Water of crystallization
In chemistry, water of crystallization or water of hydration or crystallization water is water that occurs inside crystals. Water is often incorporated in the formation of crystals from aqueous solutions. In some contexts, water of crystallization is the total weight of water in a substance at a given temperature and is mostly present in a definite (stoichiometric) ratio. Classically, "water of crystallization" refers to water that is found in the crystalline framework of a metal complex or a salt, which is not directly bonded to the metal cation.
Upon crystallization from water or moist solvents, many compounds incorporate water molecules in their crystalline frameworks. Water of crystallization can generally be removed by heating a sample but the crystalline properties are often lost. For example, in the case of sodium chloride, the dihydrate is unstable at room temperature.
In molecular formulas water of crystallization can be denoted in different ways:
- "hydrated compound⋅nH2O" or "hydrated compound×nH2O"
- This notation is used when the compound only contains lattice water or when the crystal structure is undetermined. For example Calcium chloride: CaCl2·2H2O
- "hydrated compound(H2O)n"
- A hydrate with coordinated water. For example Zinc chloride: ZnCl2(H2O)4
- Both notations can be combined as for example in copper(II) sulfate: [Cu(H2O)4]SO4·H2O
Position in the crystal structure
A salt with associated water of crystallization is known as a hydrate. The structure of hydrates can be quite elaborate, because of the existence of hydrogen bonds that define polymeric structures.  Historically, the structures of many hydrates were unknown, and the dot in the formula of a hydrate was employed to specify the composition without indicating how the water is bound. Examples:
- CuSO4•5H2O - copper(II) sulfate pentahydrate
- CoCl2•6H2O - cobalt(II) chloride hexahydrate
- SnCl2•2H2O - tin(II) (or stannous) chloride dihydrate
For many salts, the exact bonding of the water is unimportant because the water molecules are labilized upon dissolution. For example, an aqueous solution prepared from CuSO4•5H2O and anhydrous CuSO4 behave identically. Therefore, knowledge of the degree of hydration is important only for determining the equivalent weight: one mole of CuSO4•5H2O weighs more than one mole of CuSO4. In some cases, the degree of hydration can be critical to the resulting chemical properties. For example, anhydrous RhCl3 is not soluble in water and is relatively useless in organometallic chemistry whereas RhCl3•3H2O is versatile. Similarly, hydrated AlCl3 is a poor Lewis acid and thus inactive as a catalyst for Friedel-Crafts reactions. Samples of AlCl3 must therefore be protected from atmospheric moisture to preclude the formation of hydrates.
Crystals of hydrated copper(II) sulfate consist of [Cu(H2O)4]2+ centers linked to SO42− ions. Copper is surrounded by six oxygen atoms, provided by two different sulfate groups and four molecules of water. A fifth water resides elsewhere in the framework but does not bind directly to copper. The cobalt chloride mentioned above occurs as [Co(H2O)6]2+ and Cl−. In tin chloride, each Sn(II) center is pyramidal (mean O/Cl-Sn-O/Cl angle is 83°) being bound to two chloride ions and one water. The second water in the formula unit is hydrogen-bonded to the chloride and to the coordinated water molecule. Water of crystallization is stabilized by electrostatic attractions, consequently hydrates are common for salts that contain +2 and +3 cations as well as −2 anions. In some cases, the majority of the weight of a compound arises from water. Glauber's salt, Na2SO4(H2O)10, is a white crystalline solid with greater than 50% water by weight.
Consider the case of nickel(II) chloride hexahydrate. This species has the formula NiCl2(H2O)6. Crystallographic analysis reveals that the solid consists of [trans-NiCl2(H2O)4] subunits that are hydrogen bonded to each other as well as two additional molecules of H2O. Thus 1/3 of the water molecules in the crystal are not directly bonded to Ni2+, and these might be termed "water of crystallization".
The water content of most compounds can be determined with a knowledge of its formula. An unknown sample can be determined through thermogravimetric analysis (TGA) where the sample is heated strongly, and the accurate weight of a sample is plotted against the temperature. The amount of water driven off is then divided by the molar mass of water to obtain the number of molecules of water bound to the salt.
Other solvents of crystallization
Water is particularly common solvent to be found in crystals because it is small and polar. But all solvents can be found in some host crystals. Water is noteworthy because it is reactive, whereas other solvents such as benzene are considered to be chemically innocuous. Occasionally more than one solvent is found in a crystal, and often the stoichiometry is variable, reflected in the crystallographic concept of "partial occupancy." It is common and conventional for a chemist to "dry" a sample with a combination of vacuum and heat "to constant weight."
For other solvents of crystallization, analysis is conveniently accomplished by dissolving the sample in a deuterated solvent and analyzing the sample for solvent signals by NMR spectroscopy. Single crystal X-ray crystallography is often able to detect the presence of these solvents of crystallization as well. Other methods may be currently available.
Table of crystallization water in some inorganic halides
hydrated metal halides
sphere of the metal
|Equivalents of water of crystallization
that are not bound to M
|CaCl2(H2O)6||[Ca(μ-H2O)6(H2O)3]2+||none||Case of water as a bridging ligand|
|VBr3(H2O)6||trans-[VBr2(H2O)4]+||two||bromides and chlorides are usually similar|
|VI3(H2O)6||[V(H2O)6]3+||none||iodide competes poorly with water|
|CrCl3(H2O)6||trans-[CrCl2(H2O)4]+||two||dark green isomer, aka "Bjerrums's salt"|
|CrCl2(H2O)4||trans-[CrCl2(H2O)4]||none||square planar/tetragonal distortion|
|AlCl3(H2O)6||[Al(H2O)6]3+||none||isostructural with the Cr(III) compound|
|MnCl2(H2O)4||cis-[MnCl2(H2O)4]||none||cis molecular, the unstable trans isomer has also been detected|
|MnCl2(H2O)2||trans-[MnCl4(H2O)2]||none||polymeric with bridging chloride|
|MnBr2(H2O)2||trans-[MnBr4(H2O)2]||none||polymeric with bridging bromide|
|FeCl2(H2O)2||trans-[FeCl4(H2O)2]||none||polymeric with bridging chloride|
|FeCl3(H2O)6||trans-[FeCl2(H2O)4]||two||only hydrate of ferric chloride, isostructural with Cr analogue|
|CoI2(H2O)6||[Co(H2O)6]2+||none||iodide competes poorly with water|
|CoCl2(H2O)4||cis-[CoCl2(H2O)4]||none||note: cis molecular|
|CoCl2(H2O)2||trans-[CoCl4(H2O)2]||none||polymeric with bridging chloride|
|CoBr2(H2O)2||trans-[CoBr4(H2O)2]||none||polymeric with bridging bromide|
|NiCl2(H2O)4||cis-[NiCl2(H2O)4]||none||note: cis molecular|
|NiI2(H2O)6||[Ni(H2O)6]2+||none||iodide competes poorly with water|
|NiCl2(H2O)2||trans-[NiCl4(H2O)2]||none||polymeric with bridging chloride|
two long Cu-Cl distances
two long Cu-Br distances
Hydrates of transition metal sulfates
Transition metal sulfates form mono-, tetra-, and pentahydrates, each of which crystallizes in only one form. The water in these salts typically is coordinated, together with sulfate to the metal center. The sulfates of these same metals also crystallize as both tetragonal and monoclinic hexahydrates, wherein all water is coordinated and the sulfate is a counterion. The heptahydrates, which are often the most common salts, crystallize as monoclinic and the less common orthorhombic forms. In the heptahydrates, one water is in the lattice and the other six are coordinated to the ferrous center. Cr2(SO4)3.18H2O
hydrated metal sulfate
sphere of the metal
|Equivalents of water of crystallization
that are not bound to M
|Cr2(SO4)3(H2O)18||[Cr(H2O)6]6+||six||one of several chromium(III) sulfates|
|MnSO4(H2O)||unknown||unknown||one of several manganese(II) sulfates|
|FeSO4(H2O)7||[Fe(H2O)6]2+||one||Common motif for divalent metal sulfates|
|CoSO4(H2O)7||[Co(H2O)6]2+||one||Common motif for divalent metal sulfates|
|NiSO4(H2O)7||[Ni(H2O)6]2+||one||Common motif for divalent metal sulfates|
|NiSO4(H2O)6||[Ni(H2O)6]2+||none||one of several nickel sulfate hydrates|
|CuSO4(H2O)5||[Cu(H2O)4(SO4)]||one||sulfate is bridging ligand|
|CdSO4(H2O)||Cd(H2O)SO4||none||bridging water ligand|
Hydrated copper(II) sulfate is bright blue.
- Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 0-08-037941-9.
- Klewe, B.; Pedersen, B. (1974). "The crystal structure of sodium chloride dihydrate". Acta Crystallogr. B30: 2363–2371. doi:10.1107/S0567740874007138.
- Yonghui Wang et al. "Novel Hydrogen-Bonded Three-Dimensional Networks Encapsulating One-Dimensional Covalent Chains: ..." Inorg. Chem., 2002, 41 (24), pp. 6351–6357. doi:10.1021/ic025915o
- Carmen R. Maldonadoa, Miguel Quirós and J.M. Salas: "Formation of 2D water morphologies in the lattice of the salt..." Inorganic Chemistry Communications Volume 13, Issue 3, March 2010, p. 399–403; doi:10.1016/j.inoche.2009.12.033
- Moeller, Therald (Jan 1, 1980). Chemistry: With Inorganic qualitative Analysis. Academic Press Inc (London) Ltd. p. 909. ISBN 0-12-503350-8. Retrieved 15 June 2014.
- K. Waizumi, H. Masuda, H. Ohtaki, "X-ray structural studies of FeBr24H2O, CoBr24H2O, NiCl2 4H2O, and CuBr24H2O. cis/trans Selectivity in transition metal(I1) dihalide Tetrahydrate" Inorganica Chimica Acta, 1992 volume 192, pages 173–181.
- B. Morosin "An X-ray diffraction study on nickel(II) chloride dihydrate" Acta Crystallogr. 1967. volume 23, pp. 630-634. doi:10.1107/S0365110X67003305
- Agron, P.A.; Busing, W.R. "Calcium and strontium dichloride hexahydrates by neutron diffraction" Acta Crystallographica Section C 1986, volume 42, pp. 141-p1.
- violet isomer. isostructural with aluminium compound.Andress, K.R.; Carpenter, C. "Kristallhydrate. II.Die Struktur von Chromchlorid- und Aluminiumchloridhexahydrat" Zeitschrift für Kristallographie, Kristallgeometrie, Kristallphysik, Kristallchemie 1934, volume 87, p446-p463.
- Zalkin, Allan; Forrester, J. D.; Templeton, David H. (1964). "Crystal structure of manganese dichloride tetrahydrate". Inorganic Chemistry. 3: 529–33. doi:10.1021/ic50014a017.
- "Structure Cristalline et Expansion Thermique de L’Iodure de Nickel Hexahydrate" (Crystal structure and thermal expansion of nickel(II) iodide hexahydrate) Louër, Michele; Grandjean, Daniel; Weigel, Dominique Journal of Solid State Chemistry (1973), 7(2), 222-8. doi: 10.1016/0022-4596(73)90157-6
- Baur, W.H. "On the crystal chemistry of salt hydrates. III. The determination of the crystal structure of FeSO4(H2O)7 (melanterite)" Acta Crystallographica 1964, volume 17, p1167-p1174. doi:10.1107/S0365110X64003000
- Stadnicka, K.; Glazer, A.M.; Koralewski, M. "Structure, absolute configuration and optical activity of alpha-nickel sulfate hexahydrate" Acta Crystallographica, Section B: Structural Science (1987) 43, p319-p325.
- V. P. Ting, P. F. Henry, M. Schmidtmann, C. C. Wilson, M. T. Weller "In situ neutron powder diffraction and structure determination in controlled humidities" Chem. Commun., 2009, 7527-7529. doi:10.1039/B918702B
- Theppitak, Chatphorn; Chainok, Kittipong "Crystal structure of CdSO4(H2O): A Redetermination" Acta Crystallographica, Section E. Structure Reports Online 2015, volume 71, pi8-pi9. doi:10.1107/S2056989015016904