A milk watcher, milk saver, pot watcher, pot minder, milk guard, or boil over preventer is a cooking utensil placed at the bottom of a pot to prevent boiling over of liquids, and especially the burning (scorching) of milk.
A milk watcher is a disk with a raised rim, and is notched on one side (see images). Some milk savers are designed so they can be used with the obverse or reverse side facing up, so they appear to have two notches. The interior of the disk is not level; it slants upward toward the notched side creating a space just behind the notch where water vapor can collect. Water vapor is trapped under the Milk Saver causing the notched side to rise up, releasing the water vapor at the same time circulating liquid around the base of the pot and making a rattling noise.
The milk watcher was invented by Vincent Hartley in 1938 and became very popular in latin country.
How it works
Normally, boiling water does not boil over. When fats, starches, and some other substances are present in boiling water, for example by adding milk or pasta, boiling over can occur. A film forms on the surface of the boiling liquid; for example, cream can boil over as milk fat separates from the milk. The increased viscosity of the liquid causes the steam bubbles to form foam trapped under the film, pushing the film up and over the lip of the pot, boiling over. A milk watcher disrupts this process by collecting small bubbles of steam into one large bubble and releasing it in a manner which may puncture the surface film. The device also rattles when boiling occurs, alerting the cook who may then lower the heat setting of the stove.
By circulating fluid around the bottom of the pot the device may also prevent material from being deposited and eventually burned on the pot's bottom.
Media related to Milk watcher at Wikimedia Commons