Jump to content

De Vaux Continental

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Bahooka (talk | contribs) at 17:06, 23 April 2015 (De Vaux and De Vaux Continental Model Comparison: heading capitalization). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The Continental De Vaux was an automobile produced by the Continental-De Vaux Company in Grand Rapids, Michigan.

In April 1931, De Vaux-Hall Motors started production of an automobile based on the defunct Durant (automobile). Norman de vaux had been an executive with Durant. The car was called the 6/75 and used a 6-cylinder engine that had been modified by renowned engineer Col. Elbert J. Hall, whose company Hall-Scott Motor Car Company of Berkeley, California, had built engines for airplanes, tractors, buses, and boats, and who helped develop the famed World War I Liberty airplane engine with Packard's Jesse Vincent. The company had two plants - one in Grand Rapids and the other in Oakland, California. Poorly capitalized, after only 4808 cars built the company declared bankruptcy in Michigan court, citing $2 million in assets and $1.8 in liabilites, including $487,000 owed to engine maker Continental Motors Corporation. Continental purchased the Michigan assets of De Vaux-Hall and later changed the operation's name to Continental-De Vaux Company.

Production of the De Vaux Continental (sometimes called vice-verso) took place during the 1932 model year. The car was basically the De Vaux 6/75 of the previous year, that itself was based on the former 1930 Durant (automobile). It rode on a 113 in. wheelbase and still carried the facelift that Count Alexis de Sakhnoffsky did for the De Vaux in 1931. The Hall-modified Continental 22-A 6-cylinder L-head engine was replaced by a Continental 32-A 6-cylinder L-head with a displacement of 214.7 c.i. (3518 ccm), delivering 84 HP @ 3400 rpm. The car now was designated the De Vaux Continental 6/80. Offered were a standard coupe for $725 ($775 with rumble seat), a coupe and a sedan in custom trim for $845 each, and a new custom convertible coupe for $895. Assembly of the vehicles occurred in the former De Vaux-Hall plant in Grand Rapids (which was connected to their body supplier, the Hayes Body Corporation, by a bridge).

Continental brought out its own cars for the 1933 and 1934 model years, not based on the Durant/De Vaux cars, but sold poorly so ceased production.

De Vaux and De Vaux Continental model comparison

Make Model Production Run Engine Power Wheelbase Body Styles
De Vaux 6/75 4/31 - 1/32 DeVaux-Hall

inline 6

70 bhp (52 kW) 113 in (2870 mm) Standard Coupe
De Vaux 6/75 4/31 - 1/32 DeVaux-Hall

inline 6

70 bhp (52 kW) 113 in (2870 mm) Standard Sedan
De Vaux 6/75 4/31 - 1/32 DeVaux-Hall

inline 6

70 bhp (52 kW) 113 in (2870 mm) Sport Coupe (4p.)
De Vaux 6/75 4/31 - 1/32 DeVaux-Hall

inline 6

70 bhp (52 kW) 113 in (2870 mm) Sport Sedan
De Vaux 6/75 4/31 - 1/32 DeVaux-Hall

inline 6

70 bhp (52 kW) 113 in (2870 mm) De Luxe Coupe
De Vaux 6/75 4/31 - 1/32 DeVaux-Hall

inline 6

70 bhp (52 kW) 113 in (2870 mm) De Luxe Sedan
De Vaux 6/75 4/31 - 1/32 DeVaux-Hall

inline 6

70 bhp (52 kW) 113 in (2870 mm) Custom Coupe
De Vaux 6/75 4/31 - 1/32 DeVaux-Hall

inline 6

70 bhp (52 kW) 113 in (2870 mm) Custom Sedan
De Vaux Continental 6/80 2/32 - 11/32 Continental

inline 6

84 bhp (63 kW) 113 in (2870 mm) Standard Coupe
De Vaux Continental 6/80 2/32 - 11/32 Continental

inline 6

84 bhp (63 kW) 113 in (2870 mm) Standard Sedan
De Vaux Continental 6/80 2/32 - 11/32 Continental

inline 6

84 bhp (63 kW) 113 in (2870 mm) Custom Coupe
De Vaux Continental 6/80 2/32 - 11/32 Continental

inline 6

84 bhp (63 kW) 113 in (2870 mm) Custom Sedan
De Vaux Continental 6/80 2/32 - 11/32 Continental

inline 6

84 bhp (63 kW) 113 in (2870 mm) Custom Convertible Coupe

With 1,358 cars built by November, 1932, the new car was a straightaway failure. Now, Continental dropped the Continental-De Vaux Company and decided to build the car under its own label. Continentals were produced in three series: Beacon (C400) Four, Flyer Six and Ace Six. Each had its own wheelbase (101.5, 107, and 114 in., respectively). Prices started as low as $355 for a Beacon standard roadster and ended at $845 for the Ace custom sedan. Sixes shared the engine of the former De Vaux Continental 6/80. After another disastrous year with just 3,310 sales in all series, the sixes were dropped for 1934 as wer 3 of the 7 bodystyles of the Beacon. Production halted forever in 1934 with 953 Beacons built.

The De Vaux Continental was built in Canada by Dominion Motors as the Frontenac 6/85 as were some Continentals.

References

  • Bradford, Francis and Ric Dias, Hall-Scott, the Untold Story of a Great American Engine Maker (Warrendale: SAE, Int'l, 2007)
  • Kimes, Beverly Rae (editor) and Clark, Henry Austin, jr.,; The Standard Catalogue of American Cars, 2nd Edition, Krause Publications, Iola WI 54990 (1985), ISBN 0-87341-111-0
  • Durant Motors Automobile Club (DMAC)