5.8×42mm

From Wikipedia, the free encyclopedia
(Redirected from DBP87)
5.8×42mm
DBP87 round
TypeRifle, carbine, designated marksman rifle, and light machine gun
Place of originPeople's Republic of China
Service history
Used byPeople's Liberation Army
Production history
DesignerPeople's Liberation Army
Designed1979–1987
Produced1987–present
Variants5.8×42mm DBP-87
5.8×42mm DBP-95
5.8×42mm DBP-88 heavy round
5.8×42mm DBP10
Specifications
Case typebottleneck[1]
Bullet diameter6.00 mm (0.236 in)
Neck diameter6.65 mm (0.262 in)
Shoulder diameter9.35 mm (0.368 in)
Base diameter10.40 mm (0.409 in)
Rim diameter10.42 mm (0.410 in)
Rim thickness1.42 mm (0.056 in)
Case length42.2 mm (1.66 in)
Overall length58 mm (2.3 in)
Case capacity2.11 cm3 (32.6 gr H2O)
Rifling twist240 mm or 210 mm
(1 in 9.45 or 1 in 8.27)
Ballistic performance
Bullet mass/type Velocity Energy
4.15 g (64 gr) DBP87/95 FMJ 930 m/s (3,100 ft/s) 1,795 J (1,324 ft⋅lbf)
5 g (77 gr) DBP88 FMJ 870 m/s (2,900 ft/s) 1,892 J (1,395 ft⋅lbf)
4.6 g (71 gr) DBP10 FMJ 915 m/s (3,000 ft/s) 1,926 J (1,421 ft⋅lbf)
Test barrel length: 557mm (21.9 in)
Source(s): Anthony Williams[2][3]

The 5.8×42mm / DBP87 ("Dàn (弹) Bùqiāng (步枪) Pŭtōng (普通), 1987"; literally "Standard Rifle Cartridge, 1987") is a military bottlenecked intermediate cartridge developed in the People's Republic of China. There is limited information on this cartridge, although the People's Liberation Army claims that it is superior to the 5.56×45mm NATO and Soviet 5.45×39mm cartridges.

Another variant called the DBP88 "heavy round" was designed specifically for squad automatic weapons and designated marksman rifles. The 5.8×42mm "heavy round" cartridge has the same dimensions as the standard 5.8×42mm cartridge, but utilizes a longer streamlined bullet with a heavy steel core for increased performance at extended ranges and penetration. As of 2010, all 5.8×42mm cartridge variants have been succeeded by the DBP10 variant.

History[edit]

The Chinese armaments industry and the Chinese military were informed about the developments and experience that the US armed forces had during the Vietnam War with the M16 rifle and its 5.56×45mm M193 ammunition – not least because of the arms aid for Vietnam, as a result of which there was a high probability that captured US small arms and ammunition reached China. In March 1971, the so-called "Conference 713" was held in Beijing, at which future developments in the field of infantry weapons were discussed and criteria for infantry weapons and ammunition were established.

The new ammunition to be developed should have a caliber of around 6 mm (0.24 in) and a muzzle velocity of around 1,000 m/s (3,300 ft/s). Compared to the standard 7.62×39mm cartridge, recoil and weight were to be reduced whilst accuracy and terminal ballistics had to be improved. At the "744 Conference" the caliber choice was narrowed down to either 5.8 or 6 mm (0.23 or 0.24 in). Seven different case designs were presented, which required overall cartridge lengths between 56 and 59.5 mm (2.20 and 2.34 in). The actual development began in 1978.

In 1979, the caliber and case length choices were determined and China started the development of the 5.8×42mm cartridge and finalized the cartridge in 1987. The 5.8×42mm / DBP87 was designed to replace the Soviet 7.62×39mm and 5.45×39mm cartridges used by the People's Liberation Army (PLA). The Type 95 / QBZ-95 (Chinese: 轻武器,步枪,自动, 1995; Pinyin: Qīng wǔqì, Bùqiāng, Zìdòng, 1995; literally "Light weapon, Rifle, Automatic, 1995") 5.8 mm caliber assault rifle, firing the 5.8×42mm / DBP87 or the improved DBP95, is now the standard issue weapon in the PLA. The DBP87 service round was quickly supplemented in 1988 by the DBP88 round which was loaded with a heavier more aerodynamic projectile for improved extended range performance.

The 5.8×42mm is an example of an international tendency towards relatively small-sized, lightweight, high-velocity military service cartridges. Cartridges like the Belgian 5.56×45mm NATO, Soviet 5.45×39mm, and Chinese 5.8×42mm allow a soldier to carry more ammunition for the same weight compared to their larger and heavier predecessor cartridges, have favourable maximum point-blank range or "battle zero" characteristics and produce relatively low bolt thrust and free recoil impulse, favouring light weight arms design and automatic fire accuracy.[2]

In June 2004, an improved version of the 5.8×42mm cartridge entered development as the matching ammunition for the revised assault rifle, Type 95-1. Both designs were finalized in 2010 and production began the same year. This new cartridge is known as DBP10.

To improve accuracy and barrel life the barrel was also redesigned. The number of rifling grooves was increased from 4 to 6. The diameter of the lands was slightly increased from 5.8–5.84 mm (0.228–0.230 in) to 5.82–5.86 mm (0.229–0.231 in). The groove diameter was decreased from 6.01–6.07 mm (0.237–0.239 in) to 5.98–6.02 mm (0.235–0.237 in). In addition, the twist rate in the revised 95-1 assault rifle was reduced from 240–210 mm (9.4–8.3 in).These changes reduced the rifling twist rate from 41.2 to 36 calibers.

The People's Liberation Army claims that the 5.8×42mm is superior to the 5.56×45mm NATO SS109 and the 5.45×39mm 7N6; stating it has better armor penetration of 10 mm (0.39 in) at 300 m (980 ft), a flatter trajectory, and a higher retention of velocity and energy downrange.[2]

5.8×42mm cartridge variants[edit]

DBP87[edit]

The DBP87 cartridge with 4.15 grams (64.0 gr) bullets has a muzzle velocity of 930 metres per second (3,051 ft/s) from a standard barrel (Type 95 / QBZ-95, 463 mm barrel length), and 940 to 960 metres per second (3,084 to 3,150 ft/s) from the Type 95 LSW (557 mm barrel length). The bullet has a ballistic coefficient (G7 BC) of approximately 0.156.[4] The DBP87 cartridge has an operating pressure of 282.7 MPa (41,000 psi).

The steel core has a diameter of 4.1 millimetres (0.16 in). In order to save cost, several compromises were made. In particular, the cartridge case is made of steel, which is cheaper than brass. To reduce the chance of rust, the case is covered in a thin layer of protective paint in dark brown. To ensure high extraction reliability, the case has a thick rim and a large extractor groove. [5][6]

DBP88[edit]

The DBP88 "heavy round" cartridge has a 5 grams (77 gr) bullet and a muzzle velocity of 870 metres per second (2,854 ft/s) from a standard barrel (Type 95 / QBZ-95, 463 mm barrel length), and 940 to 960 metres per second (3,084 to 3,150 ft/s) from the Type 95 LSW / Type 95 SAW / QJB-95 (557 mm barrel length), and 895 metres per second (2,936 ft/s) from the Type 88 / QBU-88 (620 mm barrel length). The bullet has a ballistic coefficient (G7 BC) of approximately 0.210.[4] It has an effective range of 800 metres (875 yd) and can penetrate 3 mm steel plates at a distance of 1,000 metres (1,094 yd). The DBP88 cartridge has an operating pressure of 317.2 MPa (46,000 psi).

The DBP95 cartridge was developed in 1995 for the QBZ-95. The DBP95 is an improved version of the DBP87 that uses a cleaner propellant and non corrosive primer. Its performance remains similar and the production costs are higher, but the negative effects on the weapon are reduced. It is basically the same round as the DBP87 other than these minor differences, and was used until 2010 when it was replaced by the DBP10.[7]

DBP10[edit]

The DBP10 cartridge was developed in 2010 and has a hardened steel-cored 4.6 grams (71 gr) bullet, a muzzle velocity of 915 metres per second (3,002 ft/s) from a standard barrel (Type 95 / QBZ-95, 463 mm barrel length) and was designed to match nine different then serving 5.8×42mm chambered weapons. These weapons featured different barrel twist rates between 178 to 240 mm (7.0 to 9.4 in) and the DPB10 was optimized for the faster twist rates used in newer weapons. As such, it was introduced to consolidate and replace all previous DBP87/95 and DBP88 5.8×42mm rounds. The bullet has a ballistic coefficient (G7 BC) of approximately 0.193.[4]

Major improvements include a non-corrosive primer, a copper-coated steel case with a copper alloy bullet jacket with a 3.8 millimetres (0.15 in) diameter hardened steel core for better penetration of body armor. It also uses a cleaner burning propellant so as not to leave residue inside the weapon after firing. However, although testing of the previous DBP87/95 5.8 mm rounds showed that they were less likely to cause serious wounds, the issue was not addressed with the new DBP10 round.[8][9] DBP10 has an operating pressure of 255 to 289.4 MPa (36,980 to 41,970 psi).[10] According to another source DBP10 has an operating pressure of 289.6 MPa (42,000 psi).[11]

The DBP10 cartridge weighs 12.9 grams (199 gr).[4] The accuracy of fire at 300 m (328 yd) (R50) is stated as 75 mm (3.0 in), at 600 m (656 yd) (R50) is stated as 140 mm (5.5 in) and at 800 m (875 yd) (R50) is stated as 230 mm (9.1 in). R50 at a specific range means the closest 50 percent of the shot group will all be within a circle of the mentioned diameter at that range. The circular error probable method employed by the Chinese and other (European) militaries cannot be converted and is not comparable to the common US methods (group size of 5 or 10 successive shots fired at 100 yards) for determining accuracy.

DBU141[edit]

The QBU-141, a small caliber sniper rifle intended to be used with 5.8×42mm DBU-141 high-precision ammunition in a 10-round box magazine. The specifically designed munition improves accuracy, whereas China's previous sniper/designated marksman rifles use standard machine gun rounds.[12][13]

DBP191[edit]

According to Chinese media, the new generation service rifle QBZ-191 introduced in 2019 is chambered in 5.8×42mm caliber. Along with the new service rifle redesigned DBP-191 ammunition was introduced that has better ballistic performance.[14][15]

Use[edit]

See also[edit]

References[edit]

  1. ^ "5.8x42 Chino / MUNICION.ORG". Archived from the original on October 23, 2013. Retrieved September 27, 2012.
  2. ^ a b c Williams, Anthony G. (2008-06-22). "Assault Rifles and their Ammunition: History and Prospects". Archived from the original on 2017-11-05. Retrieved 2014-09-29.
  3. ^ "Intermediate power ammunition for automatic assault rifles". Archived from the original on 2012-07-18.
  4. ^ a b c d Nathaniel F (16 August 2016). "Modern Intermediate Calibers 016: The 5.8×42mm Chinese". thefirearmblog.com. Retrieved 17 May 2017.
  5. ^ PLA Moves Its Assault Rifle To Next Level by David M. Fortier Archived April 16, 2009, at the Wayback Machine
  6. ^ "DBP87 5.8x42mm: China's High-Velocity Cartridge". 29 November 2017.
  7. ^ "5.8x42mm Chinese | Weaponsystems.net".
  8. ^ China Switches To The Good Stuff – Strategypage.com
  9. ^ PLA Type 95 Rifle: Breaking with Convention – SAdefensejournal.com, 21 October 2013
  10. ^ http://bbs.big5.voc.com.cn/viewthread.php?action=printable&tid=3828716 《輕兵器》雜誌曝光95自動步槍最新改進型
  11. ^ China's 58x42mm Rifle Cartridge - How Good Is It?
  12. ^ Gao, Charlie (8 June 2018). "Why China's Snipers Should Be Feared". National Interest.
  13. ^ "CS/LR3（QBU141）狙击步枪". Guns' World (in Chinese).
  14. ^ "DBP-191才是QBZ-191突击步枪的灵魂！可惜知道太少". toutiao (in Chinese). 2 October 2020.
  15. ^ Roblin, Sebastien (8 January 2021). "What We've Learned About China's New QBZ-191 Assault Rifle". National Interest.
  16. ^ "China's OICW: Type 05 Strategy Rifle (ZH-05 5.8mm + 20mm)". The Firearms Blog. 23 February 2011. Retrieved September 27, 2012.

External links[edit]

Retrieved from "https://en.wikipedia.org/w/index.php?title=5.8×42mm&oldid=1190271830"