Ferrari Tipo 500
This article needs additional citations for verification. (April 2016) (Learn how and when to remove this template message)
|Chassis||Single-seater, tubular frame|
|Suspension (front)||Double wishbones, transverse semi-elliptic leaf spring, lever arm shock absorber|
|Suspension (rear)||De Dion axle, twin-trailing arms, transverse semi-elliptic leaf spring, lever arm shock absorber|
|Axle track||Front: 1,308 mm (51.5 in)
Rear: 1,245 mm (49.0 in)
|Wheelbase||2,197 mm (86.5 in)|
|Engine||Ferrari 1,984 cc (121.1 cu in) L4 naturally aspirated, front engine, longitudinally mounted|
|Transmission||Ferrari 4-speed manual|
|Weight||560 kg (1,230 lb)|
|Notable entrants||Scuderia Ferrari
Scuderia Centro Sud
|Notable drivers|| Alberto Ascari
|Debut||1952 Swiss Grand Prix|
|n.b. Unless otherwise stated, all data refer to
Formula One World Championship Grands Prix only.
For 1952, the FIA announced that Grand Prix races counting towards the World Championship of Drivers would be run to Formula 2 specification rather than to Formula 1, after the withdrawal of Alfa Romeo from the sport. Ferrari were the only team to have a car specifically designed for the new formula. The car was powered by an inline four-cylinder engine which was mounted behind the front axle, improving weight distribution. Alberto Ascari used the car to win his first world championship, winning all but one race with the simple 500. The race he missed was because he was driving the 4.5-litre Ferrari at the Indianapolis 500, however Ferrari won the race he was absent from as well. The following season, Ascari won his second world championship, and Ferrari won all but the final race, which was won by Juan Manuel Fangio, back in racing after an accident which had damaged his neck.
Ascari won seven consecutive World Championship races in the 500, a record which stood until Sebastian Vettel broke it in 2013. If the 1953 Indianapolis 500 (which was run to a different formula, and in which Ascari was not entered) is discounted, the run is extended to nine.
For the 1954 season and the return to Formula One engine regulations, Ferrari 500 chassis were modified for the new regulations with the 2.5-litre 625 engine and would win two more races, one each in 1954 and 1955, although it was not quite fast enough compared to the Mercedes-Benz W196 and Maserati 250F. Despite two new models appearing during this period the 625 was not completely replaced until 1956 when Ferrari began using the D50 chassis Ferrari purchased along with the Lancia Formula One team.
Partial Formula One World Championship results
(key) (results in bold indicate pole position; results in italics indicate fastest lap)
|1952||500||500 2.0 L4||P||SUI||500||BEL||FRA||GBR||GER||NED||ITA||n/a1||n/a1|
|1953||500||500 2.0 L4||P||ARG||500||NED||BEL||FRA||GBR||GER||SUI||ITA||n/a1||n/a1|
|Alberto Ascari||1||1||1||4||1||8 2||1||Ret|
|Luigi Villoresi||2||Ret||2||6||Ret||8 2||6||3|
- 1 – The Constructors' World Championship did not exist before 1958.
- 2 – Shared Drive.