This article may require cleanup to meet Wikipedia's quality standards. (November 2009) (Learn how and when to remove this template message)
A coachbuilder is a manufacturer of bodies for passenger-carrying vehicles.[note 1] Coachwork is the body of an automobile or a bus or a horse-drawn passenger vehicle. The word coach was derived from the Hungarian town of Kocs. By extension coach also may be used for a railroad passenger car or railway carriage.
Custom or bespoke bodies require a separate chassis to avoid the vast expense of designing and building a suitable unibody or monocoque structure. While the enormous cost of suitable machinery to make steel structures may be avoided by moulding synthetic materials for one-off bodies the high costs of structural design and development remain prohibitively expensive.
As well as true custom or bespoke bodies coachbuilders also made short runs of more or less identical bodies to the order of dealers or the manufacturer of a chassis. The same body design might then be adjusted to suit different brands of chassis. For example Salmons & Sons' Tickford bodies with a patent device to raise or lower a convertible's roof, used on their 19th century carriages, or Wingham convertible bodies by Martin Walter
Coach-built implies that a body's frame is wooden but it may not be so. Coachbuilt also describes a recreational vehicle or motorhome which has been purpose-built. A whole new body has been made for a bare chassis as opposed to a conversion built inside an existing vehicle body.
- 1 Before automobiles
- 2 Early production
- 3 Ultra luxury vehicles
- 4 Unibody construction
- 5 List of coachbuilders
- 6 See also
- 7 Notes
- 8 Citations
- 9 External links
A British trade association the Worshipful Company of Coachmakers and Coach Harness Makers, was incorporated in 1630. Some British coachmaking firms operating in the 20th century were established even earlier. Rippon was active in the time of Queen Elizabeth I, Barker founded in 1710 by an officer in Queen Anne's Guards, Brewster a relative newcomer (though oldest in the U.S.), formed in 1810.
In the early motoring days when series production did not yet exist the process of acquiring a new vehicle needed two major decisions, selection of a vehicle manufacturer and selection of a coachbuilder. Already accustomed to ordering carriages from a coachbuilder, the buyer would select an automobile manufacturer which might supply their own catalogued bodies but which would be expected to provide primarily only a bare "chassis".
This "chassis" would be delivered by the manufacturer to the coachbuilder of the buyer's choice. The "chassis" would be a rolling chassis which included the chassis frame, drivetrain (engine, gearbox, differential, axles, wheels), brakes, suspension, complete steering system including the wheel, radiator, scuttle and dashboard. The manufacturer delivered the chassis with lighting system, spare wheel(s) (but probably without tyres), front and rear mudguards and (later) bumpers. The very easily damaged honeycomb radiator, later enclosed and protected by a shell, became the main visual element identifying the chassis' brand. The manufacturer retained an element of control over bodies. Bodies not approved by the chassis manufacturer would lose the chassis manufacturer's chassis warranties.
Until the second World War it would not have been unusual to order the most popular cars as only a chassis and have a local coachbuilder put a body (passenger or commercial) on it for you. the Austin 7s of the 1920s and 1930s were favourite subjects.
For mass production because the long-established and refined skills and tools (such as the English wheel) used to build the wooden and metal bodies of vehicles were so specialized, most USA automobile manufacturers contracted with existing coachbuilders to produce bodies. For example, Fisher Body built all of Cadillac's closed bodies in the 1910s and eventually all General Motors mass-produced products.
Ultra luxury vehicles
Commonly, larger dealers or distributors of ultra-luxury cars would pre-order stock chassis and the bodies they thought most likely to sell, and stock them in suitable quantities for sale off their showroom floor.
Though automobile manufacturers brought body building skills in-house, the practice of bespoke or custom coachbuilding remained in favour among the wealthy, who continued the habit of centuries past. All ultra-luxury vehicles sold as chassis only. For instance, when Duesenberg introduced their Model J, it was offered as chassis only, for $8,500. Other examples include the Bugatti Type 57, Cadillac V-16, Ferrari 250, Isotta Fraschini Tipo 8, and all Rolls-Royces produced before World War II. Delahaye had no in-house coachworks, so all its chassis were bodied by independents, who created some of their most attractive designs on the Type 135. Most of the Delahayes were bodied by Chapron, Labourdette, Franay, Saoutchik, Figoni & Falaschi, Pennock, and many more.[clarification needed]
The advent of unibody construction, where the car body is unified with, and structurally integral to the chassis, made custom coachbuilding uneconomic. Many coachbuilders closed down, were bought by manufacturers or changed their core business to other activities:
- transforming into dedicated design or styling houses, subcontracting to automotive brands (e.g. Zagato, Frua, Bertone, Pininfarina)
- transforming into general coachwork series manufacturers, subcontracting to automotive brands (e.g. Karmann, Bertone, Vignale, Pininfarina)
- manufacturing runs of special coachworks for trucks, delivery vans, touringcars, ambulances, fire engines, public transport vehicles, etc. (e.g. Pennock, Van Hool, Plaxton, Heuliez)
- becoming technical partner for development of e.g. roof constructions (e.g. Karmann, Heuliez) or producer of various (aftermarket) automotive parts (e.g. Giannini)
Independent coachbuilders survived for a time after the mid-20th century, making bodies for the chassis produced by low-production companies such as Rolls-Royce, Ferrari, and Bentley. Producing body dies is extremely expensive (a single door die can run to US$40,000), which is usually only considered practical when large numbers are involved—though that was the path taken by Rolls-Royce and Bentley after 1945 for their own in-house production. Because dies for pressing metal panels are so costly, from the mid 20th century, many vehicles, most notably the Chevrolet Corvette, were clothed with large panels of glass-fibre reinforced resin, which only require inexpensive moulds. Glass has since been replaced by more sophisticated materials but generally these replace, if necessary hand-formed, metal only where weight is of paramount importance.
List of coachbuilders
- Fernandel & Darren
- Figoni et Falaschi
- Hibbard & Darrin (formed by Americans)
- Letourneur et Marchand
- Jean Barou (1949 Talbot-Lago T26 Grand Sport Coupe)
- Alessio (of Turin, responsible for the first eight FIATs built),
- Neri & Bonacini, creators of the "Nembo" Ferrari specials and the Lamborghini 400GT Monza
- Gordon England
- Freestone and Webb
- J Gurney Nutting & Co Limited
- Jarvis of Wimbledon
- Martin Walter
- Arthur Mulliner
- H. J. Mulliner & Co.
- Mulliner Park Ward
- Mulliners (Birmingham)
- Park Ward
- Harold Radford
- Tilbury, originators of the Tilbury carriage.
- Thrupp & Maberly
- Vanden Plas
- Vincent of Reading
- Wingham Martin Walter
- Walter Alexander & Sons (Falkirk). Now Alexander Dennis Ltd
- James Young
- Brewster & Co.
- Budd Company
- Earl Automobile Works
- KEM Motorworks
- N2A motors Inc. a Langmesser Co. (coachbuilder since 2007)
- SSZ Motorcars
Survivors of the unibody production-line system
- Construction has always been a skilled trade requiring a relatively lightweight product with sufficient strength. The manufacture of necessarily fragile but satisfactory wheels by a separate trade, a wheelwright, held together by iron or steel tyres was always most critical.
The word coachbuilder is recorded as early as 1794. From about 1000CE rougher work was carried out by a wainwright, a wagon-builder, later names: cartwright - a carpenter who makes carts, also (from 1587) coachwright as well as (from 1599) coachmaker. Subtrades: wheelwright, coachjoiner, etc. Oxford English Dictionary 2011
- Coach. Oxford English Dictionary (1st ed.). Oxford University Press. 1933.
- G.N. Georgano, G. N. Cars: Early and Vintage, 1886-1930. (London: Grange-Universal, 1990), p.206
- "Steel Bodies: In an Eggshell", in Ward, Ian, executive editor. World of Automobiles (London: Orbis Publishing, 1974), p. 2178.
- G.N. Georgano, p.24 cap.
- G.N. Georgano.
- Coway web site Archived 2012-04-24 at the Wayback Machine.
- Jankel web site Archived 2012-04-05 at the Wayback Machine.
- "Wheelchair Accessible Vehicles, Mobility Cars, Disability Car, Adapted Vehicles for Sale". jubileemobility.co.uk.
- "Specialist Vehicle Converter & Supplier - MacNeillie". MacNeillie.
- "Hearse for Sale - Limousine for Sale - Wilcox Limousines". Wilcox Limousines.
- "Woodall Nicholson". woodall-nicholson.co.uk.
|Wikimedia Commons has media related to Coachbuilders.|
|Wikimedia Commons has media related to Coachbuilder badges.|
- Webmagazine about Coachbuilders from past to present
- Encyclopedia of American Coachbuilders
- Goldarths: The Fine Art of Coachbuilding
- The Kellner Affair: Matters of Life and Death by Peter M. Larsen and Ben Erickson. Details Jacques Kellner and George Paulin involvement in the French Resistance.