In linear algebra, the Cholesky decomposition or Cholesky factorization (pronounced /ʃo-LESS-key/) is a decomposition of a Hermitian, positive-definite matrix into the product of a lower triangular matrix and its conjugate transpose, which is useful for efficient numerical solutions, e.g., Monte Carlo simulations. It was discovered by André-Louis Cholesky for real matrices. When it is applicable, the Cholesky decomposition is roughly twice as efficient as the LU decomposition for solving systems of linear equations.
- 1 Statement
- 2 LDL decomposition
- 3 Example
- 4 Applications
- 5 Computation
- 6 Proof for positive semi-definite matrices
- 7 Generalization
- 8 Implementations in programming libraries
- 9 See also
- 10 Notes
- 11 References
- 12 External links
where L is a lower triangular matrix with real and positive diagonal entries, and L* denotes the conjugate transpose of L. Every Hermitian positive-definite matrix (and thus also every real-valued symmetric positive-definite matrix) has a unique Cholesky decomposition.
If the matrix A is Hermitian and positive semi-definite, then it still has a decomposition of the form A = LL* if the diagonal entries of L are allowed to be zero.
The Cholesky decomposition is unique when A is positive definite; there is only one lower triangular matrix L with strictly positive diagonal entries such that A = LL*. However, the decomposition need not be unique when A is positive semidefinite.
The converse holds trivially: if A can be written as LL* for some invertible L, lower triangular or otherwise, then A is Hermitian and positive definite.
A closely related variant of the classical Cholesky decomposition is the LDL decomposition,
This decomposition is related to the classical Cholesky decomposition of the form LL* as follows:
Or, given the classical Cholesky decomposition , the form can be found by using the property that the diagonal of L must be 1 and that both the Cholesky and the form are lower triangles, if S is a diagonal matrix that contains the main diagonal of , then
The LDL variant, if efficiently implemented, requires the same space and computational complexity to construct and use but avoids extracting square roots. Some indefinite matrices for which no Cholesky decomposition exists have an LDL decomposition with negative entries in D. For these reasons, the LDL decomposition may be preferred. For real matrices, the factorization has the form A = LDLT and is often referred to as LDLT decomposition (or LDLT decomposition, or LDL′). It is closely related to the eigendecomposition of real symmetric matrices, A = QΛQT.
Here is the Cholesky decomposition of a symmetric real matrix:
And here is its LDLT decomposition:
The Cholesky decomposition is mainly used for the numerical solution of linear equations . If A is symmetric and positive definite, then we can solve by first computing the Cholesky decomposition , then solving for y by forward substitution, and finally solving for x by back substitution.
An alternative way to eliminate taking square roots in the decomposition is to compute the Cholesky decomposition , then solving for y, and finally solving .
For linear systems that can be put into symmetric form, the Cholesky decomposition (or its LDL variant) is the method of choice, for superior efficiency and numerical stability. Compared to the LU decomposition, it is roughly twice as efficient.
Linear least squares
Systems of the form Ax = b with A symmetric and positive definite arise quite often in applications. For instance, the normal equations in linear least squares problems are of this form. It may also happen that matrix A comes from an energy functional, which must be positive from physical considerations; this happens frequently in the numerical solution of partial differential equations.
Non-linear multi-variate functions may be minimized over their parameters using variants of Newton's method called quasi-Newton methods. At iteration k, the search steps in a direction defined by solving = for , where is the step direction, is the gradient, and is an approximation to the Hessian matrix formed by repeating rank-1 updates at each iteration. Two well-known update formulas are called Davidon–Fletcher–Powell (DFP) and Broyden–Fletcher–Goldfarb–Shanno (BFGS). Loss of the positive-definite condition through round-off error is avoided if rather than updating an approximation to the inverse of the Hessian, one updates the Cholesky decomposition of an approximation of the Hessian matrix itself.
Monte Carlo simulation
The Cholesky decomposition is commonly used in the Monte Carlo method for simulating systems with multiple correlated variables. The covariance matrix is decomposed to give the lower-triangular L. Applying this to a vector of uncorrelated samples u produces a sample vector Lu with the covariance properties of the system being modeled.
The following simplified example shows the economy one gets from the Cholesky decomposition: suppose the goal is to generate two correlated normal variables and with given correlation coefficient . To accomplish that, it is necessary to first generate two uncorrelated Gaussian random variables and , which can be done using a Box–Muller transform. Given the required correlation coefficient , the correlated normal variables can be obtained via the transformations and .
Unscented Kalman filters commonly use the Cholesky decomposition to choose a set of so-called sigma points. The Kalman filter tracks the average state of a system as a vector x of length N and covariance as an N × N matrix P. The matrix P is always positive semi-definite and can be decomposed into LLT. The columns of L can be added and subtracted from the mean x to form a set of 2N vectors called sigma points. These sigma points completely capture the mean and covariance of the system state.
The explicit inverse of a Hermitian matrix can be computed by Cholesky decomposition, in a manner similar to solving linear systems, using operations ( multiplications). The entire inversion can even be efficiently performed in-place.
A non-Hermitian matrix B can also be inverted using the following identity, where BB* will always be Hermitian:
There are various methods for calculating the Cholesky decomposition. The computational complexity of commonly used algorithms is O(n3) in general. The algorithms described below all involve about n3/3 FLOPs (n3/6 multiplications and the same number of additions), where n is the size of the matrix A. Hence, they have half the cost of the LU decomposition, which uses 2n3/3 FLOPs (see Trefethen and Bau 1997).
Which of the algorithms below is faster depends on the details of the implementation. Generally, the first algorithm will be slightly slower because it accesses the data in a less regular manner.
The Cholesky algorithm
The Cholesky algorithm, used to calculate the decomposition matrix L, is a modified version of Gaussian elimination.
The recursive algorithm starts with i := 1 and
- A(1) := A.
At step i, the matrix A(i) has the following form:
where Ii−1 denotes the identity matrix of dimension i − 1.
If we now define the matrix Li by
then we can write A(i) as
Note that bi b*i is an outer product, therefore this algorithm is called the outer-product version in (Golub & Van Loan).
We repeat this for i from 1 to n. After n steps, we get A(n+1) = I. Hence, the lower triangular matrix L we are looking for is calculated as
The Cholesky–Banachiewicz and Cholesky–Crout algorithms
If we write out the equation
we obtain the following:
and therefore the following formulas for the entries of L:
For complex and real matrices, inconsequential arbitrary sign changes of diagonal and associated off-diagonal elements are allowed. The expression under the square root is always positive if A is real and positive-definite.
For complex Hermitian matrix, the following formula applies:
So we can compute the (i, j) entry if we know the entries to the left and above. The computation is usually arranged in either of the following orders:
- The Cholesky–Banachiewicz algorithm starts from the upper left corner of the matrix L and proceeds to calculate the matrix row by row.
- The Cholesky–Crout algorithm starts from the upper left corner of the matrix L and proceeds to calculate the matrix column by column.
Either pattern of access allows the entire computation to be performed in-place if desired.
Stability of the computation
Suppose that we want to solve a well-conditioned system of linear equations. If the LU decomposition is used, then the algorithm is unstable unless we use some sort of pivoting strategy. In the latter case, the error depends on the so-called growth factor of the matrix, which is usually (but not always) small.
Now, suppose that the Cholesky decomposition is applicable. As mentioned above, the algorithm will be twice as fast. Furthermore, no pivoting is necessary, and the error will always be small. Specifically, if we want to solve Ax = b, and y denotes the computed solution, then y solves the perturbed system (A + E)y = b, where
One concern with the Cholesky decomposition to be aware of is the use of square roots. If the matrix being factorized is positive definite as required, the numbers under the square roots are always positive in exact arithmetic. Unfortunately, the numbers can become negative because of round-off errors, in which case the algorithm cannot continue. However, this can only happen if the matrix is very ill-conditioned. One way to address this is to add a diagonal correction matrix to the matrix being decomposed in an attempt to promote the positive-definiteness. While this might lessen the accuracy of the decomposition, it can be very favorable for other reasons; for example, when performing Newton's method in optimization, adding a diagonal matrix can improve stability when far from the optimum.
An alternative form, eliminating the need to take square roots when A is symmetric, is the symmetric indefinite factorization
The following recursive relations apply for the entries of D and L:
This works as long as the generated diagonal elements in D stay non-zero. The decomposition is then unique. D and L are real if A is real.
For complex Hermitian matrix A, the following formula applies:
Again, the pattern of access allows the entire computation to be performed in-place if desired.
When used on indefinite matrices, the LDL* factorization is known to be unstable without careful pivoting; specifically, the elements of the factorization can grow arbitrarily. A possible improvement is to perform the factorization on block sub-matrices, commonly 2 × 2:
where every element in the matrices above is a square submatrix. From this, these analogous recursive relations follow:
This involves matrix products and explicit inversion, thus limiting the practical block size.
Updating the decomposition
A task that often arises in practice is that one needs to update a Cholesky decomposition. In more details, one has already computed the Cholesky decomposition of some matrix , then one changes the matrix in some way into another matrix, say , and one wants to compute the Cholesky decomposition of the updated matrix: . The question is now whether one can use the Cholesky decomposition of that was computed before to compute the Cholesky decomposition of .
The specific case, where the updated matrix is related to the matrix by , is known as a rank-one update.
function [L] = cholupdate(L, x) n = length(x); for k = 1:n r = sqrt(L(k, k)^2 + x(k)^2); c = r / L(k, k); s = x(k) / L(k, k); L(k, k) = r; if k < n L((k+1):n, k) = (L((k+1):n, k) + s * x((k+1):n)) / c; x((k+1):n) = c * x((k+1):n) - s * L((k+1):n, k); end end end
A rank-one downdate is similar to a rank-one update, except that the addition is replaced by subtraction: . This only works if the new matrix is still positive definite.
The code for the rank-one update shown above can easily be adapted to do a rank-one downdate: one merely needs to replace the two additions in the assignment to
L((k+1):n, k) by subtractions.
Adding and removing rows and columns
If we have a symmetric and positive definite matrix represented in block form as
and its upper Cholesky factor
then for a new matrix , which is the same as but with the insertion of new rows and columns,
we are interested in finding the Cholesky factorisation of , which we call , without directly computing the entire decomposition.
Writing for the solution of , which can be found easily for triangular matrices, and for the Cholesky decomposition of , the following relations can be found:
These formulas may be used to determine the Cholesky factor after the insertion of rows or columns in any position, if we set the row and column dimensions appropriately (including to zero). The inverse problem, when we have
with known Cholesky decomposition
and wish to determine the Cholesky factor
of the matrix with rows and columns removed,
yields the following rules:
Notice that the equations above that involve finding the Cholesky decomposition of a new matrix are all of the form , which allows them to be efficiently calculated using the update and downdate procedures detailed in the previous section.
Proof for positive semi-definite matrices
Proof by limiting argument
The above algorithms show that every positive definite matrix has a Cholesky decomposition. This result can be extended to the positive semi-definite case by a limiting argument. The argument is not fully constructive, i.e., it gives no explicit numerical algorithms for computing Cholesky factors.
If is an positive semi-definite matrix, then the sequence consists of positive definite matrices. (This is an immediate consequence of, for example, the spectral mapping theorem for the polynomial functional calculus.) Also,
in operator norm. From the positive definite case, each has Cholesky decomposition . By property of the operator norm,
So is a bounded set in the Banach space of operators, therefore relatively compact (because the underlying vector space is finite-dimensional). Consequently, it has a convergent subsequence, also denoted by , with limit . It can be easily checked that this has the desired properties, i.e. , and is lower triangular with non-negative diagonal entries: for all and ,
Therefore, . Because the underlying vector space is finite-dimensional, all topologies on the space of operators are equivalent. So tends to in norm means tends to entrywise. This in turn implies that, since each is lower triangular with non-negative diagonal entries, is also.
Proof by QR decomposition
Let be a positive semi-definite matrix Hermitian matrix. Then it can be written as a product of its square root matrix, . Now QR decomposition can be applied to , resulting in , where is unitary and is upper triangular. Inserting the decomposition into the original equality yields . Setting completes the proof.
acting on the direct sum
is a bounded operator. If A is positive (semidefinite) in the sense that for all finite k and for any
we have , then there exists a lower triangular operator matrix L such that A = LL*. One can also take the diagonal entries of L to be positive.
Implementations in programming libraries
- C programming language: the GNU Scientific Library provides several implementations of Cholesky decomposition.
- Maxima computer algebra system: function cholesky computes Cholesky decomposition.
- GNU Octave numerical computations system provides several functions to calculate, update, and apply a Cholesky decomposition.
- The LAPACK library provides a high performance implementation of the Cholesky decomposition that can be accessed from Fortran, C and most languages.
- In Python, the function "cholesky" from the numpy.linalg module performs Cholesky decomposition.
- In Matlab and R, the "chol" function gives the Cholesky decomposition..
- In Julia, the "cholesky" function from the LinearAlgebra standard library gives the Cholesky decomposition.
- In Mathematica, the function "CholeskyDecomposition" can be applied to a matrix.
- In C++, the command "chol" from the armadillo library performs Cholesky decomposition. The Eigen library supplies Cholesky factorizations for both sparse and dense matrices.
- In the ROOT package, the TDecompChol class is available.
- In Analytica, the function Decompose gives the Cholesky decomposition.
- The Apache Commons Math library has an implementation which can be used in Java, Scala and any other JVM language.
- Cycle rank
- Incomplete Cholesky factorization
- Matrix decomposition
- Minimum degree algorithm
- Square root of a matrix
- Sylvester's law of inertia
- Symbolic Cholesky decomposition
- Press, William H.; Saul A. Teukolsky; William T. Vetterling; Brian P. Flannery (1992). Numerical Recipes in C: The Art of Scientific Computing (second ed.). Cambridge University England EPress. p. 994. ISBN 0-521-43108-5. Retrieved 2009-01-28.
- Golub & Van Loan (1996, p. 143), Horn & Johnson (1985, p. 407), Trefethen & Bau (1997, p. 174).
- Golub & Van Loan (1996, p. 147).
- Horn & Johnson (1985, p. 407).
- "matrices - Diagonalizing a Complex Symmetric Matrix". MathOverflow. Retrieved 2020-01-25.
- Schabauer, Hannes; Pacher, Christoph; Sunderland, Andrew G.; Gansterer, Wilfried N. (2010-05-01). "Toward a parallel solver for generalized complex symmetric eigenvalue problems". Procedia Computer Science. ICCS 2010. 1 (1): 437–445. doi:10.1016/j.procs.2010.04.047. ISSN 1877-0509.
- – LDLT decomposition from Cholesky decomposition – Cross Validated. Stats.stackexchange.com (2016-04-21). Retrieved on 2016-11-02.
- Krishnamoorthy, Aravindh; Menon, Deepak (2011). "Matrix Inversion Using Cholesky Decomposition". 1111: 4144. arXiv:1111.4144. Bibcode:2011arXiv1111.4144K. Cite journal requires
- Matlab randn documentation. mathworks.com.
- Fang, Haw-ren; O'Leary, Dianne P. (8 August 2006). "Modified Cholesky Algorithms: A Catalog with New Approaches" (PDF). Cite journal requires
- Watkins, D. (1991). Fundamentals of Matrix Computations. New York: Wiley. p. 84. ISBN 0-471-61414-9.
- Nocedal, Jorge (2000). Numerical Optimization. Springer.
- Fang, Haw-ren (24 August 2007). "Analysis of Block LDLT Factorizations for Symmetric Indefinite Matrices". Cite journal requires
- Based on: Stewart, G. W. (1998). Basic decompositions. Philadelphia: Soc. for Industrial and Applied Mathematics. ISBN 0-89871-414-1.
- Osborne, M. (2010), Appendix B.
- Dereniowski, Dariusz; Kubale, Marek (2004). "Cholesky Factorization of Matrices in Parallel and Ranking of Graphs". 5th International Conference on Parallel Processing and Applied Mathematics (PDF). Lecture Notes on Computer Science. 3019. Springer-Verlag. pp. 985–992. doi:10.1007/978-3-540-24669-5_127. ISBN 978-3-540-21946-0. Archived from the original (PDF) on 2011-07-16.
- Golub, Gene H.; Van Loan, Charles F. (1996). Matrix Computations (3rd ed.). Baltimore: Johns Hopkins. ISBN 978-0-8018-5414-9.
- Horn, Roger A.; Johnson, Charles R. (1985). Matrix Analysis. Cambridge University Press. ISBN 0-521-38632-2.
- S. J. Julier and J. K. Uhlmann. "A General Method for Approximating Nonlinear Transformations of ProbabilityDistributions".
- S. J. Julier and J. K. Uhlmann, "A new extension of the Kalman filter to nonlinear systems", in Proc. AeroSense: 11th Int. Symp. Aerospace/Defence Sensing, Simulation and Controls, 1997, pp. 182–193.
- Trefethen, Lloyd N.; Bau, David (1997). Numerical linear algebra. Philadelphia: Society for Industrial and Applied Mathematics. ISBN 978-0-89871-361-9.
- Osborne, Michael (2010). Bayesian Gaussian Processes for Sequential Prediction, Optimisation and Quadrature (PDF) (thesis). University of Oxford.
History of science
- Sur la résolution numérique des systèmes d'équations linéaires, Cholesky's 1910 manuscript, online and analyzed on BibNum (in French and English) [for English, click 'A télécharger']
- Hazewinkel, Michiel, ed. (2001) , "Cholesky factorization", Encyclopedia of Mathematics, Springer Science+Business Media B.V. / Kluwer Academic Publishers, ISBN 978-1-55608-010-4
- "Cholesky Decomposition". PlanetMath.
- Cholesky Decomposition, The Data Analysis BriefBook
- Cholesky Decomposition on www.math-linux.com
- Cholesky Decomposition Made Simple on Science Meanderthal
- LAPACK is a collection of FORTRAN subroutines for solving dense linear algebra problems
- ALGLIB includes a partial port of the LAPACK to C++, C#, Delphi, Visual Basic, etc.
- libflame is a C library with LAPACK functionality.
- Notes and video on high-performance implementation of Cholesky factorization at The University of Texas at Austin.
- Cholesky : TBB + Threads + SSE is a book explaining the implementation of the CF with TBB, threads and SSE (in Spanish).
- library "Ceres Solver" by Google.
- LDL decomposition routines in Matlab.
- Armadillo is a C++ linear algebra package
Use of the matrix in simulation
- Online Matrix Calculator Performs Cholesky decomposition of matrices online.