Jump to content

Gauss–Markov theorem

From Wikipedia, the free encyclopedia
(Redirected from BLUE)

In statistics, the Gauss–Markov theorem (or simply Gauss theorem for some authors)[1] states that the ordinary least squares (OLS) estimator has the lowest sampling variance within the class of linear unbiased estimators, if the errors in the linear regression model are uncorrelated, have equal variances and expectation value of zero.[2] The errors do not need to be normal for the theorem to apply, nor do they need to be independent and identically distributed (only uncorrelated with mean zero and homoscedastic with finite variance).

The requirement for unbiasedness cannot be dropped, since biased estimators exist with lower variance and mean squared error. For example, the James–Stein estimator (which also drops linearity) and ridge regression typically outperform ordinary least squares. In fact, ordinary least squares is rarely even an admissible estimator, as Stein's phenomenon shows--when estimating more than two unknown variables, ordinary least squares will always perform worse (in mean squared error) than Stein's estimator.

Moreover, the Gauss-Markov theorem does not apply when considering more principled loss functions, such as the assigned likelihood or Kullback–Leibler divergence, except in the limited case of normally-distributed errors.

As a result of these discoveries, statisticians typically motivate ordinary least squares by the principle of maximum likelihood instead, or by considering it as a kind of approximate Bayesian inference.

The theorem is named after Carl Friedrich Gauss and Andrey Markov. Gauss provided the original proof,[3] which was later substantially generalized by Markov.[4]

Scalar Case Statement


Suppose we are given two random variable vectors, .

Suppose want to find the best linear estimator of Y given X, such that

would be the estimator,

and parameters such that it would be the best linear estimator of X.

Such an estimator would have the same linear properties of Y, .

Therefore, if the vector X has properties of , the best linear estimator would be

since it has the same mean and variance as Y.



Suppose we have, in matrix notation, the linear relationship

expanding to,

where are non-random but unobservable parameters, are non-random and observable (called the "explanatory variables"), are random, and so are random. The random variables are called the "disturbance", "noise" or simply "error" (will be contrasted with "residual" later in the article; see errors and residuals in statistics). Note that to include a constant in the model above, one can choose to introduce the constant as a variable with a newly introduced last column of X being unity i.e., for all . Note that though as sample responses, are observable, the following statements and arguments including assumptions, proofs and the others assume under the only condition of knowing but not

The Gauss–Markov assumptions concern the set of error random variables, :

  • They have mean zero:
  • They are homoscedastic, that is all have the same finite variance: for all and
  • Distinct error terms are uncorrelated:

A linear estimator of is a linear combination

in which the coefficients are not allowed to depend on the underlying coefficients , since those are not observable, but are allowed to depend on the values , since these data are observable. (The dependence of the coefficients on each is typically nonlinear; the estimator is linear in each and hence in each random which is why this is "linear" regression.) The estimator is said to be unbiased if and only if

regardless of the values of . Now, let be some linear combination of the coefficients. Then the mean squared error of the corresponding estimation is

in other words, it is the expectation of the square of the weighted sum (across parameters) of the differences between the estimators and the corresponding parameters to be estimated. (Since we are considering the case in which all the parameter estimates are unbiased, this mean squared error is the same as the variance of the linear combination.) The best linear unbiased estimator (BLUE) of the vector of parameters is one with the smallest mean squared error for every vector of linear combination parameters. This is equivalent to the condition that

is a positive semi-definite matrix for every other linear unbiased estimator .

The ordinary least squares estimator (OLS) is the function

of and (where denotes the transpose of ) that minimizes the sum of squares of residuals (misprediction amounts):

The theorem now states that the OLS estimator is a best linear unbiased estimator (BLUE).

The main idea of the proof is that the least-squares estimator is uncorrelated with every linear unbiased estimator of zero, i.e., with every linear combination whose coefficients do not depend upon the unobservable but whose expected value is always zero.



Proof that the OLS indeed minimizes the sum of squares of residuals may proceed as follows with a calculation of the Hessian matrix and showing that it is positive definite.

The MSE function we want to minimize is for a multiple regression model with p variables. The first derivative is where is the design matrix

The Hessian matrix of second derivatives is

Assuming the columns of are linearly independent so that is invertible, let , then

Now let be an eigenvector of .

In terms of vector multiplication, this means where is the eigenvalue corresponding to . Moreover,

Finally, as eigenvector was arbitrary, it means all eigenvalues of are positive, therefore is positive definite. Thus, is indeed a global minimum.

Or, just see that for all vectors . So the Hessian is positive definite if full rank.



Let be another linear estimator of with where is a non-zero matrix. As we're restricting to unbiased estimators, minimum mean squared error implies minimum variance. The goal is therefore to show that such an estimator has a variance no smaller than that of the OLS estimator. We calculate:

Therefore, since is unobservable, is unbiased if and only if . Then:

Since is a positive semidefinite matrix, exceeds by a positive semidefinite matrix.

Remarks on the proof


As it has been stated before, the condition of is a positive semidefinite matrix is equivalent to the property that the best linear unbiased estimator of is (best in the sense that it has minimum variance). To see this, let another linear unbiased estimator of .

Moreover, equality holds if and only if . We calculate

This proves that the equality holds if and only if which gives the uniqueness of the OLS estimator as a BLUE.

Generalized least squares estimator


The generalized least squares (GLS), developed by Aitken,[5] extends the Gauss–Markov theorem to the case where the error vector has a non-scalar covariance matrix.[6] The Aitken estimator is also a BLUE.

Gauss–Markov theorem as stated in econometrics


In most treatments of OLS, the regressors (parameters of interest) in the design matrix are assumed to be fixed in repeated samples. This assumption is considered inappropriate for a predominantly nonexperimental science like econometrics.[7] Instead, the assumptions of the Gauss–Markov theorem are stated conditional on .



The dependent variable is assumed to be a linear function of the variables specified in the model. The specification must be linear in its parameters. This does not mean that there must be a linear relationship between the independent and dependent variables. The independent variables can take non-linear forms as long as the parameters are linear. The equation qualifies as linear while can be transformed to be linear by replacing by another parameter, say . An equation with a parameter dependent on an independent variable does not qualify as linear, for example , where is a function of .

Data transformations are often used to convert an equation into a linear form. For example, the Cobb–Douglas function—often used in economics—is nonlinear:

But it can be expressed in linear form by taking the natural logarithm of both sides:[8]

This assumption also covers specification issues: assuming that the proper functional form has been selected and there are no omitted variables.

One should be aware, however, that the parameters that minimize the residuals of the transformed equation do not necessarily minimize the residuals of the original equation.

Strict exogeneity


For all observations, the expectation—conditional on the regressors—of the error term is zero:[9]

where is the data vector of regressors for the ith observation, and consequently is the data matrix or design matrix.

Geometrically, this assumption implies that and are orthogonal to each other, so that their inner product (i.e., their cross moment) is zero.

This assumption is violated if the explanatory variables are measured with error, or are endogenous.[10] Endogeneity can be the result of simultaneity, where causality flows back and forth between both the dependent and independent variable. Instrumental variable techniques are commonly used to address this problem.

Full rank


The sample data matrix must have full column rank.

Otherwise is not invertible and the OLS estimator cannot be computed.

A violation of this assumption is perfect multicollinearity, i.e. some explanatory variables are linearly dependent. One scenario in which this will occur is called "dummy variable trap," when a base dummy variable is not omitted resulting in perfect correlation between the dummy variables and the constant term.[11]

Multicollinearity (as long as it is not "perfect") can be present resulting in a less efficient, but still unbiased estimate. The estimates will be less precise and highly sensitive to particular sets of data.[12] Multicollinearity can be detected from condition number or the variance inflation factor, among other tests.

Spherical errors


The outer product of the error vector must be spherical.

This implies the error term has uniform variance (homoscedasticity) and no serial correlation.[13] If this assumption is violated, OLS is still unbiased, but inefficient. The term "spherical errors" will describe the multivariate normal distribution: if in the multivariate normal density, then the equation is the formula for a ball centered at μ with radius σ in n-dimensional space.[14]

Heteroskedasticity occurs when the amount of error is correlated with an independent variable. For example, in a regression on food expenditure and income, the error is correlated with income. Low income people generally spend a similar amount on food, while high income people may spend a very large amount or as little as low income people spend. Heteroskedastic can also be caused by changes in measurement practices. For example, as statistical offices improve their data, measurement error decreases, so the error term declines over time.

This assumption is violated when there is autocorrelation. Autocorrelation can be visualized on a data plot when a given observation is more likely to lie above a fitted line if adjacent observations also lie above the fitted regression line. Autocorrelation is common in time series data where a data series may experience "inertia." If a dependent variable takes a while to fully absorb a shock. Spatial autocorrelation can also occur geographic areas are likely to have similar errors. Autocorrelation may be the result of misspecification such as choosing the wrong functional form. In these cases, correcting the specification is one possible way to deal with autocorrelation.

When the spherical errors assumption may be violated, the generalized least squares estimator can be shown to be BLUE.[6]

See also


Other unbiased statistics



  1. ^ See chapter 7 of Johnson, R.A.; Wichern, D.W. (2002). Applied multivariate statistical analysis. Vol. 5. Prentice hall.
  2. ^ Theil, Henri (1971). "Best Linear Unbiased Estimation and Prediction". Principles of Econometrics. New York: John Wiley & Sons. pp. 119–124. ISBN 0-471-85845-5.
  3. ^ Plackett, R. L. (1949). "A Historical Note on the Method of Least Squares". Biometrika. 36 (3/4): 458–460. doi:10.2307/2332682.
  4. ^ David, F. N.; Neyman, J. (1938). "Extension of the Markoff theorem on least squares". Statistical Research Memoirs. 2: 105–116. OCLC 4025782.
  5. ^ Aitken, A. C. (1935). "On Least Squares and Linear Combinations of Observations". Proceedings of the Royal Society of Edinburgh. 55: 42–48. doi:10.1017/S0370164600014346.
  6. ^ a b Huang, David S. (1970). Regression and Econometric Methods. New York: John Wiley & Sons. pp. 127–147. ISBN 0-471-41754-8.
  7. ^ Hayashi, Fumio (2000). Econometrics. Princeton University Press. p. 13. ISBN 0-691-01018-8.
  8. ^ Walters, A. A. (1970). An Introduction to Econometrics. New York: W. W. Norton. p. 275. ISBN 0-393-09931-8.
  9. ^ Hayashi, Fumio (2000). Econometrics. Princeton University Press. p. 7. ISBN 0-691-01018-8.
  10. ^ Johnston, John (1972). Econometric Methods (Second ed.). New York: McGraw-Hill. pp. 267–291. ISBN 0-07-032679-7.
  11. ^ Wooldridge, Jeffrey (2012). Introductory Econometrics (Fifth international ed.). South-Western. p. 220. ISBN 978-1-111-53439-4.
  12. ^ Johnston, John (1972). Econometric Methods (Second ed.). New York: McGraw-Hill. pp. 159–168. ISBN 0-07-032679-7.
  13. ^ Hayashi, Fumio (2000). Econometrics. Princeton University Press. p. 10. ISBN 0-691-01018-8.
  14. ^ Ramanathan, Ramu (1993). "Nonspherical Disturbances". Statistical Methods in Econometrics. Academic Press. pp. 330–351. ISBN 0-12-576830-3.

Further reading