Anion-exchange membrane

From Wikipedia, the free encyclopedia
(Redirected from Anion exchange membrane)

An anion exchange membrane (AEM) is a semipermeable membrane generally made from ionomers and designed to conduct anions but reject gases such as oxygen or hydrogen.

Applications[edit]

Anion exchange membranes are used in electrolytic cells and fuel cells to separate reactants present around the two electrodes while transporting the anions essential for the cell operation. An important example is the hydroxide anion exchange membrane used to separate the electrodes of a direct methanol fuel cell (DMFC)[1] or direct-ethanol fuel cell (DEFC).

Poly(fluorenyl-co-aryl piperidinium) (PFAP)-based anion exchange materials (electrolyte membrane and electrode binder) with high ion conductivity and durability under alkaline conditions has been demonstrated for use to extract hydrogen from water. Performance was 7.68 A/cm2 at 2 V, some 6x the performance of existing materials. Its yield is about 1.2 times that of commercial proton-exchange membrane technology (6 A/cm2), and it does not require the use of expensive rare-earth elements. The system works by increasing the specific surface area.[2]

See also[edit]

References[edit]

  1. ^ Danks, Timothy N.; Slade, Robert C. T.; Varcoe, John R. (2002-11-29). "Comparison of PVDF- and FEP-based radiation-grafted alkaline anion-exchange membranes for use in low temperature portable DMFCs". Journal of Materials Chemistry. 12 (12): 3371–3373. doi:10.1039/B208627A. ISSN 1364-5501.
  2. ^ Blain, Loz (2022-01-31). ""Game-changing" anode exchange membrane promises cheaper green hydrogen". New Atlas. Retrieved 2022-02-01.