In computer and machine-based telecommunications terminology, a character is a unit of information that roughly corresponds to a grapheme, grapheme-like unit, or symbol, such as in an alphabet or syllabary in the written form of a natural language.
Examples of characters include letters, numerical digits, common punctuation marks (such as "." or "-"), and whitespace. The concept also includes control characters, which do not correspond to visible symbols but rather to instructions to format or process the text. Examples of control characters include carriage return or tab, as well as instructions to printers or other devices that display or otherwise process text.
Characters are typically combined into strings.
Historically, the term character was also used to just denote a specific number of contiguous bits. While a character is most commonly assumed to refer to 8 bits (one byte) today, other definitions, like 6-bit character code was once popular (using only upper case, while enough bits to also represent lower case, not with numbers and punctuation allowed for), and even 5-bit Baudot code have been used in the past as well, and while the term has also been applied to 4 bits with only 16 possible values, it wasn't meant to, nor can, represent the full English alphabet. See also Universal Character Set characters, where 8 bits are not enough to represent, while all can be represented with one or more 8-bit code units with UTF-8.
Computers and communication equipment represent characters using a character encoding that assigns each character to something – an integer quantity represented by a sequence of digits, typically – that can be stored or transmitted through a network. Two examples of usual encodings are ASCII and the UTF-8 encoding for Unicode. While most character encodings map characters to numbers and/or bit sequences, Morse code instead represents characters using a series of electrical impulses of varying length.
This section needs additional citations for verification. (January 2019) (Learn how and when to remove this template message)
Historically, the term character has been widely used by industry professionals to refer to an encoded character, often as defined by the programming language or API. Likewise, character set has been widely used to refer to a specific repertoire of characters that have been mapped to specific bit sequences or numerical codes. The term glyph is used to describe a particular visual appearance of a character. Many computer fonts consist of glyphs that are indexed by the numerical code of the corresponding character.
With the advent and widespread acceptance of Unicode and bit-agnostic coded character sets,[clarification needed] a character is increasingly being seen as a unit of information, independent of any particular visual manifestation. The ISO/IEC 10646 (Unicode) International Standard defines character, or abstract character as "a member of a set of elements used for the organisation, control, or representation of data". Unicode's definition supplements this with explanatory notes that encourage the reader to differentiate between characters, graphemes, and glyphs, among other things. Such differentiation is an instance of the wider theme of the separation of presentation and content.
For example, the Hebrew letter aleph ("א") is often used by mathematicians to denote certain kinds of infinity (ℵ), but it is also used in ordinary Hebrew text. In Unicode, these two uses are considered different characters, and have two different Unicode numerical identifiers ("code points"), though they may be rendered identically. Conversely, the Chinese logogram for water ("水") may have a slightly different appearance in Japanese texts than it does in Chinese texts, and local typefaces may reflect this. But nonetheless in Unicode they are considered the same character, and share the same code point.
The Unicode standard also differentiates between these abstract characters and coded characters or encoded characters that have been paired with numeric codes that facilitate their representation in computers.
The combining character is also addressed by Unicode. For instance, Unicode allocates a code point to each of
- 'i ' (U+0069),
- the combining diaeresis (U+0308), and
- 'ï' (U+00EF).
This makes it possible to code the middle character of the word 'naïve' either as a single character 'ï' or as a combination of the character 'i ' with the combining diaeresis: (U+0069 LATIN SMALL LETTER I + U+0308 COMBINING DIAERESIS); this is also rendered as 'ï '.
These are considered canonically equivalent by the Unicode standard.
A char in the C programming language is a data type with the size of exactly one byte, which in turn is defined to be large enough to contain any member of the “basic execution character set”. The exact number of bits can be checked via
CHAR_BIT macro. By far the most common size is 8 bits, and the POSIX standard requires it to be 8 bits. In newer C standards char is required to hold UTF-8 code units which requires a minimum size of 8 bits.
A Unicode code point may require as many as 21 bits. This will not fit in a char on most systems, so more than one is used for some of them, as in the variable-length encoding UTF-8 where each code point takes 1 to 4 bytes. Furthermore, a "character" may require more than one code point (for instance with combining characters), depending on what is meant by the word "character".
The fact that a character was historically stored in a single byte led to the two terms ("char" and "character") being used interchangeably in most documentation. This often makes the documentation confusing or misleading when multibyte encodings such as UTF-8 are used, and has led to inefficient and incorrect implementations of string manipulation functions (such as computing the "length" of a string as a count of code units rather than bytes). Modern POSIX documentation attempts to fix this, defining "character" as a sequence of one or more bytes representing a single graphic symbol or control code, and attempts to use "byte" when referring to char data. However it still contains errors such as defining an array of char as a character array (rather than a byte array).
Unicode can also be stored in strings made up of code units that are larger than char. These are called "wide characters". The original C type was called wchar_t. Due to some platforms defining wchar_t as 16 bits and others defining it as 32 bits, recent versions have added char16_t, char32_t. Even then the objects being stored might not be characters, for instance the variable-length UTF-16 is often stored in arrays of char16_t.
- Character literal
- Character (symbol)
- Fill character
- Combining character
- Universal Character Set characters
- "Definition of CHARACTER". www.merriam-webster.com. Retrieved 2018-04-01.
- Dreyfus, Phillippe (1958). "System design of the Gamma 60". Managing Requirements Knowledge, International Workshop on, Los Angeles. New York. pp. 130–133. doi:10.1109/AFIPS.1958.32.
[…] Internal data code is used: Quantitative (numerical) data are coded in a 4-bit decimal code; qualitative (alpha-numerical) data are coded in a 6-bit alphanumerical code. The internal instruction code means that the instructions are coded in straight binary code.
As to the internal information length, the information quantum is called a "catena," and it is composed of 24 bits representing either 6 decimal digits, or 4 alphanumerical characters. This quantum must contain a multiple of 4 and 6 bits to represent a whole number of decimal or alphanumeric characters. Twenty-four bits was found to be a good compromise between the minimum 12 bits, which would lead to a too-low transfer flow from a parallel readout core memory, and 36 bits or more, which was judged as too large an information quantum. The catena is to be considered as the equivalent of a character in variable word length machines, but it cannot be called so, as it may contain several characters. It is transferred in series to and from the main memory.
Not wanting to call a "quantum" a word, or a set of characters a letter, (a word is a word, and a quantum is something else), a new word was made, and it was called a "catena." It is an English word and exists in Webster's although it does not in French. Webster's definition of the word catena is, "a connected series;" therefore, a 24-bit information item. The word catena will be used hereafter.
The internal code, therefore, has been defined. Now what are the external data codes? These depend primarily upon the information handling device involved. The Gamma 60 is designed to handle information relevant to any binary coded structure. Thus an 80-column punched card is considered as a 960-bit information item; 12 rows multiplied by 80 columns equals 960 possible punches; is stored as an exact image in 960 magnetic cores of the main memory with 2 card columns occupying one catena. […]
- Blaauw, Gerrit Anne; Brooks Jr., Frederick Phillips; Buchholz, Werner (1962), "4: Natural Data Units" (PDF), in Buchholz, Werner (ed.), Planning a Computer System – Project Stretch, McGraw-Hill Book Company, Inc. / The Maple Press Company, York, PA., pp. 39–40, LCCN 61-10466, archived (PDF) from the original on 2017-04-03, retrieved 2017-04-03,
[…] Terms used here to describe the structure imposed by the machine design, in addition to bit, are listed below.
Byte denotes a group of bits used to encode a character, or the number of bits transmitted in parallel to and from input-output units. A term other than character is used here because a given character may be represented in different applications by more than one code, and different codes may use different numbers of bits (i.e., different byte sizes). In input-output transmission the grouping of bits may be completely arbitrary and have no relation to actual characters. (The term is coined from bite, but respelled to avoid accidental mutation to bit.)
A word consists of the number of data bits transmitted in parallel from or to memory in one memory cycle. Word size is thus defined as a structural property of the memory. (The term catena was coined for this purpose by the designers of the Bull GAMMA 60 computer.)
Block refers to the number of words transmitted to or from an input-output unit in response to a single input-output instruction. Block size is a structural property of an input-output unit; it may have been fixed by the design or left to be varied by the program. […]
- "Terms And Abbreviations". MCS-4 Assembly Language Programming Manual - The INTELLEC 4 Microcomputer System Programming Manual (PDF) (Preliminary ed.). Santa Clara, California, USA: Intel Corporation. December 1973. pp. v, 2-6. MCS-030-1273-1. Archived (PDF) from the original on 2020-03-01. Retrieved 2020-03-02.
[…] Bit - The smallest unit of information which can be represented. (A bit may be in one of two states I 0 or 1). […] Byte - A group of 8 contiguous bits occupying a single memory location. […] Character - A group of 4 contiguous bits of data. […](NB. This Intel 4004 manual uses the term character referring to 4-bit rather than 8-bit data entities. Intel switched to use the more common term nibble for 4-bit entities in their documentation for the succeeding processor 4040 in 1974 already.)
- Davis, Mark (2008-05-05). "Moving to Unicode 5.1". Google Blog. Retrieved 2008-09-28.
- "§1.7 The C++ memory model / §5.3.3 Sizeof". ISO/IEC 14882:2011.
- "<limits.h>". pubs.opengroup.org. Retrieved 2018-04-01.
- "Glossary of Unicode Terms – Code Point". Retrieved 2019-05-14.
- "POSIX definition of Character".
- "POSIX strlen reference".
- "POSIX definition of Character Array".