3D model (Jmol)
|Molar mass||108.97 g·mol−1|
|Density||1.46 g mL−1|
|Melting point||−120 to −116 °C; −184 to −177 °F; 153 to 157 K|
|Boiling point||38.0 to 38.8 °C; 100.3 to 101.8 °F; 311.1 to 311.9 K|
|1.067 g/100 mL (0 °C)
0.914 g/100 mL (20 °C)
0.896 g/100 mL (30 °C)
|Solubility||miscible with ethanol, ether, chloroform, organic solvents|
|Vapor pressure||51.97 kPa (at 20 °C)|
|1.3 μmol Pa−1 kg−1|
Refractive index (nD)
|Viscosity||402 Pa s (at 20 °C)|
|105.8 J K−1 mol−1|
Std enthalpy of
|−97.6–93.4 kJ mol−1|
|GHS signal word||DANGER|
|H225, H302, H332, H351|
EU classification (DSD)
|R-phrases||R11, R20/22, R40|
|Flash point||−23 °C (−9 °F; 250 K)|
|511 °C (952 °F; 784 K)|
|Lethal dose or concentration (LD, LC):|
LD50 (median dose)
|1.35 g kg−1 (oral, rat)|
LC50 (median concentration)
|26,980 ppm (rat, 1 hr)
16,230 ppm (mouse, 1 hr)
4681 ppm (rat)
2723 ppm (mouse)
LCLo (lowest published)
|3500 ppm (mouse)
24,000 ppm (guinea pig, 30 min)
7000 ppm (guinea pig, >4.5 hr)
|US health exposure limits (NIOSH):|
|TWA 200 ppm (890 mg/m3)|
IDLH (Immediate danger)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Bromoethane, also known as ethyl bromide, is a chemical compound of the haloalkanes group. It is abbreviated by chemists as EtBr (which is also used as an abbreviation for ethidium bromide). This volatile compound has an ether-like odour.
The preparation of EtBr stands as a model for the synthesis of bromoalkanes in general. It is usually prepared by the addition of HBr to ethene:
- H2C=CH2 + HBr → H3C-CH2Br
Bromoethane is inexpensive and would rarely be prepared in the laboratory. A laboratory synthesis includes reacting ethanol with a mixture of hydrobromic and sulfuric acids. An alternate route involves refluxing ethanol with phosphorus and bromine; phosphorus tribromide is generated in situ.
In organic synthesis, EtBr is the synthetic equivalent of the ethyl carbocation (Et+) synthon. In reality, such a cation is not actually formed. For example, carboxylates salts are converted to ethyl esters, carbanions to ethylated derivatives, thiourea into ethylisothiouronium salts, and amines into ethylamines.
Halocarbons in general are potentially dangerous alkylating agents. Bromides are better alkylating agents than chlorides, thus exposure to EtBr should be minimized. EtBr is classified by the State of California as carcinogenic and a reproductive toxin.
- "NIOSH Pocket Guide to Chemical Hazards #0265". National Institute for Occupational Safety and Health (NIOSH).
- "bromoethane - Compound Summary". PubChem Compound. USA: National Center for Biotechnology Information. 26 March 2005. Identification. Retrieved 15 June 2012.
- "Ethyl bromide". Immediately Dangerous to Life and Health. National Institute for Occupational Safety and Health (NIOSH).
- Oliver Kamm; C. S. Marvel (1941). "Alkyl and alkylene bromides". Org. Synth.; Coll. Vol., 1, p. 25
- Makosza, M.; Jonczyk, A. "Phase-Transfer Alkylation of Nitriles: 2-Phenylbutyronitrile". Org. Synth. 55: 91.; Coll. Vol., 6, p. 897
- Petit, Y.; Larchevêque, M. "Ethyl Glycidate from (S)-Serine: Ethyl (R)-(+)-2,3-Epoxypropanoate". Org. Synth. 75: 37.; Coll. Vol., 10, p. 401
- E. Brand; Brand, F. C. "Guanidodacetic Acid". Org. Synth. 22: 440.; Coll. Vol., 3
- Brasen, W. R; Hauser, C. R. "o-Methylethylbenzyl Alcohol". Org. Synth. 34: 58.; Coll. Vol., 4, p. 582