Field flattener lens

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Stub Mandrel (talk | contribs) at 13:48, 6 August 2016 (→‎See also). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Field flattener lens is a type of lens used in modern binocular designs (e.g. Canon 10 x 42 L IS WP, 18 x 50 IS All Weather and Swarovski EL 8.5 x 42, EL 10 x 42) and in astronomic telescopes.

Field flattener lenses in binoculars improve edge sharpness and lower the distortion.

Field flattener lenses counteract the Petzval field curvature of an optical system. In other words, the function of a field flattener lens is to counter the field-angle dependence of the focal length of a system.

The object in designing a field flattening lens is to create a lens that shifts the focal points of the Petzval surface to lie in the same plane. Consider inserting a pane of glass in a focusing beam. Due to refraction, the focal point of the beam is shifted by dependent on the thickness of the glass. Thus we have a thickness as a function of focal shift:

.

is given by the radius of curvature of the Petzval surface, . It can be shown, then, that the radius of curvature for the lens that would flatten out the field is given by

[1]

See also

References

  1. ^ Geary, Joseph (2002). Introduction to Lens Design with Practical ZEMAX Examples. Willmann-Bell. ISBN 0943396751.