Color depth or colour depth (see spelling differences), also known as bit depth, is either the number of bits used to indicate the color of a single pixel, in a bitmapped image or video framebuffer, or the number of bits used for each color component of a single pixel. For consumer video standards, the bit depth specifies the number of bits used for each color component. When referring to a pixel, the concept can be defined as bits per pixel (bpp). When referring to a color component, the concept can be defined as bits per component, bits per channel, bits per color (all three abbreviated bpc), and also bits per pixel component, bits per color channel or bits per sample (bps).
Color depth is only one aspect of color representation, expressing the precision with which the amount of each primary can be expressed; the other aspect is how broad a range of colors can be expressed (the gamut). The definition of both color precision and gamut is accomplished with a color encoding specification which assigns a digital code value to a location in a color space.
8 bit.png 256 colors
37 KB (−62%)
4 bit.png 16 colors
13 KB (−87%)
2 bit.png 4 colors
6 KB (−94%)
1 bit.png 2 colors
4 KB (−96%)
With the relatively low color depth, the stored value is typically a number representing the index into a color map or palette (a form of vector quantization). The colors available in the palette itself may be fixed by the hardware or modifiable by software. Modifiable palettes are sometimes referred to as pseudocolor palettes.
Old graphics chips, particularly those used in home computers and video game consoles, often have the ability to use a different palette per sprites and tiles in order to increase the maximum number of simultaneously displayed colors, while minimizing use of then-expensive memory (and bandwidth). For example, in the ZX Spectrum the picture is stored in a two-color format, but these two colors can be separately defined for each rectangular block of 8×8 pixels.
The palette itself has a color depth (number of bits per entry). While the best VGA systems only offered an 18-bit (262,144 color) palette from which colors could be chosen, all color Macintosh video hardware offered a 24-bit (16 million color) palette. 24-bit palettes are pretty much universal on any recent hardware or file format using them.
If instead the color can be directly figured out from the pixel values, it is "direct color". Palettes were rarely used for depths greater than 12 bits per pixel, as the memory consumed by the palette would exceed the necessary memory for direct color on every pixel.
List of common depths
2 colors, often black and white (or whatever color the CRT phosphor was) direct color. Sometimes 1 meant black and 0 meant white, the inverse of modern standards. Most of the first graphics displays were of this type, the X window system was developed for such displays, and this was assumed for a 3M computer. The first Macintoshes, Atari ST high resolution. In the late 80's there were professional displays with resolutions up to 300dpi (the same as a contemporary laser printer) but color proved more popular.
16 colors, usually from a selection of fixed palettes. Used by the EGA and by the least common denominator VGA standard at higher resolution, color Macintoshes, Atari ST low resolution, Commodore 64, Amstrad CPC.
32 colors from a programmable palette, used by the Original Amiga chipset.
256 colors, usually from a fully-programmable palette. Most early color Unix workstations, VGA at low resolution, Super VGA, color Macintoshes, Atari TT, Amiga AGA chipset, Falcon030, Acorn Archimedes. Both X and Windows provided elaborate systems to try to allow each program to select its own palette, often resulting in incorrect colors in any window other than the one with focus.
Some systems placed a color cube in the palette for a direct-color system (and so all programs would use the same palette). Usually fewer levels of blue were provided than others, as the normal human eye is less sensitive to the blue component than to the red or green (two thirds of the eye's receptors process the longer wavelengths) Popular sizes were:
- 6×6×6 (web-safe colors), leaving 40 colors for a gray ramp or programmable palette entries.
- 8×8×4. 3 bits of R and G, 2 bits of B, the correct value can be computed from a color without using multiplication. Used, among others, in the MSX2 system series of computers in the early to mid 1990s.
- a 6×7×6 cube, leaving 4 colors for a programmable palette or grays.
- a 6×8×5 cube, leaving 16 colors for a programmable palette or grays.
High color (15/16-bit)
In high-color systems, two bytes (16 bits) are stored for each pixel. Most often, each component (R, G, and B) is assigned five bits, plus one unused bit (or used for a mask channel or to switch to indexed color); this allows 32,768 colors to be represented. However, an alternate assignment which reassigns the unused bit to the G channel allows 65,536 colors to be represented, but without transparency. These color depths are sometimes used in small devices with a color display, such as mobile phones, and are sometimes considered sufficient to display photographic images. Occasionally 4 bits per color are used plus 4 bits for alpha, giving 4096 colors.
The term "high color" has recently been used to mean color depths greater than 24 bits.
Almost all of the least expensive LCDs (such as typical twisted nematic types) provide 18-bit color (64×64×64 = 262,144 combinations) to achieve faster color transition times, and use either dithering or frame rate control to approximate 24-bit-per-pixel true color, or throw away 6 bits of color information entirely. More expensive LCDs (typically IPS) can display 24-bit color depth or greater.
True color (24-bit)
24 bits almost always use 8 bits each of R, G, and B. As of 2018, 24-bit color depth is used by virtually every computer and phone display and the vast majority of image storage formats. Almost all cases of 32 bits per pixel assigns 24 bits to the color, and the remaining 8 are the alpha channel or unused.
224 gives 16,777,216 color variations. The human eye can discriminate up to ten million colors and since the gamut of a display is smaller than the range of human vision, this means this should cover that range with more detail than can be perceived. However, displays do not evenly distribute the colors in human perception space, so humans can see the changes between some adjacent colors as color banding. Monochromatic images set all three channels to the same value, resulting in only 256 different colors and thus, potentially, more visible banding, as the average human eye can only distinguish between about 30 shades of gray. Some software attempts to dither the gray level into the color channels to increase this, although in modern software this is more often used for subpixel rendering to increase the space resolution on LCD screens where the colors have slightly different positions.
Macintosh systems refer to 24-bit color as "millions of colors". The term true color is sometimes used to mean what this article is calling direct color. It is also often used to refer to all color depths greater or equal to 24.
Deep color (30-bit)
Deep color consists of a billion or more colors. 230 is approximately 1.073 billion. Usually this is 10 bits each of red, green, and blue. If an alpha channel of the same size is added then each pixel takes 40 bits.
Some earlier systems placed three 10-bit channels in a 32-bit word, with 2 bits unused (or used as a 4-level alpha channel); the Cineon file format, for example, used this. Some SGI systems had 10- (or more) bit digital-to-analog converters for the video signal and could be set up to interpret data stored this way for display. BMP files define this as one of its formats, and it is called "HiColor" by Microsoft.
Video cards with 10 bits per component started coming to market in the late 1990s. An early example was the Radius ThunderPower card for the Macintosh, which included extensions for QuickDraw and Adobe Photoshop plugins to support editing 30-bit images. Some vendors call their 24-bit color depth with FRC panels 30-bit panels; however, true deep color displays have 10-bit or more color depth without FRC.
The HDMI 1.3 specification defines a bit depth of 30 bits (as well as 36 and 48 bit depths). In that regard, the Nvidia Quadro graphics cards manufactured after 2006 support 30-bit deep color and Pascal or later GeForce and Titan cards when paired with the Studio Driver as do some models of the Radeon HD 5900 series such as the HD 5970. The ATI FireGL V7350 graphics card supports 40- and 64-bit pixels (30 and 48 bit color depth with an alpha channel).
The DisplayPort specification also supports color depths greater than 24 bpp in version 1.3 through "VESA Display Stream Compression, which uses a visually lossless low-latency algorithm based on predictive DPCM and YCoCg-R color space and allows increased resolutions and color depths and reduced power consumption."
High Efficiency Video Coding (HEVC or H.265) defines the Main 10 profile, which allows for 8 or 10 bits per sample with 4:2:0 chroma subsampling. The Main 10 profile was added at the October 2012 HEVC meeting based on proposal JCTVC-K0109 which proposed that a 10-bit profile be added to HEVC for consumer applications. The proposal stated that this was to allow for improved video quality and to support the Rec. 2020 color space that will be used by UHDTV. The second version of HEVC has five profiles that allow for a bit depth of 8 bits to 16 bits per sample.
As of 2020, some smartphones have started using 30-bit color depth, such as the OnePlus 8 Pro, Oppo Find X2 & Find X2 Pro, Sony Xperia 1 II, Xiaomi Mi 10 Ultra, Motorola Edge+, ROG Phone 3 and Sharp Aquos Zero 2.
Using 12 bits per color channel produces 36 bits, approximately 68.71 billion colors. If an alpha channel of the same size is added then there are 48 bits per pixel.
Using 16 bits per color channel produces 48 bits, approximately 281.5 trillion colors. If an alpha channel of the same size is added then there are 64 bits per pixel.
Image editing software such as Photoshop started using 16 bits per channel fairly early in order to reduce the quantization on intermediate results (i.e. if an operation is divided by 4 and then multiplied by 4, it would lose the bottom 2 bits of 8-bit data, but if 16 bits were used it would lose none of the 8-bit data). In addition, digital cameras were able to produce 10 or 12 bits per channel in their raw data; as 16 bits is the smallest addressable unit larger than that, using it would allow the raw data to be manipulated.
High dynamic range and wide gamut
Some systems started using those bits for numbers outside the 0–1 range rather than for increasing the resolution. Numbers greater than 1 were for colors brighter than the display could show, as in high-dynamic-range imaging (HDRI). Negative numbers can increase the gamut to cover all possible colors, and for storing the results of filtering operations with negative filter coefficients. The Pixar Image Computer used 12 bits to store numbers in the range [-1.5,2.5), with 2 bits for the integer portion and 10 for the fraction. The Cineon imaging system used 10-bit professional video displays with the video hardware adjusted so that a value of 95 was black and 685 was white. The amplified signal tended to reduce the lifetime of the CRT.
Linear color space and floating point
More bits also encouraged the storage of light as linear values, where the number directly corresponds to the amount of light emitted. Linear levels makes calculation of light (in the context of computer graphics) much easier. However, linear color results in disproportionately more samples near white and fewer near black, so the quality of 16-bit linear is about equal to 12-bit sRGB.
Floating point numbers can represent linear light levels spacing the samples semi-logarithmically. Floating point representations also allow for drastically larger dynamic ranges as well as negative values. Most systems first supported 32-bit per channel single-precision, which far exceeded the accuracy required for most applications. In 1999, Industrial Light & Magic released the open standard image file format OpenEXR which supported 16-bit-per-channel half-precision floating-point numbers. At values near 1.0, half precision floating point values have only the precision of an 11-bit integer value, leading some graphics professionals to reject half-precision in situations where the extended dynamic range is not needed.
More than three primaries
Virtually all television displays and computer displays form images by varying the strength of just three primary colors: red, green, and blue. For example, bright yellow is formed by roughly equal red and green contributions, with no blue contribution.
Additional color primaries can widen the color gamut of a display, since it is no longer limited to the shape of a triangle in the CIE 1931 color space. Recent technologies such as Texas Instruments's BrilliantColor augment the typical red, green, and blue channels with up to three other primaries: cyan, magenta and yellow. Mitsubishi and Samsung, among others, use this technology in some TV sets to extend the range of displayable colors. The Sharp Aquos line of televisions has introduced Quattron technology, which augments the usual RGB pixel components with a yellow subpixel. However, formats and media supporting these extended color primaries are extremely uncommon.
For storing and working on images, it is possible to use "imaginary" primary colors that are not physically possible so that the triangle does enclose a much larger gamut, so whether more than three primaries results in a difference to the human eye is not yet proven, since humans are primarily trichromats, though tetrachromats exist.
- Audio bit depth – corresponding concept for digital audio
- Bit plane
- Image resolution
- List of color palettes
- List of colors (compact)
- Mach banding
- RGB color model
- G.J. Sullivan; J.-R. Ohm; W.-J. Han; T. Wiegand (May 25, 2012). "Overview of the High Efficiency Video Coding (HEVC) Standard" (PDF). IEEE Transactions on Circuits and Systems for Video Technology. Retrieved May 18, 2013.
- G.J. Sullivan; Heiko Schwarz; Thiow Keng Tan; Thomas Wiegand (August 22, 2012). "Comparison of the Coding Efficiency of Video Coding Standards – Including High Efficiency Video Coding (HEVC)" (PDF). IEEE Trans. on Circuits and Systems for Video Technology. Retrieved May 18, 2013.
- "High Efficiency Video Coding (HEVC) text specification draft 10 (for FDIS & Consent)". JCT-VC. January 17, 2013. Retrieved May 18, 2013.
- Alberto Dueñas; Adam Malamy (October 18, 2012). "On a 10-bit consumer-oriented profile in High Efficiency Video Coding (HEVC)". JCT-VC. Retrieved May 18, 2013.
- "After Effects / Color basics". Adobe Systems. Retrieved July 14, 2013.
- Thenkabail, P. (2018). Remote Sensing Handbook - Three Volume Set. Remote Sensing Handbook. CRC Press. p. 20. ISBN 978-1-4822-8267-2. Retrieved August 27, 2020.
- Pantone, How we see color
- Edward M. Schwalb (2003). iTV handbook: technologies and standards. Prentice Hall PTR. p. 138. ISBN 978-0-13-100312-5.
- David A. Karp (1998). Windows 98 annoyances. O'Reilly Media. p. 156. ISBN 978-1-56592-417-8.
- Kowaliski, Cyril; Gasior, Geoff; Wasson, Scott (July 2, 2012). "TR's Summer 2012 system guide". The Tech Report. p. 14. Retrieved January 19, 2013.
- D. B. Judd and G. Wyszecki (1975). Color in Business, Science and Industry. Wiley Series in Pure and Applied Optics (third ed.). New York: Wiley-Interscience. p. 388. ISBN 0-471-45212-2.
- "Humans Can Only Distinguish Between About 30 Shades Of Gray". Popular Science. Retrieved December 10, 2019.
- Clint DeBoer (April 16, 2008). "HDMI Enhanced Black Levels, xvYCC and RGB". Audioholics. Retrieved June 2, 2013.
- "Digital Color Coding" (PDF). Telairity. Archived from the original (PDF) on January 7, 2014. Retrieved June 2, 2013.
- Charles A. Poynton (2003). Digital Video and HDTV. Morgan Kaufmann. p. 36. ISBN 1-55860-792-7.
- Keith Jack (2007). Video demystified: a handbook for the digital engineer (5th ed.). Newnes. p. 168. ISBN 978-0-7506-8395-1.
- "Radius Ships ThunderPower 30/1920 Graphics Card Capable of Super Resolution 1920 × 1080 and Billions of Colors". Business Wire. August 5, 1996.
- "HDMI Specification 1.3a Section 6.7.2". HDMI Licensing, LLC. November 10, 2006. Archived from the original on July 10, 2009. Retrieved April 9, 2009.
- "Chapter 32. Configuring Depth 30 Displays (driver release notes)". NVIDIA.
- "NVIDIA Studio Driver 431.70 (Release Highlights)". NVIDIA.
- "ATI Radeon HD 5970 Graphics Feature Summary". AMD. Retrieved March 31, 2010.
- "AMD's 10-bit Video Output Technology" (PDF). AMD. Archived from the original (PDF) on February 16, 2010. Retrieved March 31, 2010.
- Smith, Tony (March 20, 2006). "ATI unwraps first 1GB graphics card". Archived from the original on October 8, 2006. Retrieved October 3, 2006.
- "Looking for a HDMI 2.0 displayport to displayport for my monitor - [Solved] - Displays". Tom's Hardware. Retrieved March 20, 2018.
- "WinHEC 2008 GRA-583: Display Technologies". Microsoft. November 6, 2008. Archived from the original on December 27, 2008. Retrieved December 4, 2008.
- "Windows 7 High Color Support". Softpedia. November 26, 2008. Retrieved December 5, 2008.
- Carl Furgusson (June 11, 2013). "Focus on...HEVC: The background behind the game-changing standard- Ericsson". Ericsson. Archived from the original on June 20, 2013. Retrieved June 21, 2013.
- Simon Forrest (June 20, 2013). "The emergence of HEVC and 10-bit colour formats". Imagination Technologies. Archived from the original on September 15, 2013. Retrieved June 21, 2013.
- Jill Boyce; Jianle Chen; Ying Chen; David Flynn; Miska M. Hannuksela; Matteo Naccari; Chris Rosewarne; Karl Sharman; Joel Sole; Gary J. Sullivan; Teruhiko Suzuki; Gerhard Tech; Ye-Kui Wang; Krzysztof Wegner; Yan Ye (July 11, 2014). "Draft high efficiency video coding (HEVC) version 2, combined format range extensions (RExt), scalability (SHVC), and multi-view (MV-HEVC) extensions". JCT-VC. Retrieved July 11, 2014.
- "8-bit vs. 10-bit Color Space" (PDF). January 2010.
- Hutchison, David (April 5, 2006). "Wider color gamuts on DLP display systems through BrilliantColor technology". Digital TV DesignLine. Archived from the original on September 28, 2007. Retrieved August 16, 2007.
- "Is Tetrachromacy Real? Definition, Causes, Test, and More". Healthline. Retrieved October 4, 2019.