An infant bed (commonly called a cot in British English, and, in American English, a crib or cradle, or far less commonly, stock) is a small bed especially for infants and very young children. Infant beds are a historically recent development intended to contain a child capable of standing. The cage-like design of infant beds restricts the child to the bed. Around two or three years of age, children are able to climb out and are moved to a toddler bed to prevent an injurious fall while escaping the bed.
The name crib was used to describe a slatted, high-sided child's bed. It derives from the Old English word cribb which means manger (food trough, referring to the shape of a bassinette) or stall (implying coralling the child).
It wasn't until the 19th century that infant beds developed from bassinettes, acquiring a role of keeping the child in their bed. The development of a distinction between infant beds and bassinettes was natural because it was "considered vital that the child's bed be raised off the ground." This was due to a perception of noxious fumes below knee level, and explosive vapours near the ceiling, with good air in between. Once children's beds were raised off the ground the role of the sides changed from a convenience to a safety feature.
It was recognised that once children learn to stand they may be able to get out of a bed with low sides. According to an expert of the time, infant beds were used once the child was 12 months old. Often one side was hinged to open the enclosure, a function fulfilled in modern infant beds with a dropside. With the hinge side lowered, the bed could be moved on casters, and they could be moved right up to the carer's bed when needed.
Iron beds were developed in 17th century Italy to address concerns about bed bug infestation and moths. This new application was quickly extended to children's beds - a rockable iron bassinette (with spear-like corner posts) has been dated to 1620-1640. Proponents promoted the supposed health benefits of iron beds. Infant beds constructed from metal became popular during the later half of the 19th century. Infant beds (and bassinettes) constructed from iron with mesh or chain sides were common. Childcare experts gave iron beds their approval because it was hygienic material (compared with wood) and could not "habour vermin", of which bed bug infestation, lice and moths were cited concerns. Commonly painted with a white vitreous enamel, later manufacturers working with wood continued to paint in the now traditional white; unfortunately this was often lead paint, and children were notorious for chewing and sucking the sweet surface.
As an example of improving safety of infant bed designs, the U.S. Consumer Product Safety Commission has set standards for infant beds sold since 1973. Since this time U.S. annual deaths attributed to infant beds reducing from approximately 200 to approximately 50, and injury rates now at approximately 8,000 per year. Many of these injuries are attributed to the 25 million infant beds manufactured prior to the progressively refined safety standards, yet still in use.
Infant beds are designed to restrict the baby to the bed. The sides are too high for a baby to climb and provide no footholds. Technical standards for infant beds include considerations such as the materials used and preventing hand and head entrapment. Standards for infant beds have been specified in Australia and New Zealand, Europe, the United States and internationally. Design standards all identify and address four broad hazards:
- To prevent injuries such as concussion and bone fractures from falls when trying to climb out, footholds are not permitted. Minimum cot side heights are defined for various mattress positions.
- Infants can become trapped and strangled if their clothing gets caught on parts of a cot that stick out, or if their head becomes trapped between gaps. Neither gaps large enough for a child's head nor protrusions are permitted.
- Babies lack the motor skills or strength to turn their heads should they roll into something that obstructs their breathing. They can become trapped and suffocate if they fall into gaps created by ill-fitting or additional mattresses. Babies can also suffocate if the mattress is too soft.
- Infants can suffer injuries to their arms and legs if they become trapped between gaps. Gaps small enough for a limb to become trapped are not permitted.
Some older cribs contained a drop gate (or drop side), a side which lowers to ease the process of putting the child into the bed, but can be raised again to restore the integrity of the enclosure. However, assembly problems and malfunctioning hardware on drop gates can cause the formation of gaps, which have been attributed to infant deaths and other major injuries. In June 2011, the United States implemented new safety standards requiring all infant beds manufactured and sold in the country to have fixed sides. In June 2016, Canada implemented a similar ban on the sale, importation, or distribution of any infant bed containing drop sides effective December 29, 2016.
Infant beds can be stationary or portable (portacots, portacribs or folding infant beds). In their portable form the beds generally don't feature a dropside, and portability factors are emphasised. Portacots are often made from plastics, are often smaller and fold into a compact package. Rather than bars, they will have breathable mesh sides with an aperture too small for any finger to fit into (less than 5mm by the standards). Standards for folding infant beds exist for Australia and New Zealand, Europe and international (adopted by various organisations including the American National Standards Institute).
Convertible cribs or convertible cots that can be converted into a standard sized bed as the child grows larger have become increasingly popular due to a longer useful life for the furniture. By removing both sides it becomes a toddler bed with unusually high head and foot boards, or removing just one side it becomes a daybed.
Although in the U.S. there is a standard size for an infant bed (~71 cm x ~133 cm), 12% of the 2.4 million infant beds sold annually are not of this size; "mini cribs" are an example of this. Larger infant beds are manufactured, generally for hospital use or for those with special needs. They may include a top, generally made of plastic or metal, to prevent a child from climbing out.
An infant bed is typically used after it is no longer safe to leave the baby in a bassinet. They have a lower center of gravity, more mass, a broader base of support and can hold a larger baby than a bassinet. Infant beds are more stable than bassinets and as such become desirable when a baby can roll, transferring inertia with their actions; a bassinet may tip, an infant bed won't without concerted effort. Around two or three years of age children are able to defeat their confinement and should be moved to a toddler bed to prevent an injurious fall while escaping their bed (falls account for 66% of emergency room admissions due to infant beds in the United States.).
Placing a child into an infant bed can put strain on a caretaker's back as they typically have a mass between 11.8 kilograms (26 lb) and 16.8 kilograms (37 lb) at 36 months of age. To reduce the strain on those operating an infant bed, many infant beds feature:
- a mattress that can be in a raised position until the child is able to sit upright, and potentially lowered further when they are likely to begin standing (between 8 and 12 months).
- casters to make it easier to move the bed around.
The American Academy of Pediatrics recommends that infants under 12 months share a room (but not a bed) with their parents, as this has shown to be protective against sudden infant death syndrome (SIDS). Other sleep environment factors include supine positioning (back sleeping), use of a firm sleep surface, breastfeeding, consideration of a pacifier (dummy), and avoidance of soft bedding, overheating, and exposure to tobacco smoke.
Scientific research has shown that the mattress influences SIDS outcomes; a firm, clean and well-fitting mattress lowers SIDS risk. However, neither mattress materials nor using a second-hand mattress affect SIDS risk. It is common to place a waterproof membrane between the mattress and the bedding to prevent uncontained bed wetting from damaging the mattress. Bed sheets ought to fit the mattress tightly so that the child cannot become entangled and suffocate; a common safety recommendation is to short sheet the bed.
Because of the pronounced risk of suffocation in very young children, and the danger of a fall from the bed for other children, the addition of anything other than sheets (including quilts, pillows and stuffed toys) into an infant bed is not recommended by health authorities. A sleepsack can be used instead to keep the baby warm. Older children can use items such as pillows and toys to construct a platform to facilitate escape, defeating the major design criteria and endangering the child.
Bumpers (cushioning) are marketed to keep children from bumping against the hard sides and hurting themselves or becoming entrapped between the crib slats; breathable bumpers are intended to reduce the risk of suffocation. According to 2011 guidelines on safe sleep and SIDS prevention for babies released by the American Academy of Pediatrics (AAP), traditional crib bumper pads should not be used. Their review shows no evidence that traditional crib bumpers protect against injury, but they do carry a potential risk of suffocation, strangulation, or entrapment because infants lack the motor skills or strength to turn their heads if they roll into something that obstructs their breathing. In fact, the sale of traditional crib bumpers has been banned in Chicago and Maryland, with the exemption of mesh alternatives or ones that wrap along the crib rails. Children's product safety non-profit, Kids In Danger is actively working to ban the sale of traditional crib bumpers in Illinois and throughout the country.. The ASTM F15.19 Infant Bedding SubCommittee is actively working to create additional testing standards and revised standards language.
Some toys are specifically intended for an infant bed. Mobiles are musical toys to soothe the baby to sleep, but should be removed before the child can stand (8 to 12 months of age). Mirrors are to keep the children entertained while awake in the bed.
With decreasing technology prices and increasing house sizes, it has become increasingly common to have a baby monitor nearby so as to alert the caretaker when the child awakens. Without either professional endorsement or scientific evidence that they prevent SIDS, apnea monitors are available to alert the caregiver if the baby stops breathing.
|Wikimedia Commons has media related to Infant beds.|
- Co-sleeping, a practice in which babies and young children sleep with one or both parents
- Bassinet, a common precursor bed for babies
- Toddler bed, a common subsequent bed for toddlers
- Single bed/Twin bed, a less common subsequent bed for toddlers due to bed height (making it hard to get in and out) and a lack of integral cot sides to stop the child accidentally rolling out while asleep (although temporary cot sides are widely available)
- Playpen, an enclosure designed to retain a child while playing
- baby bedding
- Kevill-Davies, Sally (1991). Yesterday's Children (Hardcover ed.). Woodbridge, Suffolk: Antique Collectors' Club. p. 121. ISBN 9781851491353. OCLC 25693027. 185149135X.
- George Himmelheber (May 2, 2003). Cast-Iron Furniture. Philip Wilson Publishers. p. 18. ISBN 9780856674624. 0856674621.
- Helena Lee (2013-06-04). "Why Finnish babies sleep in cardboard boxes". BBC News. Retrieved 2013-06-05.
- Consumer Product Safety Commission. "CPSC Saves Lives Through Voluntary Standards and Mandatory Regulation: Crib Safety". Archived from the original on December 16, 2010. Retrieved 2011-12-16.
- Elaine S. Yeh; Lynne M. Rochette; Lara B. McKenzie; Gary A. Smith. "Injuries Associated With Cribs, Playpens, and Bassinets Among Young Children in the US, 1990–2008" (PDF). Retrieved December 16, 2011.
- Mark A. Brandenburg. "Crib Safety". Retrieved December 16, 2011.
- AS/NZS 2172:2010 Cots for household use - Safety requirements. Standards Australia. 2010. ISBN 978-0-7337-9594-7.
- BS EN 716-1:2008 Furniture. Children’s cots and folding cots for domestic use. Safety requirements. British Standards Institution. 2008. ISBN 978 0 580 57969 1.
- Committee F15.18 on Cribs, Toddler Beds, Play Yards, Bassinets, Cradles and Changing Tables (2011). "ASTM F1169 - 11 Standard Consumer Safety Specification for Full-Size Baby Cribs". ASTM International. doi:10.1520/F1169-11.
- ISO TC 136/SC 5/WG 3 (2007). ISO 7175-1:1997 Children's cots and folding cots for domestic use - Part 1: Safety requirements. International Organization for Standardization.
- "U.S. Government Bans Drop-Side Cribs". Time. June 28, 2011. Retrieved September 24, 2014.
- "Health Canada bans sale, import, advertisement of drop-side cribs". CBC News. Retrieved 30 June 2016.
- AS/NZS 2195:2010: Folding cots—Safety requirements. Sydney, NSW: Standards Australia and Standards New Zealand. 2010. ISBN 0 7337 9323 1.
- "Child growth standards: Weight-for-age tables: Girls percentiles (10th percentile at 36 months)". World Health Organisation. Retrieved 2012-03-17.
- "Child growth standards: Weight-for-age tables: Boys percentiles (90th percentile at 36 months)". World Health Organisation. Retrieved 2012-03-17.
- Task Force on Sudden Infant Death Syndrome; Moon, R. Y. (2011). "SIDS and Other Sleep-Related Infant Deaths: Expansion of Recommendations for a Safe Infant Sleeping Environment". Pediatrics. 128 (5): e1341–e1367. doi:10.1542/peds.2011-2285. PMID 22007003.
- National Scientific Advisory Group (NSAG) (October 2005). "Information Statement: Speculation concerning toxic gas from mattresses and SIDS" (PDF). SIDS and Kids. Melbourne: National SIDS Council of Australia. Retrieved February 12, 2012.
- National Scientific Advisory Group (NSAG) (October 2005). "Information Statement: Second hand mattresses" (PDF). SIDS and Kids. Melbourne: National SIDS Council of Australia. Retrieved February 12, 2012.
- National Scientific Advisory Group (NSAG). "Make up your baby's cot using safe sleeping messaging" (PDF). SIDS and Kids. Melbourne: National SIDS Council of Australia. Retrieved February 12, 2012.
- "A Parents' Guide to Safe Sleep: Helping you to reduce the risk of SIDS" (PDF). American Academy of Pediatrics. 2011. Retrieved 2012-03-17.
- Redway, Tim (June 2008). "PIA Seminar Housing Density & Design". p. 6. Retrieved January 3, 2012.
- "Frequently Asked Questions - Do baby monitors reduce the risk of sudden unexpected death in infancy?". SIDS and Kids. National SIDS Council of Australia. March 26, 2010. Retrieved February 12, 2012.
- United States federal government's Consumer Product Safety Commission. "Full-Size Baby Cribs and Non-Full-Size Baby Cribs: Safety Standards" (PDF). Retrieved 2011-12-16.
- CPSC crib safety standards