Inter-molecular forces (IMFs) are the forces which mediate interaction between molecules, including forces of attraction or repulsion which act between molecules and other types of neighboring particles, e.g., atoms or ions. Inter-molecular forces are weak relative to intramolecular forces – the forces which hold a molecule together. For example, the covalent bond, involving sharing electron pairs between atoms, is much stronger than the forces present between neighboring molecules. Both sets of forces are essential parts of force fields frequently used in molecular mechanics.
The investigation of inter-molecular forces starts from macroscopic observations which indicate the existence and action of forces at a molecular level. These observations include non-ideal-gas thermodynamic behavior reflected by virial coefficients, vapor pressure, viscosity, superficial tension, and absorption data.
The first reference to the nature of microscopic forces is found in Alexis Clairaut's work Theorie de la Figure DE la Terre. Other scientists who have contributed to the investigation of microscopic forces include: Laplace, Gauss, Maxwell and Boltzmann.,
Attractive intermolecular forces are considered by the following types:
- Ion-induced dipole forces
- Ion-dipole forces
- van der Waals forces – Keesom force, Debye force, and London dispersion force
Information on intermolecular force is obtained by macroscopic measurements of properties like viscosity, PVT data. The link to microscopic aspects is given by virial coefficients and Lennard-Jones potentials.
- 1 Dipole-dipole interactions
- 2 Van der Waals forces
- 3 Relative strength of forces
- 4 Effect on the behavior of gases
- 5 Quantum mechanical theories
- 6 See also
- 7 References
Dipole-dipole interactions 
Dipole-dipole interactions are electrostatic interactions between molecules which have permanent dipole(s). These interactions tend to align the molecules to increase attraction (reducing potential energy). An example of a dipole-dipole interaction can be seen in hydrogen chloride (HCl): the positive end of a polar molecule will attract the negative end of the other molecule and influence its position. Polar molecules have a net attraction between them. Examples of polar molecules include hydrogen chloride (HCl) and chloroform (CHCl3).
Often molecules contain dipolar groups, but have no overall dipole moment. This occurs if there is symmetry within the molecule that causes the dipoles to cancel each other out. This occurs in molecules such as tetrachloromethane and carbon dioxide. The dipole-dipole interaction between two individual atoms is usually zero, since atoms rarely carry a permanent dipole.
Ion-dipole and ion-induced dipole forces
Ion-dipole and ion-induced dipole forces are similar to dipole-dipole and induced-dipole interactions but involve ions, instead of only polar and non-polar molecules. Ion-dipole and ion-induced dipole forces are stronger than dipole-dipole interactions because the charge of any ion is much greater than the charge of a dipole moment. Ion-dipole bonding is stronger than hydrogen bonding.
An ion-dipole force consists of an ion and a polar molecule interacting. They align so that the positive and negative groups are next to one another, allowing maximum attraction.
An ion-induced dipole force consists of an ion and a non-polar molecule interacting. Like a dipole-induced dipole force, the charge of the ion causes distortion of the electron cloud on the non-polar molecule.
A hydrogen bond is the attraction between the lone pair of an electronegative atom and a hydrogen atom that is bonded to either nitrogen, oxygen, or fluorine. The hydrogen bond is often described as a strong electrostatic dipole-dipole interaction. However, it also has some features of covalent bonding: it is directional, stronger than a van der Waals force interaction, produces interatomic distances shorter than the sum of van der Waals radius, and usually involves a limited number of interaction partners, which can be interpreted as a kind of valence.
Intermolecular hydrogen bonding is responsible for the high boiling point of water (100 °C) compared to the other group 16 hydrides, which have no hydrogen bonds. Intramolecular hydrogen oxygen bonding is partly responsible for the secondary, tertiary, and quaternary structures of proteins and nucleic acids. It also plays an important role in the structure of polymers, both synthetic and natural.
Van der Waals forces
The van der Waals forces arise from interaction between uncharged atoms or molecules, leading not only to such phenomena as the cohesion of condensed phases and physical adsorption of gases, but also to a universal force of attraction between macroscopic bodies.
Keesom (permanent-permanent dipoles) interaction
The first contribution to van der Waals forces is due to electrostatic interactions between charges (in molecular ions), dipoles (for polar molecules), quadrupoles (all molecules with symmetry lower than cubic), and permanent multipoles. It is termed Keesom interactions, named after Willem Hendrik Keesom. These forces originate from the attraction between permanent dipoles (dipolar molecules) and are temperature dependent.
They consist of attractive interactions between dipoles that are ensemble averaged over different rotational orientations of the dipoles. It is assumed that the molecules are constantly rotating and never get locked into place. This is a good assumption, but at some point molecules do get locked into place. The energy of a Keesom interaction depends on the inverse sixth power of the distance, unlike the interaction energy of two spatially fixed dipoles, which depends on the inverse third power of the distance. The Keesom interaction can only occur among molecules that possess permanent dipole moments, i.e., two polar molecules. Also Keesom interactions are very weak van der Waals interactions and do not occur in aqueous solutions that contain electrolytes. The angle averaged interaction is given by the following equation:
Where m = charge per length, = permitivity of free space, = dielectric constant of surrounding material, T = temperature, = Boltzmann constant, and r = distance between molecules.
Debye (permanent-induced dipoles) force
The second contribution is the induction (also termed polarization) or Debye force, arising from interactions between rotating permanent dipoles and from the polarizability of atoms and molecules (induced dipoles). These induced dipoles occur when one molecule with a permanent dipole repels another molecule’s electrons. A molecule with permanent dipole can induce a dipole in a similar neighboring molecule and cause mutual attraction. Debye forces cannot occur between atoms. The forces between induced and permanent dipoles are not as temperature dependent as Keesom interactions because the induced dipole is free to shift and rotate around the non-polar molecule. The Debye induction effects and Keesom orientation effects are termed polar interactions.
The induced dipole forces appear from the induction (also termed polarization), which is the attractive interaction between a permanent multipole on one molecule with an induced (by the former di/multi-pole) multipole on another. This interaction is called the Debye force, named after Peter J.W. Debye.
One example of an induction-interaction between permanent dipole and induced dipole is the interaction between HCl and Ar. In this system, Ar experiences a dipole as its electrons are attracted (to the H side of HCl) or repelled (from the Cl side) by HCl. The angle averaged interaction is given by the following equation.
Where = polarizability
This kind of interaction can be expected between any polar molecule and non-polar/symmetrical molecule. The induction-interaction force is far weaker than dipole-dipole interaction, but stronger than the London dispersion force.
London dispersion force (induced dipole-induced dipoles interaction)
The third and dominant contribution is the dispersion or London force (fluctuating dipole-induced dipole), which arises due to the non-zero instantaneous dipole moments of all atoms and molecules. Such polarization can be induced either by a polar molecule or by the repulsion of negatively charged electron clouds in non-polar molecules. Thus, London interactions are caused by random fluctuations of electron density in an electron cloud. An atom with a large number of electrons will have a greater associated London force than an atom with fewer electrons. The dispersion (London) force is the most important component because all materials are polarizable, whereas Keesom and Debye forces require permanent dipoles. The London interaction is universal and is present in atom-atom interactions as well. For various reasons, London interactions (dispersion) have been considered relevant for interactions between macroscopic bodies in condensed systems. Hamaker developed the theory of van der Waals between macroscopic bodies in 1937 and showed that the additivity of these interactions renders them considerably more long-range.
Relative strength of forces
|Bond type||Dissociation energy
|Hydrogen bond||1–12||About 5 in water|
|London dispersion forces||<1 to 15||Estimated from the enthalpies of vaporization of hydrocarbons|
This comparison is approximate. The actual relative strengths will vary depending on the molecules involved. Ionic bonding and covalent bonding will always be stronger than intermolecular forces in any given substance.
Effect on the behavior of gases
Intermolecular forces are repulsive at short distances and attractive at long distances (see the Lennard-Jones potential). In a gas, the repulsive force chiefly has the effect of keeping two molecules from occupying the same volume. This gives a real gas a tendency to occupy a larger volume than an ideal gas at the same temperature and pressure. The attractive force draws molecules closer together and gives a real gas a tendency to occupy a smaller volume than an ideal gas. Which interaction is more important depends on temperature and pressure (see compressibility factor).
In a gas, the distances between molecules are generally large, so intermolecular forces have only a small effect. The attractive force is not overcome by the repulsive force, but by the thermal energy of the molecules. Temperature is the measure of thermal energy, so increasing temperature reduces the influence of the attractive force. In contrast, the influence of the repulsive force is essentially unaffected by temperature.
When a gas is compressed to increase its density, the influence of the attractive force increases. If the gas is made sufficiently dense, the attractions can become large enough to overcome the tendency of thermal motion to cause the molecules to disperse. Then the gas can condense to form a solid or liquid, i.e., a condensed phase. Lower temperature favors the formation of a condensed phase. In a condensed phase, there is very nearly a balance between the attractive and repulsive forces.
Quantum mechanical theories
|This section needs expansion. You can help by adding to it. (September 2009)|
Intermolecular forces observed between atoms and molecules can be described phenomenologically as occurring between permanent and instantaneous dipoles, as outlined above. Alternatively, one may seek a fundamental, unifying theory that is able to explain the various types of interactions such as hydrogen bonding, van der Waals forces and dipole-dipole interactions. Typically, this is done by applying the ideas of quantum mechanics to molecules, and Rayleigh–Schrödinger perturbation theory has been especially effective in this regard. When applied to existing quantum chemistry methods, such a quantum mechanical explanation of intermolecular interactions, this provides an array of approximate methods that can be used to analyze intermolecular interactions.
- Margenau, H. and Kestner, N. (1969) Theory of intermolecular forces, International Series of Monographs in Natural Philosophy, Pergamon Press, ISBN 1483119289
- Blaber, Michael (1996). Intermolecular Forces. mikeblaber.org
- IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "hydrogen bond".
- Leite, F. L.; Bueno, C. C.; Da Róz, A. L.; Ziemath, E. C.; Oliveira, O. N. (2012). "Theoretical Models for Surface Forces and Adhesion and Their Measurement Using Atomic Force Microscopy". International Journal of Molecular Sciences. 13 (12): 12773. doi:10.3390/ijms131012773.
- Keesom, W.H. (1915). "The second virial coefficient for rigid spherical molecules whose mutual attraction is equivalent to that of a quadruplet placed at its center" (PDF). Proc. R. Acad. Sci. 18: 636–646.
- Blustin, P. H. (1978). "A Floating Gaussian Orbital calculation on argon hydrochloride (Ar · HCl)". Theoretica Chimica Acta. 47 (3): 249. doi:10.1007/BF00577166.
- Roberts, J. K.; Orr, W. J. C. (1938). "Induced dipoles and the heat of adsorption of argon on ionic crystals". Transactions of the Faraday Society. 34: 1346. doi:10.1039/TF9383401346.
- Sapse, A. M.; Rayez-Meaume, M. T.; Rayez, J. C.; Massa, L. J. (1979). "Ion-induced dipole H−n clusters". Nature. 278 (5702): 332. Bibcode:1979Natur.278..332S. doi:10.1038/278332a0.
- Ege, Seyhan (2003) Organic Chemistry: Structure and Reactivity. Houghton Mifflin College. ISBN 0618318097. pp. 30–33, 67
- "Lattice Energies". Retrieved 2014-01-21.
- Majer, V. and Svoboda, V. (1985) Enthalpies of Vaporization of Organic Compounds, Blackwell Scientific Publications, Oxford. ISBN 0632015292
Or no bonding resonance
1)More than number of alpha hydrogen atom