Computer form factor
In computing, the form factor is the specification of a motherboard – the dimensions, power supply type, location of mounting holes, number of ports on the back panel, etc. Specifically, in the IBM PC compatible industry, standard form factors ensure that parts are interchangeable across competing vendors and generations of technology, while in enterprise computing, form factors ensure that server modules fit into existing rackmount systems. Traditionally, the most significant specification is for that of the motherboard, which generally dictates the overall size of the case. Small form factors have been developed and implemented.
Overview of form factors
- To serve as a central backbone to which all other modular parts such as CPU, RAM, and hard drives can be attached as required to create a computer
- To be interchangeable (in most cases) with different components (in particular CPU and expansion cards) for the purposes of customization and upgrading
- To distribute power to other circuit boards
- To electronically co-ordinate and interface the operation of the components
As new generations of components have been developed, the standards of motherboards have changed too. For example, the introduction of AGP and, more recently, PCI Express have influenced motherboard design. However, the standardized size and layout of motherboards have changed much more slowly and are controlled by their own standards. The list of components required on a motherboard changes far more slowly than the components themselves. For example, north bridge microchips have changed many times since their introduction with many manufacturers bringing out their own versions, but in terms of form factor standards, provisions for north bridges have remained fairly static for many years.
Although it is a slower process, form factors do evolve regularly in response to changing demands. IBM's long-standing standard, AT (Advanced Technology), was superseded in 1995 by the current industry standard ATX (Advanced Technology Extended), which still governs the size and design of the motherboard in most modern PCs. The latest update to the ATX standard was released in 2007. A divergent standard by chipset manufacturer VIA called EPIA (also known as ITX, and not to be confused with EPIC) is based upon smaller form factors and its own standards.
Differences between form factors are most apparent in terms of their intended market sector, and involve variations in size, design compromises and typical features. Most modern computers have very similar requirements, so form factor differences tend to be based upon subsets and supersets of these. For example, a desktop computer may require more sockets for maximum flexibility and many optional connectors and other features on board, whereas a computer to be used in a multimedia system may need to be optimized for heat and size, with additional plug-in cards being less common. The smallest motherboards may sacrifice CPU flexibility in favor of a fixed manufacturer's choice.
|Form factor||Originated||Max. size[info 1]
width × depth
(typical usage, Market adoption, etc.)
|XT||IBM 1983||8.5 × 11 in
216 × 279 mm
|Obsolete, see Industry Standard Architecture. The IBM Personal Computer XT was the successor to the original IBM PC, its first home computer. As the specifications were open, many clone motherboards were produced and it became a de facto standard.|
|AT (Advanced Technology)||IBM 1984||12 × 11–13 in
305 × 279–330 mm
|Obsolete, see Industry Standard Architecture. Created by IBM for the IBM Personal Computer/AT, an Intel 80286 machine. Also known as Full AT, it was popular during the era of the Intel 80386 microprocessor. Superseded by ATX.|
|Baby-AT||IBM 1985||8.5 × 10–13 in
216 × 254–330 mm
|IBM's 1985 successor to the AT motherboard. Functionally equivalent to the AT, it became popular due to its significantly smaller size.|
|ATX||Intel 1996||12 × 9.6 in
305 × 244 mm
|Created by Intel in 1995. As of 2017[update], it is the most popular form factor for commodity motherboards. Typical size is 9.6 × 12 in although some companies extend that to 10 × 12 in.|
|SSI CEB||SSI||12 × 10.5 in
305 × 267 mm
|Created by the Server System Infrastructure (SSI) forum. Derived from the EEB and ATX specifications. This means that SSI CEB motherboards have the same mounting holes and the same IO connector area as ATX motherboards.|
|SSI EEB||SSI||12 × 13 in
305 × 330 mm
|Created by the Server System Infrastructure (SSI) forum. Derived from the EEB and ATX specifications. This means that SSI CEB motherboards have the same mounting holes and the same IO connector area as ATX motherboards, but SSI EEB motherboards do not.|
|SSI MEB||SSI||16.2 × 13 in
411 × 330 mm
|Created by the Server System Infrastructure (SSI) forum. Derived from the EEB and ATX specifications.|
|microATX||1996||9.6 × 9.6 in
244 × 244 mm
|A smaller variant of the ATX form factor (about 25% shorter). Compatible with most ATX cases, but has fewer slots than ATX, for a smaller power supply unit. Very popular for desktop and small form factor computers as of 2017[update].|
|Mini-ATX||AOpen 2005||5.9 × 5.9 in
150 × 150 mm
|Mini-ATX is considerably smaller than Micro-ATX. Mini-ATX motherboards were designed with MoDT (Mobile on Desktop Technology) which adapt mobile CPUs for lower power requirement, less heat generation and better application capability.|
|FlexATX||Intel 1999||9.0 × 7.5 in
228.6 × 190.5 mm max.
|A subset of microATX developed by Intel in 1999. Allows more flexible motherboard design, component positioning and shape. Can be smaller than regular microATX.|
|Mini-ITX||VIA 2001||6.7 × 6.7 in
170 × 170 mm max.
|A small, highly integrated form factor, designed for small devices such as thin clients and set-top boxes.|
|Nano-ITX||VIA 2003||4.7 × 4.7 in
120 × 120 mm
|Targeted at smart digital entertainment devices such as PVRs, set-top boxes, media centers and Car PCs, and thin devices.|
|Pico-ITX||VIA 2007||3.9 × 2.8 in
100 × 72 mm max.
|Mobile-ITX||VIA 2007||2.953 × 1.772 in
75 × 45 mm
|Neo-ITX||VIA 2012||170 × 85 × 35 mm||Used in the VIA Android PC|
|BTX (Balanced Technology Extended)||Intel 2004||12.8 × 10.5 in
325 × 267 mm max.
|A standard proposed by Intel as a successor to ATX in the early 2000s, according to Intel the layout has better cooling. BTX Boards are flipped in comparison to ATX Boards, so a BTX or MicroBTX Board needs a BTX case, while an ATX style board fits in an ATX case. The RAM slots and the PCI slots are parallel to each other.
Processor is placed closest to the fan. May contain a CNR board.
|MicroBTX (or uBTX)||Intel 2004||10.4 × 10.5 in
264 × 267 mm max.
|PicoBTX||Intel 2004||8.0 × 10.5 in
203 × 267 mm max.
|DTX||AMD 2007||200 × 244 mm max.|
|Mini-DTX||AMD 2007||200 × 170 mm max.|
|smartModule||Digital-Logic||66 × 85 mm||Used in embedded systems and single board computers. Requires a baseboard.|
|ETX||Kontron||95 × 114 mm||Used in embedded systems and single board computers. Requires a baseboard.|
|COM Express Basic||PICMG||95 × 125 mm||Used in embedded systems and single board computers. Requires a carrier board. Formerly referred to as ETXexpress by Kontron.|
|COM Express Compact||PICMG||95 × 95 mm||Used in embedded systems and single board computers. Requires a carrier board. Formerly referred to as microETXexpress by Kontron.|
|EOMA68||Luke Kenneth Casson Leighton||85.6 × 54 mm||A general-purpose "eco-conscious" mass-volume standard based around re-use of legacy PCMCIA. Has two variants: Type I (3.3mm high) and Type II (5.0mm high). Does not require a carrier board if the user-facing end provides power.|
|COM Express Mini||PICMG||55 × 84 mm||Used in embedded systems and single board computers. Requires a carrier board. Formerly referred to as nanoETXexpress by Kontron. Also known as COM Express Ultra and adheres to pin-outs Type 1 or Type 10|
|CoreExpress||SFF-SIG||58 × 65 mm||Used in embedded systems and single board computers. Requires a carrier board.|
|Extended ATX (EATX)||Unknown||12 × 13 in
305 × 330 mm
|Used in rackmount server systems. Typically used for server-class type motherboards with dual processors and too much circuitry for a standard ATX motherboard. The mounting hole pattern for the upper portion of the board matches ATX.|
|Enhanced Extended ATX (EEATX)||Supermicro||13.68 × 13 in
347 × 330 mm
|Used in rackmount server systems. Typically used for server-class type motherboards with dual processors and too much circuitry for a standard E.ATX motherboard.|
|LPX||Unknown||9 × 11–13 in
229 × 279–330 mm
|Based on a design by Western Digital, it allowed smaller cases than the AT standard, by putting the expansion card slots on a Riser card. Used in slimline retail PCs. LPX was never standardized and generally only used by large OEMs.|
|Mini-LPX||Unknown||8–9 × 10–11 in
203–229 × 254–279 mm
|Used in slimline retail PCs.|
|PC/104||PC/104 Consortium 1992||3.8 × 3.6 in||Used in embedded systems. AT Bus (ISA) architecture adapted to vibration-tolerant header connectors.|
|PC/104-Plus||PC/104 Consortium 1997||3.8 × 3.6 in||Used in embedded systems. PCI Bus architecture adapted to vibration-tolerant header connectors.|
|PCI/104-Express||PC/104 Consortium 2008||3.8 × 3.6 in||Used in embedded systems.
PCI Express architecture adapted to vibration-tolerant header connectors.
|PCIe/104||PC/104 Consortium 2008||3.8 × 3.6 in||Used in embedded systems.
PCI/104-Express without the legacy PCI bus.
|NLX||Intel 1999||8–9 × 10–13.6 in
203–229 × 254–345 mm
|A low-profile design released in 1997. It also incorporated a riser for expansion cards, and never became popular.|
|UTX||TQ-Components 2001||88 × 108 mm||Used in embedded systems and IPCs. Requires a baseboard.|
|WTX||Intel 1998||14 × 16.75 in
355.6 × 425.4 mm
|A large design for servers and high-end workstations featuring multiple CPUs and hard drives.|
|SWTX||Unknown||16.48 × 13 in
418 × 330 mm
|A proprietary design for servers and high-end workstations featuring multiple CPUs.|
|HPTX||EVGA 2008||13.6 × 15 in
345.44 × 381 mm
|A large design by EVGA currently featured on two motherboards; the eVGA SR2 and SRX. Intended for use with multiple CPUs. Cases require 9 expansion slots to contain this form-factor.|
|XTX||2005||95 × 114 mm||Used in embedded systems. Requires a baseboard.|
- For boards which take expansion slots, the length of the expansion card aligns with the depth of the system board. The case may support cards longer than the depth of the mainboard.
Maximum number of expansion card slots
ATX case compatible:
|ATX/EATX/SSI EEB/SSI CEB||7|
Visual examples of different form factors
PC/104 and EBX
PC/104 is an embedded computer standard which defines both a form factor and computer bus. PC/104 is intended for embedded computing environments. Single board computers built to this form factor are often sold by COTS vendors, which benefits users who want a customized rugged system, without months of design and paper work.
The 5.75 × 8.0 in Embedded Board eXpandable (EBX) specification, which was derived from Ampro's proprietary Little Board form-factor, resulted from a collaboration between Ampro and Motorola Computer Group.
As compared with PC/104 modules, these larger (but still reasonably embeddable) SBCs tend to have everything of a full PC on them, including application oriented interfaces like audio, analog, or digital I/O in many cases. Also it's much easier to fit Pentium CPUs, whereas it's a tight squeeze (or expensive) to do so on a PC/104 SBC. Typically, EBX SBCs contain: the CPU; upgradeable RAM subassemblies (e.g., DIMM); Flash memory for solid state disk; multiple USB, serial, and parallel ports; onboard expansion via a PC/104 module stack; off-board expansion via ISA and/or PCI buses (from the PC/104 connectors); networking interface (typically Ethernet); and video (typically CRT, LCD, and TV).
- "Atom module shrinks to nano size".
- "Form Factors Rev 1.3 :: NLX" Motherboards.org
- "PC/104 Embedded Consortium's History". Archived from the original on 2008-02-11. Retrieved 2008-01-29.
- Angel, Jonathan (2010-02-01). "Open standard defines tiny expansion modules". LinuxDevices.com. Retrieved 2014-03-18.