Bachelor of Engineering
The Bachelor of Engineering, commonly abbreviated as B.Eng., is an undergraduate academic degree awarded to a student after three to five years of studying engineering at a university or college. A B.Eng. degree will be accredited by one of the Engineering Council's professional bodies as suitable for registration as a chartered engineer. That might include the British Computer Society. Alternatively, it might be accredited directly by another professional body, such as the Institute of Electrical and Electronics Engineers (IEEE). The B.Eng. is mainly a route to chartered engineer, registered engineer or licensed engineer, and has been approved by representatives of the profession.
A B.Eng. has a greater emphasis on technical engineering aspects, for example, electronics and electrical circuits, than the B.Sc. However, topics covered in B.Eng. can overlap with B.Sc.
Most universities in the United States and Europe award the Bachelor of Science Engineering (B.Sc.Eng.), Bachelor of Engineering (B.Eng.), Bachelor of Engineering Science (B.Eng.Sc.), Bachelor of Science in Engineering (B.S.E.), or Bachelor of Applied Science (B.A.Sc.) degree to undergraduate students of engineering study. For example, Canada is the only country that awards the B.A.Sc. degree for graduating engineers. Other institutions award engineering degrees specific to the area of study, such as B.S.E.E. (Bachelor of Science in Electrical Engineering) and BSME (Bachelor of Science in Mechanical Engineering).
A less common variety of the degree is Baccalaureus in Arte Ingeniaria (BAI), a Latin name meaning Bachelor in the Art of Engineering. It is awarded by the University of Dublin, Ireland and is more commonly referred to as Bachelor of Engineering; some South African Universities refer to their Engineering degrees as B.Ing. (Baccalaureus Ingenieurswese - Afrikaans).
A Bachelor of Engineering degree will usually be undertaken in one field of engineering, which is sometimes noted in the degree postnominals, as in BE(Aero) or BEng(Elec). Common fields for the Bachelor of Engineering degree include the following fields:
- Aerospace Engineering
- Agricultural Engineering
- Automotive engineering
- Biological/Chemical Engineering — including Biochemical, Biomedical, Biosystems, Biomolecular, and Chemical engineering
- Chemical Engineering — deals with the process of converting raw materials or chemicals into more useful or valuable forms
- Clean Technology — use energy, water and raw materials and other inputs more efficiently and productively. Create less waste or toxicity and deliver equal or superior performance.
- Computer Engineering
- Civil Engineering — a wide-ranging field, including building engineering, civil engineering, construction engineering, industrial, manufacturing, mechanical, materials and control engineering
- Electrical and Computer Engineering/Electronic Engineering — very diverse field, including Computer Engineering, Communication/Communication systems engineering, Information Technology, Electrical Engineering, Electronics Engineering, Microelectronic Engineering, Microelectronics, Nanotechnology, Mechatronics, Software Engineering, Systems, Wireless and Telecommunications, Photovoltaic and Power Engineering
- Electrical Controls Engineering — a relatively new and more specialized subdiscipline of Electrical Engineering that focuses on integrating Electrical Controls, and their programming.
- Engineering Management — the application of engineering principles to the planning and operational management of industrial and manufacturing operations
- Environmental Engineering — includes fields such as Environmental, Geological, Geomatic, Mining, Marine, and Ocean engineering
- Fire Protection Engineering — the application of science and engineering principles to protect people and their environments from the destructive effects of fire and smoke.
- Geomatics Engineering — acquisition, modeling, analysis and management of spatial data. Focuses on satellite positioning, remote sensing, land surveying, wireless location and Geographic Information Systems (GIS).
- Geotechnical Engineering — a combination of civil and mining engineering, and involves the analysis of earth materials.
- Information Science and Engineering — same as Information Technology.
- Industrial Engineering — studies facilities planning, plant layout, work measurement, job design, methods engineering, human factors, manufacturing processes, operations management, statistical quality control, systems, psychology, and basic operations management
- Instrumentation Engineering — a branch of engineering dealing with measurement
- Integrated Engineering — a multi-disciplinary, design-project-based engineering degree program.
- Manufacturing Engineering: Includes methods engineering, manufacturing process planning, tool design, metrology, Robotics, Computer integrated manufacturing, operations management and manufacturing management
- Materials Engineering — includes metallurgy, polymer and ceramic engineering
- Mechanical Engineering — includes engineering of total systems where mechanical science principles apply to objects in motion including transportation, energy, buildings, aerospace, and machine design. Explores the applications of the theoretical fields of Mechanics, kinematics, thermodynamics, materials science, structural analysis, manufacturing, and electricity
- Mechatronics Engineering - includes a combination of mechanical engineering, electrical engineering, telecommunications engineering, control engineering and computer engineering
- Mining Engineering — deals with discovering, extracting, beneficiating, marketing, and utilizing mineral deposits.
- Nuclear Engineering — customarily includes nuclear fission, nuclear fusion, and related topics such as heat/thermodynamics transport, nuclear fuel or other related technology (e.g., radioactive waste disposal), and the problems of nuclear proliferation. May also include radiation protection, particle detectors, and medical physics.
- Plastic Engineering(Technology) — A vast field which includes plastic processing, Mold designing .....
- Production Engineering — term used in the UK and Europe similar to Industrial Engineering in N America - it includes engineering of machines, people, process and management. Explores the applications of the theoretical field of Mechanics.
- Textile Engineering — based on the conversion of three types of fiber into yarn, then fabric, then textiles
- Robotics and Automation Engineering — relates all engineering fields for implementing in robotics and automation
- Systems Science — focuses on the analysis, design, development and organization of complex systems
In Australia, the Bachelor of Engineering (BEng) is a four-year undergraduate degree course and a professional qualification. It is also available as a six-year sandwich course (where students are required to undertake a period of professional placement as part of the degree) or an eight-year part-time course through some universities. The Institution of Engineers, Australia (Engineers Australia) accredits degree courses and graduates of accredited courses are eligible for membership of the Institution. Bachelor of Engineering graduates may commence work as a graduate professional engineer upon graduation, although some may elect to undertake further study such as a Master's or Doctoral degree. Chartered Professional Engineer (CPEng) status or the various State registration requirements are usually obtained in later years. Graduates with formal engineering qualifications in Australia are often referred to as Professional Engineers to distinguish them from other professions where the term "Engineer" is used loosely.
In Canada, a degree for studies in an accredited undergraduate engineering program is named Bachelor of Engineering (B.Eng., B.Ing. in French) or a Bachelor of Applied Science (B.A.Sc.).
Through the Canadian Engineering Accreditation Board (CEAB), Engineers Canada accredits Canadian undergraduate engineering programs that meet the standards of the profession. Graduates of those programs are deemed by the profession to have the required academic qualifications to be licensed as professional engineers in Canada. This practice is intended to maintain standards of education and allow mobility of engineers in different provinces of Canada.
A CEAB-accredited degree is the minimum academic requirement for registration as a professional engineer anywhere in the country, and the standard against which all other engineering academic qualifications are measured. Graduation from an accredited program, which normally involves four years of study, is a required first step to becoming a Professional Engineer. Regulation and accreditation are accomplished through a self-governing body (the name of which varies from province to province), which is given the power by statute to register and discipline engineers, as well as regulate the field of engineering in the individual provinces.
Graduates of non-CEAB-accredited programs must demonstrate that their education is at least equivalent to that of a graduate of a CEAB-accredited program.
In Germany, the Bachelor of Engineering was introduced as part of implementation of the Bologna process. However, this degree is in fact mostly offered by German Fachhochschule-institutions Universities of Applied Sciences. German technical universities award a Bachelor of Science in engineering rather than the BEng degree.
The situation is similar in Finland as in Germany. Universities of applied sciences (ammattikorkeakoulu) grant professional bachelor's degrees (insinööri (amk)). The degree does not traditionally prepare for further study, but due to the Bologna process, a completely new degree of ylempi insinööri (yamk) has been introduced for engineers who wish to continue studying after some work experience. Before 2005, academic universities (see Education in Finland) did not make an administrative distinction between studies on the Bachelor's and Master's level, and the Master's level diplomi-insinööri was the first degree to be received. Due to the Bologna process, an intermediate "Bachelor of Science in Engineering" (tekniikan kandidaatti) has been introduced.
In Pakistan: Bachelor of Technology (Honors) degree is a four-year undergraduate university level degree, including Engineering and Applied Science courses, supervised industrial Practical training and projects. The prerequisite for this program is a three-year Diploma of Associate Engineering in specific fields e.g. Chemical Engineering, Electronics Engineering, Electrical Engineering, Mechanical Engineering and Civil Engineering etc. or two-year Fsc pre engineering. B.Tech Honors four years degree awarded by public and private sector Universities under the supervision of Higher Education Commission (Govt. of Pakistan). Public & private universities Such as IIUI,IUB, MUET, NED, UET, PRESTON, INDUS offer admission in B-Tech degree Program. The degree of B.Tech(Hons)04 years degree was treated at par with a Bachelor of Engineering/Bachelor of Science Engineering. B.Tech program was formally launched in 1973 in Pakistan and then Ministry of Education directed to give status of B.Tech (Hons) degree at par with B.Sc Engineering/B.E degree,& professionals called B-Tech Engineers according to the letter No. 15-29/73-Tech. According to the letter no PEC/4-P/QEC, PEC stated that B.Tech degree will be considered equivalent to B.Sc/BE and the same decision was taken in 9th inter-provincial ministers conference at Quetta in 1986, 39th HEC meeting on 12-2-98, FPSC in its letter no F4-89/2002-R, there is no difference in the program objectives and learning outcomes of B.Tech or BE.
In the Netherlands the Bachelor of Engineering was also introduced as part of implementation of the bologna process, the same as in Germany. The degree is only offered by Dutch Hogeschool-institutions and is equivalent to the Dutch engineer's degree "ingenieur" (ing.). A Dutch BEng involves a rigorous study of four years and is only awarded in the field of aeronautical engineering, mechanical engineering, software engineering, industrial engineering, or electrical engineering. Completion of a Dutch engineer's study in the field biochemical engineering, biomedical engineering, chemical engineering, environmental engineering, material engineering is however awarded with a Bachelor of Applied Science degree. Dutch technical universities award a Bachelor of Science in engineering (BScEng) instead of the BEng degree.
In India, the Bachelor of Engineering degree is a professional engineering undergraduate degree awarded after completion of four years of engineering study and research.Institutes of national importance, like Indian Institute of Technology (IIT) and National Institute of Technology (NIT), offer Bachelor of Technology (B-Tech) degree since the courses they offer are exclusively engineering related. Some Indian universities, mainly private institutes which are affiliated to regional universities, offer engineering degree under the name of Bachelor of Engineering (B.Eng); but whichever name is used, the degree course follows the standard curriculum laid down by the All India Council for Technical Education (AICTE) and the University Grants Commission (India) (UGC).
In general Universities offer B Tech and colleges affiliated to Universities will offer as BE, however there is no difference in the programme objectives and learning outcomes of B.E or B.Tech. Eligibility for entry is 12 years of school education. Generally the first year (first two semesters) is common to all branches, and has the same subjects of study. Courses divert after first year. The medium of instruction and examination is English. Generally, universities in India offer engineering degree in the following branches: Civil Engineering, Mechanical Engineering, Electrical (and Electronics), Electronics (and Communications or Telecom) Engineering, Instrumentation and Control Engineering, Computer Engineering, Information Technology, Chemical Engineering, Metallurgical Engineering, Aerospace Engineering, Production Engineering, Systems Science, Biotechnology Engineering (Chemical Engineering cluster), Biomedical Engineering, software engineering and Tool Engineering. The AICTE, UGC and the Indian Government are responsible for approving engineering colleges and branches/courses. Only those universities which have been approved by these bodies can award degrees which are legally valid and are accepted as qualifiers for jobs in the central/state government and in the private sector.
In South Africa, the Bachelor of Engineering or Bachelor of Science in Engineering (BEng/BIng (for Afrikaans Universities) or B.Sc. Eng.) is awarded to a student who has completed four years course in engineering which consists of eight semesters. The degree is regulated by ECSA (Engineering Council of South Africa). In South Africa, the B.Tech is awarded by Universities of Technology and Comprehensive Universities - as distinct from Traditional Universities - and is generally practice or career oriented, as opposed to academically oriented. Relatedly, it is often offered in areas in which there is no corresponding B.Sc. or BComm (e.g. B.Tech: Forestry Management, B.Tech: Explosives Management ).
The degree is obtained after 4 years of study, and is usually offered as a 1-year programme, following completion of a relevant three-year National Diploma.
The B.Tech (often) carries the same points as other bachelor's degrees in terms of South Africa's National Qualifications Framework. At the same time, however, due to its orientation, it does not usually grant admission to the corresponding M.Sc. or MComm program, and students instead pursue the Master of Technology (M.Tech.) and Doctor of Technology (D.Tech.) degrees; it does grant admission to MBA programmes (see List of business schools in South Africa). In some cases, however, admission may be granted, once demonstrated that the student meets the necessary academic level to complete the requirements of the M.Sc or MComm.
- Bachelor of Technology
- Bachelor's degree
- Bachelor of Applied Science
- Bachelor of Science in Information Technology
- Engineer's degree
- Master of Engineering (M.E. or MEng)
- Vocational university
- "Example Degrees". Retrieved 2013-01-28.
- School of Engineering:Trinity College Dublin, The University of Dublin, Ireland
-  Archived May 5, 2010, at the Wayback Machine.
- Mining engineering
- Undergraduate Degrees | WVU Statler College
- List of systems sciences organizations
- List of systems engineering universities
- Accreditation | Engineers Canada
- Canadian Engineering Accreditation Board | Engineers Canada
- "Canadian Engineering Accreditation Board". Archived from the original on 2014-02-02.