primary alcohol, including the 1911 edition of the Encyclopædia Britannica, but this interpretation is less common in modern texts.
|Chemical Formula||IUPAC Name||Common Name|
|C3H7OH||Isopropyl alcohol||Rubbing alcohol|
|Unsaturated aliphatic alcohols|
|C10H19OH||2 - (2-propyl)-5-methyl-cyclohexane-1-ol||Menthol|
Alkyl chain variations in alcohols
Short-chain alcohols have alkyl chains of 1-3 carbons. Medium-chain alcohols have alkyl chains of 4-7 carbons. Long-chain alcohols (also known as fatty alcohols) have alkyl chains of 8-21 carbons, and very long-chain alcohols have alkyl chains of 22 carbons or longer.
"Simple alcohols" appears to be a completely undefined term. However, simple alcohols are often referred to by common names derived by adding the word "alcohol" to the name of the appropriate alkyl group. For instance, a chain consisting of one carbon (a methyl group, CH3) with an OH group attached to the carbon is called "methyl alcohol" while a chain of two carbons (an ethyl group, CH2CH3) with an OH group connected to the CH2 is called "ethyl alcohol." For more complex alcohols, the IUPAC nomenclature must be used.
Simple alcohols, in particular ethanol and methanol, possess denaturing and inert rendering properties, leading to their use as anti-microbial agents in medicine, pharmacy, and industry.
Encyclopædia Britannica states, "The higher alcohols - those containing 4 to 10 carbon atoms – are somewhat viscous, or oily, and they have heavier fruity odours. Some of the highly branched alcohols and many alcohols containing more than 12 carbon atoms are solids at room temperature."
Like ethanol, butanol can be produced by fermentation processes. (However, the fermenting agent is a bacterium, Clostridium acetobutylicum, that feeds on cellulose, not sugars like the Saccharomyces yeast that produces ethanol.) Saccharomyces yeast are known to produce these higher alcohols at temperatures above 75 °F (24 °C).
History and etymology
The word alcohol appears in English as a term for a very fine powder in the 16th century. It was borrowed from French, which took it from medical Latin.
Ultimately the word is from the Arabic كحل (al-kuḥl, "kohl, a powder used as an eyeliner"). Al- is the Arabic definitive article, equivalent to the in English; alcohol was originally used for the very fine powder produced by the sublimation of the natural mineral stibnite to form antimony sulfide Sb2S3 (hence the essence or "spirit" of the substance), which was used as an antiseptic, eyeliner, and cosmetic (see kohl (cosmetics)). Bartholomew Traheron, in his 1543 translation of John of Vigo, introduces the word as a term used by "barbarous" (Moorish) authors for "fine powder." Vigo wrote: the barbarous auctours use alcohol, or (as I fynde it sometymes wryten) alcofoll, for moost fine poudre.
The 1657 Lexicon Chymicum by William Johnson glosses the word as antimonium sive stibium. By extension, the word came to refer to any fluid obtained by distillation, including "alcohol of wine," the distilled essence of wine. Libavius in Alchymia (1594) refers to vini alcohol vel vinum alcalisatum. Johnson (1657) glosses alcohol vini as quando omnis superfluitas vini a vino separatur, ita ut accensum ardeat donec totum consumatur, nihilque fæcum aut phlegmatis in fundo remaneat. The word's meaning became restricted to "spirit of wine" (the chemical known today as ethanol) in the 18th century and was extended to the class of substances so-called as "alcohols" in modern chemistry after 1850.
The first alcohol (today known as ethyl alcohol) was discovered by the tenth-century Persian alchemist al-Razi. The current Arabic name for alcohol (ethanol) is الغول al-ġawl – properly meaning "spirit" or "demon" – with the sense "the thing that gives the wine its headiness" (in the Qur'an sura 37 verse 47). The term ethanol was invented 1838, modeled on the German word äthyl (Liebig), which is in turn based on Greek aither ether and hyle "stuff."
Physical and chemical properties
Alcohols have an odor that is often described as “biting” and as “hanging” in the nasal passages. Ethanol has a slightly sweeter (or more fruit-like) odor than the other alcohols.
In general, the hydroxyl group makes the alcohol molecule polar. Those groups can form hydrogen bonds to one another and to other compounds (except in certain large molecules where the hydroxyl is protected by steric hindrance of adjacent groups). This hydrogen bonding means that alcohols can be used as protic solvents. Two opposing solubility trends in alcohols are: the tendency of the polar OH to promote solubility in water, and the tendency of the carbon chain to resist it. Thus, methanol, ethanol, and propanol are miscible in water because the hydroxyl group wins out over the short carbon chain. Butanol, with a four-carbon chain, is moderately soluble because of a balance between the two trends. Alcohols of five or more carbons (pentanol and higher) are effectively insoluble in water because of the hydrocarbon chain's dominance. All simple alcohols are miscible in organic solvents.
Because of hydrogen bonding, alcohols tend to have higher boiling points than comparable hydrocarbons and ethers. The boiling point of the alcohol ethanol is 78.29 °C, compared to 69 °C for the hydrocarbon hexane (a common constituent of gasoline), and 34.6 °C for diethyl ether.
Alcohols, like water, can show either acidic or basic properties at the -OH group. With a pKa of around 16-19, they are, in general, slightly weaker acids than water, but they are still able to react with strong bases such as sodium hydride or reactive metals such as sodium. The salts that result are called alkoxides, with the general formula RO- M+.
Alcohols can also undergo oxidation to give aldehydes, ketones, or carboxylic acids, or they can be dehydrated to alkenes. They can react to form ester compounds, and they can (if activated first) undergo nucleophilic substitution reactions. The lone pairs of electrons on the oxygen of the hydroxyl group also makes alcohols nucleophiles. For more details, see the reactions of alcohols section below.
As one moves from primary to secondary to tertiary alcohols with the same backbone, the hydrogen bond strength, the boiling point, and the acidity typically decrease.
Alcohol has a long history of several uses worldwide. It is found in beverages for adults, as fuel, and also has many scientific, medical, and industrial uses. The term alcohol-free is often used to describe a product that does not contain alcohol. Some consumers of some commercially prepared products may view alcohol as an undesirable ingredient, particularly in products intended for children.
Alcoholic beverages, typically containing 1–50% ethanol by volume, have been produced and consumed by humans since pre-historic times. Other alcohols such as 2-methyl-2-butanol and γ-hydroxybutyric acid are also consumed by humans for their psychoactive effects.
Ethanol can be used as an antiseptic to disinfect the skin before injections are given, often along with iodine. Ethanol-based soaps are becoming common in restaurants and are convenient because they do not require drying due to the volatility of the compound. Alcohol based gels have become common as hand sanitizers.
Some alcohols, mainly ethanol and methanol, can be used as an alcohol fuel. Fuel performance can be increased in forced induction internal combustion engines by injecting alcohol into the air intake after the turbocharger or supercharger has pressurized the air. This cools the pressurized air, providing a denser air charge, which allows for more fuel, and therefore more power.
Hydroxyl groups (-OH), found in alcohols, are polar and therefore hydrophilic (water loving) but their carbon chain portion is non-polar which make them hydrophobic. The molecule increasingly becomes overall more nonpolar and therefore less soluble in the polar water as the carbon chain becomes longer. Methanol has the shortest carbon chain of all alcohols (one carbon atom) followed by ethanol (two carbon atoms.)
Alcohols have applications in industry and science as reagents or solvents. Because of its relatively low toxicity compared with other alcohols and ability to dissolve non-polar substances, ethanol can be used as a solvent in medical drugs, perfumes, and vegetable essences such as vanilla. In organic synthesis, alcohols serve as versatile intermediates.
Ziegler and Oxo Processes
- Al(C2H5)3 + 9 C2H4 → Al(C8H17)3
- Al(C8H17)3 + 3 O + 3 H2O → 3 HOC8H17 + Al(OH)3
The process generates a range of alcohols that are separated by distillation.
- RCH=CH2 + H2 + CO → RCH2CH2CHO
- RCH2CH2CHO + 3 H2 → RCH2CH2CH2OH
Such processes give fatty alcohols, which are useful for detergents.
Low molecular weight alcohols of industrial importance are produced by the addition of water to alkenes. Ethanol, isopropanol, 2-butanol, and tert-butanol are produced by this general method. Two implementations are employed, the direct and indirect methods. The direct method avoids the formation of stable intermediates, typically using acid catalysts. In the indirect method, the alkene is converted to the sulfate ester, which is subsequently hydrolyzed. The direct hydration using ethylene (ethylene hydration) or other alkenes from cracking of fractions of distilled crude oil.
Ethanol is obtained by fermentation using glucose produced from sugar from the hydrolysis of starch, in the presence of yeast and temperature of less than 37 °C to produce ethanol. For instance, such a process might proceed by the conversion of sucrose by the enzyme invertase into glucose and fructose, then the conversion of glucose by the enzyme zymase into ethanol (and carbon dioxide).
Several of the benign bacteria[which?] in the intestine use fermentation as a form of anaerobic metabolism. This metabolic reaction produces ethanol as a waste product, just like aerobic respiration produces carbon dioxide and water. Thus, human bodies contain some quantity of alcohol endogenously produced by these bacteria. In rare cases, this can be sufficient to cause "auto-brewery syndrome" in which intoxicating quantities of alcohol are produced.
Several methods exist for the preparation of alcohols in the laboratory.
Primary alkyl halides react with aqueous NaOH or KOH mainly to primary alcohols in nucleophilic aliphatic substitution. (Secondary and especially tertiary alkyl halides will give the elimination (alkene) product instead). Grignard reagents react with carbonyl groups to secondary and tertiary alcohols. Related reactions are the Barbier reaction and the Nozaki-Hiyama reaction.
Aldehydes or ketones are reduced with sodium borohydride or lithium aluminium hydride (after an acidic workup). Another reduction by aluminiumisopropylates is the Meerwein-Ponndorf-Verley reduction. Noyori asymmetric hydrogenation is the asymmetric reduction of β-keto-esters.
Alkenes engage in an acid catalysed hydration reaction using concentrated sulfuric acid as a catalyst that gives usually secondary or tertiary alcohols. The hydroboration-oxidation and oxymercuration-reduction of alkenes are more reliable in organic synthesis. Alkenes react with NBS and water in halohydrin formation reaction. Amines can be converted to diazonium salts, which are then hydrolyzed.
The formation of a secondary alcohol via reduction and hydration is shown:
Alcohols can behave as weak acids, undergoing deprotonation. The deprotonation reaction to produce an alkoxide salt is performed either with a strong base such as sodium hydride or n-butyllithium or with sodium or potassium metal.
- 2 R-OH + 2 Na → 2 R-O−Na+ + H2
- 2 CH3CH2-OH + 2 Na → 2 CH3-CH2-O-Na+ + H2↑
- R-OH + NaOH ⇌ R-O-Na+ + H2O (equilibrium to the left)
It should be noted, however, that the bases used to deprotonate alcohols are strong themselves. The bases used and the alkoxides created are both highly moisture-sensitive chemical reagents.
The acidity of alcohols is also affected by the overall stability of the alkoxide ion. Electron-withdrawing groups attached to the carbon containing the hydroxyl group will serve to stabilize the alkoxide when formed, thus resulting in greater acidity. On the other hand, the presence of electron-donating group will result in a less stable alkoxide ion formed. This will result in a scenario whereby the unstable alkoxide ion formed will tend to accept a proton to reform the original alcohol.
The OH group is not a good leaving group in nucleophilic substitution reactions, so neutral alcohols do not react in such reactions. However, if the oxygen is first protonated to give R−OH2+, the leaving group (water) is much more stable, and the nucleophilic substitution can take place. For instance, tertiary alcohols react with hydrochloric acid to produce tertiary alkyl halides, where the hydroxyl group is replaced by a chlorine atom by unimolecular nucleophilic substitution. If primary or secondary alcohols are to be reacted with hydrochloric acid, an activator such as zinc chloride is needed. In alternative fashion, the conversion may be performed directly using thionyl chloride.
- 3 R-OH + PBr3 → 3 RBr + H3PO3
Alcohols are themselves nucleophilic, so R−OH2+ can react with ROH to produce ethers and water in a dehydration reaction, although this reaction is rarely used except in the manufacture of diethyl ether.
More useful is the E1 elimination reaction of alcohols to produce alkenes. The reaction, in general, obeys Zaitsev's Rule, which states that the most stable (usually the most substituted) alkene is formed. Tertiary alcohols eliminate easily at just above room temperature, but primary alcohols require a higher temperature.
This is a diagram of acid catalysed dehydration of ethanol to produce ethene:
- R-OH + R'-COOH → R'-COOR + H2O
In order to drive the equilibrium to the right and produce a good yield of ester, water is usually removed, either by an excess of H2SO4 or by using a Dean-Stark apparatus. Esters may also be prepared by reaction of the alcohol with an acid chloride in the presence of a base such as pyridine.
Primary alcohols (R-CH2-OH) can be oxidized either to aldehydes (R-CHO) or to carboxylic acids (R-CO2H), while the oxidation of secondary alcohols (R1R2CH-OH) normally terminates at the ketone (R1R2C=O) stage. Tertiary alcohols (R1R2R3C-OH) are resistant to oxidation.
The direct oxidation of primary alcohols to carboxylic acids normally proceeds via the corresponding aldehyde, which is transformed via an aldehyde hydrate (R-CH(OH)2) by reaction with water before it can be further oxidized to the carboxylic acid.
Reagents useful for the transformation of primary alcohols to aldehydes are normally also suitable for the oxidation of secondary alcohols to ketones. These include Collins reagent and Dess-Martin periodinane. The direct oxidation of primary alcohols to carboxylic acids can be carried out using potassium permanganate or the Jones reagent.
Occurrence in nature
- "alcohols". IUPAC Gold Book. Retrieved 16 December 2013.
- IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Alcohols".
- Fowkes, Steven (1996-12-13). "Living with alcohol". Smart Drug News 5. Retrieved 2012-03-02.
- Melton, Lisa. "What's your poison". New Scientist. Archived from the original on 2012-02-21. Retrieved 2007-02-10.
- Maxwell, C. R.; Spangenberg, R. J.; Hoek, J. B.; Silberstein, S. D.; Oshinsky, M. L. (2010). "Acetate Causes Alcohol Hangover Headache in Rats". In Skoulakis, Efthimios M. C. PLoS ONE 5 (12): e15963. doi:10.1371/journal.pone.0015963. PMC 3013144. PMID 21209842.
- Ramachandra Murty, B (2004-10-01). "The Biochemistry of Alcohol Toxicity". Archived from the original on 2012-08-20. Retrieved 2012-02-21.
- Cassarett, Lewis; Doull, John (1986). Toxicology: The Basic Science of Poisons (3rd ed.). pp. 648–653.
- Ozaras, R.; Tahan, V.; Aydin, S.; Uzun, H.; Kaya, S.; Senturk, H. (2003). "N-acetylcysteine attenuates alcohol-induced oxidative stress in the rat". World journal of gastroenterology : WJG 9 (1): 125–128. PMID 12508366.
- "Protection against Acetaldehyde Toxicity in the rat byl-cysteine, thiamin andl-2-Methylthiazolidine-4-carboxylic acid". Agents and Actions 4 (2): 125–130. 1974. doi:10.1007/BF01966822. PMID 4842541.
- Collins, A. S.; Sumner, S. C.; Borghoff, S. J.; Medinsky, M. A. (1999). "A physiological model for tert-amyl methyl ether and tert-amyl alcohol: Hypothesis testing of model structures". Toxicological sciences : an official journal of the Society of Toxicology 49 (1): 15–28. doi:10.1093/toxsci/49.1.15. PMID 10367338.
- "Recreational use of 2-methyl-2-butanol". Retrieved 2012-02-21.
- "Least toxic, most concealable alcohol.". Retrieved 2012-02-21.
- Hirsh, H. L.; Orsinger, W. H. (1952). "Methylparafynol--a new type hypnotic. Preliminary report on its therapeutic efficacy and toxicity". American practitioner and digest of treatment 3 (1): 23–26. PMID 14903452.
- Schep LJ, Slaughter RJ, Vale JA, Beasley DM (September 30, 2009). "A seaman with blindness and confusion". BMJ 339: b3929. doi:10.1136/bmj.b3929. PMID 19793790.
- Brent J (May 2009). "Fomepizole for ethylene glycol and methanol poisoning". N. Engl. J. Med. 360 (21): 2216–23. doi:10.1056/NEJMct0806112. ISSN 0028-4793. PMID 19458366.
- Schep LJ, Slaughter RJ, Temple WA, Beasley DM (July 2009). "Diethylene glycol poisoning". Clin Toxicol (Phila) 47 (6): 525–35. doi:10.1080/15563650903086444. ISSN 1556-3650. PMID 19586352.
- ChemIDplus Advanced - Chemical information with searchable synonyms, structures, and formulas
- Wiernikowski, A, Piekoszewski, W, Krzyzanowska-Kierepka, E, Gomułka, E (1997). "Acute oral poisoning with isopropyl alcohol in alcoholics". Przeglad lekarski 54 (6): 459–63. PMID 9333902.
- Mańkowski, W, Klimaszyk, D, Krupiński, B (2000). "How to differentiate acute isopropanol poisoning from ethanol intoxication? – a case report". Przeglad lekarski 57 (10): 588–90. PMID 11199895.
- Zimmerman, HE, Burkhart, KK, Donovan, JW (1999). "Ethylene glycol and methanol poisoning: diagnosis and treatment". Journal of emergency nursing: JEN : official publication of the Emergency Department Nurses Association 25 (2): 116–20. doi:10.1016/S0099-1767(99)70156-X. PMID 10097201.
- Lobert, S (2000). "Ethanol, isopropanol, methanol, and ethylene glycol poisoning". Critical care nurse 20 (6): 41–7. PMID 11878258.
- William Reusch. "Alcohols". VirtualText of Organic Chemistry. Archived from the original on 19 September 2007. Retrieved 2007-09-14.
- Organic chemistry IUPAC nomenclature. Alcohols Rule C-201.
- "an introduction to alcohols". Retrieved 2007-11-22.
- Albert S. Tarendash (2001). Let's review: chemistry, the physical setting. Boston, Mass: Barron's. p. 161. ISBN 0-7641-1664-9.
- "Alcohols – LoveToKnow 1911". Archived from the original on 2006-08-22. Retrieved 2007-11-22.
- "MetaCyc Compound Class: a short-chain alcohol". Retrieved 31 December 2013.
- "Molecule Gallery - Alcohols". Retrieved 31 December 2013.
- "alcohol (chemical compound)". Encyclopædia Britannica. Retrieved 31 December 2013.
- "Alcohol". New World Encyclopedia. Retrieved 31 December 2013.
- "ethyl". Online Etymology Dictionary. Retrieved 31 December 2013.
- Majerza, Irena, Natkaniec, Ireneusz (2006). "Experimental and theoretical IR, R, and INS spectra of 2,2,4,4-tetramethyl-3-t-butyl-pentane-3-ol". Journal of Molecular Structure 788 (1–3): 93–101. Bibcode:2006JMoSt.788...93M. doi:10.1016/j.molstruc.2005.11.022.
- "Global Status Report on Alcohol 2004" (PDF). Retrieved 2010-11-28.
- "Alcohols, Phenols, Thiols, and Ethers". Chemistry - Louisiana Tech University. Retrieved 31 December 2013.
- Jürgen Falbe, Helmut Bahrmann, Wolfgang Lipps, Dieter Mayer "Alcohols, Aliphatic" in Ullmann's Encyclopedia of Chemical Technology Wiley-VCH Verlag; Weinheim, 2002. doi:10.1002/14356007.a01_279
- Lodgsdon J.E. (1994). "Ethanol". In Kroschwitz J.I. Encyclopedia of Chemical Technology 9 (4th ed.). New York: John Wiley & Sons. p. 820. ISBN 0-471-52677-0.
- P. Geertinger MD, J. Bodenhoff, K. Helweg-Larsen, A. Lund (1982-09-01). "Endogenous alcohol production by intestinal fermentation in sudden infant death". Zeitschrift für Rechtsmedizin (Springer-Verlag) 89 (3): 167. doi:10.1007/BF01873798.
- Logan BK, Jones AW (July 2000). "Endogenous ethanol 'auto-brewery syndrome' as a drunk-driving defence challenge". Medicine, science, and the law 40 (3): 206–15. PMID 10976182.
- Cecil Adams (October 20, 2006). "Designated drunk: Can you get intoxicated without actually drinking alcohol?". The Straight Dope. Retrieved 2013-02-27.
- Charnley, S. B.; Kress, M. E., Tielens, A. G. G. M., & Millar, T. J. (1995). "Interstellar Alcohols". Astrophysical Journal 448: 232. Bibcode:1995ApJ...448..232C. doi:10.1086/175955.
|Look up alcohol in Wiktionary, the free dictionary.|
|Wikimedia Commons has media related to Alcohol.|
|Wikiquote has a collection of quotations related to: Alcohol|