Mean value theorem
|Part of a series of articles about|
In mathematics, the mean value theorem states, roughly, that for a given planar arc between two endpoints, there is at least one point at which the tangent to the arc is parallel to the secant through its endpoints.
This theorem is used to prove statements about a function on an interval starting from local hypotheses about derivatives at points of the interval.
It is one of the most important results in real analysis.
- 1 History
- 2 Formal statement
- 3 Proof
- 4 A simple application
- 5 Cauchy's mean value theorem
- 6 Generalization for determinants
- 7 Mean value theorem in several variables
- 8 Mean value theorem for vector-valued functions
- 9 Mean value theorems for definite integrals
- 10 A probabilistic analogue of the mean value theorem
- 11 Generalization in complex analysis
- 12 See also
- 13 Notes
- 14 External links
A special case of this theorem was first described by Parameshvara (1370–1460), from the Kerala school of astronomy and mathematics in India, in his commentaries on Govindasvāmi and Bhāskara II. A restricted form of the theorem was proved by Rolle in 1691; the result was what is now known as Rolle's theorem, and was proved only for polynomials, without the techniques of calculus. The mean value theorem in its modern form was stated and proved by Cauchy in 1823.
The mean value theorem is a generalization of Rolle's theorem, which assumes , so that the right-hand side above is zero.
exists as a finite number or equals or . If finite, that limit equals . An example where this version of the theorem applies is given by the real-valued cube root function mapping , whose derivative tends to infinity at the origin.
Note that the theorem, as stated, is false if a differentiable function is complex-valued instead of real-valued. For example, define for all real . Then
while for any real .
The expression gives the slope of the line joining the points and , which is a chord of the graph of , while gives the slope of the tangent to the curve at the point . Thus the Mean value theorem says that given any chord of a smooth curve, we can find a point lying between the end-points of the chord such that the tangent at that point is parallel to the chord. The following proof illustrates this idea.
Define , where is a constant. Since is continuous on and differentiable on , the same is true for . We now want to choose so that satisfies the conditions of Rolle's theorem. Namely
By Rolle's theorem, since is differentiable and , there is some in for which , and it follows from the equality that,
A simple application
Assume that f is a continuous, real-valued function, defined on an arbitrary interval I of the real line. If the derivative of f at every interior point of the interval I exists and is zero, then f is constant in the interior.
Proof: Assume the derivative of f at every interior point of the interval I exists and is zero. Let (a, b) be an arbitrary open interval in I. By the mean value theorem, there exists a point c in (a,b) such that
This implies that f(a) = f(b). Thus, f is constant on the interior of I and thus is constant on I by continuity. (See below for a multivariable version of this result.)
- Only continuity of f, not differentiability, is needed at the endpoints of the interval I. No hypothesis of continuity needs to be stated if I is an open interval, since the existence of a derivative at a point implies the continuity at this point. (See the section continuity and differentiability of the article derivative.)
- The differentiability of f can be relaxed to one-sided differentiability, a proof given in the article on semi-differentiability.
Cauchy's mean value theorem
Cauchy's mean value theorem, also known as the extended mean value theorem, is a generalization of the mean value theorem. It states: If functions f and g are both continuous on the closed interval [a, b], and differentiable on the open interval (a, b), then there exists some c ∈ (a, b), such that
Of course, if g(a) ≠ g(b) and if g′(c) ≠ 0, this is equivalent to:
which is parallel to the line defined by the points (f(a), g(a)) and (f(b), g(b)). However Cauchy's theorem does not claim the existence of such a tangent in all cases where (f(a), g(a)) and (f(b), g(b)) are distinct points, since it might be satisfied only for some value c with f′(c) = g′(c) = 0, in other words a value for which the mentioned curve is stationary; in such points no tangent to the curve is likely to be defined at all. An example of this situation is the curve given by
which on the interval [−1, 1] goes from the point (−1, 0) to (1, 0), yet never has a horizontal tangent; however it has a stationary point (in fact a cusp) at t = 0.
Cauchy's mean value theorem can be used to prove l'Hôpital's rule. The mean value theorem is the special case of Cauchy's mean value theorem when g(t) = t.
Proof of Cauchy's mean value theorem
The proof of Cauchy's mean value theorem is based on the same idea as the proof of the mean value theorem.
- Suppose g(a) ≠ g(b). Define h(x) = f(x) − rg(x), where r is fixed in such a way that h(a) = h(b), namely
- Since f and g are continuous on [a, b] and differentiable on (a, b), the same is true for h. All in all, h satisfies the conditions of Rolle's theorem: consequently, there is some c in (a, b) for which h′(c) = 0. Now using the definition of h we have:
- which implies the result.
- If g(a) = g(b), then, applying Rolle's theorem to g, it follows that there exists c in (a, b) for which g′(c) = 0. Using this choice of c, Cauchy's mean value theorem (trivially) holds.
Generalization for determinants
Assume that and are differentiable functions on that are continuous on . Define
There exists such that .
and if we place , we get Cauchy's mean value theorem. If we place and we get Lagrange's mean value theorem.
The proof of the generalization is quite simple: each of and are determinants with two identical rows, hence . The Rolle's theorem implies that there exists such that .
Mean value theorem in several variables
The mean value theorem generalizes to real functions of multiple variables. The trick is to use parametrization to create a real function of one variable, and then apply the one-variable theorem.
Let be an open connected subset of , and let be a differentiable function. Fix points such that the interval lies in , and define . Since is a differentiable function in one variable, the mean value theorem gives:
for some between 0 and 1. But since and , computing explicitly we have:
where denotes a gradient and a dot product. Note that this is an exact analog of the theorem in one variable (in the case this is the theorem in one variable). By the Cauchy–Schwarz inequality, the equation gives the estimate:
In particular, when the partial derivatives of are bounded, is Lipschitz continuous (and therefore uniformly continuous). Note that is not assumed to be continuously differentiable nor continuous on the closure of . However, in the above, we used the chain rule so the existence of would not be sufficient.
As an application of the above, we prove that is constant if is open and connected and every partial derivative of is 0. Pick some point , and let . We want to show for every . For that, let . Then E is closed and nonempty. It is open too: for every ,
for every in some neighborhood of . (Here, it is crucial that and are sufficiently close to each other.) Since is connected, we conclude .
The above arguments are made in a coordinate-free manner; hence, they generalize to the case when is a subset of a Banach space.
Mean value theorem for vector-valued functions
There is no exact analog of the mean value theorem for vector-valued functions.
Theorem. For a continuous vector-valued function differentiable on , there exists such that .
Jean Dieudonné in his classic treatise Foundations of Modern Analysis discards the mean value theorem and replaces it by mean inequality as the proof is not constructive and one cannot find the mean value and in applications one only needs mean inequality. Serge Lang in Analysis I uses the mean value theorem, in integral form, as an instant reflex but this use requires the continuity of the derivative. If one uses the Henstock–Kurzweil integral one can have the mean value theorem in integral form without the additional assumption that derivative should be continuous as every derivative is Henstock–Kurzweil integrable. The problem is roughly speaking the following: If f : U → Rm is a differentiable function (where U ⊂ Rn is open) and if x + th, x, h ∈ Rn, t ∈ [0, 1] is the line segment in question (lying inside U), then one can apply the above parametrization procedure to each of the component functions fi (i = 1, ..., m) of f (in the above notation set y = x + h). In doing so one finds points x + tih on the line segment satisfying
But generally there will not be a single point x + t*h on the line segment satisfying
for all i simultaneously. For example, define:
Then , but and are never simultaneously zero as ranges over .)
However a certain type of generalization of the mean value theorem to vector-valued functions is obtained as follows: Let f be a continuously differentiable real-valued function defined on an open interval I, and let x as well as x + h be points of I. The mean value theorem in one variable tells us that there exists some t* between 0 and 1 such that
On the other hand, we have, by the fundamental theorem of calculus followed by a change of variables,
Thus, the value f′(x + t*h) at the particular point t* has been replaced by the mean value
This last version can be generalized to vector valued functions:
- Lemma 1. Let U ⊂ Rn be open, f : U → Rm continuously differentiable, and x ∈ U, h ∈ Rn vectors such that the line segment x + th, 0 ≤ t ≤ 1 remains in U. Then we have:
- where Df denotes the Jacobian matrix of f and the integral of a matrix is to be understood componentwise.
Proof. Let f1, ..., fm denote the components of f and define:
Then we have
The claim follows since Df is the matrix consisting of the components
- Lemma 2. Let v : [a, b] → Rm be a continuous function defined on the interval [a, b] ⊂ R. Then we have
Proof. Let u in Rm denote the value of the integral
Now we have (using the Cauchy–Schwarz inequality):
Now cancelling the norm of u from both ends gives us the desired inequality.
- Mean Value Inequality. If the norm of Df(x + th) is bounded by some constant M for t in [0, 1], then
Proof. From Lemma 1 and 2 it follows that
Mean value theorems for definite integrals
First mean value theorem for definite integrals
Let f : [a, b] → R be a continuous function. Then there exists c in (a, b) such that
Since the mean value of f on [a, b] is defined as
we can interpret the conclusion as f achieves its mean value at some c in (a, b).
In general, if f : [a, b] → R is continuous and g is an integrable function that does not change sign on [a, b], then there exists c in (a, b) such that
Proof of the first mean value theorem for definite integrals
Suppose f : [a, b] → R is continuous and g is a nonnegative integrable function on [a, b]. By the extreme value theorem, there exists m and M such that for each x in [a, b], and . Since g is nonnegative,
If , we're done since
so for any c in (a, b),
If I ≠ 0, then
By the intermediate value theorem, f attains every value of the interval [m, M], so for some c in [a, b]
Finally, if g is negative on [a, b], then
and we still get the same result as above.
Second mean value theorem for definite integrals
There are various slightly different theorems called the second mean value theorem for definite integrals. A commonly found version is as follows:
- If G : [a, b] → R is a positive monotonically decreasing function and φ : [a, b] → R is an integrable function, then there exists a number x in (a, b] such that
Here stands for , the existence of which follows from the conditions. Note that it is essential that the interval (a, b] contains b. A variant not having this requirement is:
- If G : [a, b] → R is a monotonic (not necessarily decreasing and positive) function and φ : [a, b] → R is an integrable function, then there exists a number x in (a, b) such that
Mean value theorem for integration fails for vector-valued functions
If the function returns a multi-dimensional vector, then the MVT for integration is not true, even if the domain of is also multi-dimensional.
For example, consider the following 2-dimensional function defined on an -dimensional cube:
Then, by symmetry it is easy to see that the mean value of over its domain is (0,0):
However, there is no point in which , because everywhere.
A probabilistic analogue of the mean value theorem
Let X and Y be non-negative random variables such that E[X] < E[Y] < ∞ and (i.e. X is smaller than Y in the usual stochastic order). Then there exists an absolutely continuous non-negative random variable Z having probability density function
Let g be a measurable and differentiable function such that E[g(X)], E[g(Y)] < ∞, and let its derivative g′ be measurable and Riemann-integrable on the interval [x, y] for all y ≥ x ≥ 0. Then, E[g′(Z)] is finite and
Generalization in complex analysis
As noted above, the theorem does not hold for differentiable complex-valued functions. Instead, a generalization of the theorem is stated such:
Let f : Ω → C be a holomorphic function on the open convex set Ω, and let a and b be distinct points in Ω. Then there exist points u, v on Lab (the line segment from a to b) such that
Where Re() is the Real part and Im() is the Imaginary part of a complex-valued function.
- Weisstein, Eric. "Mean-Value Theorem". MathWorld. Wolfram Research. Retrieved 24 March 2011.
- J. J. O'Connor and E. F. Robertson (2000). Paramesvara, MacTutor History of Mathematics archive.
- A. Besenyei, Historical development of the mean value theorem, http://abesenyei.web.elte.hu/publications/meanvalue.pdf
- Rudin, Walter (1976). Principles of Mathematical Analysis (3rd ed.) (PDF). New York: McGraw-Hill. p. 113. ISBN 978-0-07-054235-8.
- Michael Comenetz (2002). Calculus: The Elements. World Scientific. p. 159. ISBN 978-981-02-4904-5.
- Hobson, E. W. (1909). "On the Second Mean-Value Theorem of the Integral Calculus". Proc. London Math Soc. S2–7 (1): 14–23. doi:10.1112/plms/s2-7.1.14. MR 1575669.
- Di Crescenzo, A. (1999). "A Probabilistic Analogue of the Mean Value Theorem and Its Applications to Reliability Theory". J. Appl. Prob. 36 (3): 706–719. JSTOR 3215435.
- "Complex Mean-Value Theorem". PlanetMath. PlanetMath.
- Hazewinkel, Michiel, ed. (2001), "Cauchy theorem", Encyclopedia of Mathematics, Springer, ISBN 978-1-55608-010-4
- PlanetMath: Mean-Value Theorem
- Weisstein, Eric W. "Mean value theorem". MathWorld.