Aerial application

From Wikipedia, the free encyclopedia
  (Redirected from Crop dusting)
Jump to: navigation, search
A crop duster applying a fine mist
A Mil Mi-8 spreading fertilizer
A Schweizer S269C fitted with spraying booms
Altitude and wind affect dispersion. Photo by Charles O'Rear, 1972.

Aerial application, or what was formerly referred to as crop dusting, involves spraying crops with crop protection products from an agricultural aircraft. Planting certain types of seed are also included in aerial application. The specific spreading of fertilizer is also known as aerial topdressing in some countries.

Agricultural aircraft are highly specialized, purpose-built aircraft. Today's agricultural aircraft are often powered by turbine engines of up to 1500 hp and can carry as much as 800 gallons of crop protection product. Helicopters are sometimes used, and some aircraft serve double duty as water bombers in areas prone to wildfires.(These aircraft are referred to as SEAT, "single engine air tankers").


Aerial Seed Sowing 1906[edit]

The first known aerial application of agricultural materials was by John Chaytor, who in 1906 spread seed over a swamped valley floor in Wairoa, New Zealand, using a hot air balloon with mobile tethers.[citation needed] Aerial sowing of seed still continues to this day with cover crop applications and rice planting.

Crop Dusting 1921[edit]

Lt. Macready (right) and McCook Field engineer E. Dormoy (left) in front of the 1st crop duster airplane (August 3, 1921)

The first known use of a heavier-than-air machine to disperse products occurred on 3 August 1921.[1] Crop dusting was developed under the joint efforts of the US Agriculture Department, and the US Army Signal Corps's research station at McCook Field in Dayton, Ohio.[1] Under the direction of McCook engineer Etienne Dormoy, a United States Army Air Service Curtiss JN4 Jenny piloted by John A. Macready was modified at McCook Field to spread lead arsenate to kill catalpa sphinx caterpillars at a Catalapa farm near Troy, Ohio in the United States.[1][2] The first test was considered highly successful.[1] The first commercial operations were begun in 1924, by Huff-Daland Crop Dusting, which was co-founded by McCook Field test pilot Lt. Harold R. Harris.[1] Use of insecticide and fungicide for crop dusting slowly spread in the Americas and to a lesser extent other nations in the 1930s. The name 'crop dusting' originated here, as actual dust was spread across the crops. Today, aerial applicators use liquid crop protection products in very small doses.

Top dressing 1939–1946[edit]

Aerial topdressing is the aerial application of fertilisers over farmland using agricultural aircraft. It was developed in New Zealand in the 1940s and rapidly adopted elsewhere in the 1950s.[citation needed]

Purpose-built aircraft[edit]

In 1951, Leland Snow begins designing the first aircraft specifically built for aerial application, the S-1.

In 1957, The Grumman G-164 Ag-Cat is the first aircraft designed by a major company for ag aviation.

Unmanned aerial application[edit]

A Yamaha R-MAX, a UAV commonly used for aerial application in Japan.

Beginning in the late 1990s, unmanned aerial vehicles are also being used for agricultural spraying. This phenomenon started in Japan and South Korea, where mountainous terrain and relatively small family-owned farms required lower-cost and higher precision spraying. As of 2014, the use of UAV crop dusters, such as the Yamaha R-MAX, is being expanded to the United States for use in spraying of vineyards.[3]

See also[edit]


  1. ^ a b c d e Johnson, Mary Ann. McCook Field 1917-1927. Landfall Press, Dayton, Ohio: 2002. ISBN 0-913428-84-1, pp. 190-191.
  2. ^ Houser, J.S. (1922), "The Airplane in Catalpa Sphinx Control", Ohio Agricultural Experiment Station, Monthly Bulletin (7): 126–36 
  3. ^ Evan Ackerman, Yamaha Demos Agricultural RoboCopter, But Humans Can't Unleash It Yet, IEEE Spectrum, Oct. 16th 2014.
  • Johnson, Mary Ann. McCook Field 1917-1927. Landfall Press, Dayton, Ohio: 2002. ISBN 0-913428-84-1, pp. 190–191.