File:ISO and UTS Thread Dimensions.svg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file ‎(SVG file, nominally 512 × 346 pixels, file size: 22 KB)

Summary

Description

A diagram of an ISO metric or Unified thread, showing dimensions relative to the pitch (P) and thread height (H). Due to different standards, ISO and UTS share the same geometry, but not absolute dimensions. Also shown is the location rounding permissible in internal (dark grey, top) and external (light grey, bottom) threads.

Key

  • P: Pitch
  • H: Thread height
  • Dmaj: Major diameter
  • Dmin: Minor diameter
  • Dp: Effective pitch diameter
Do not scale from this drawing.
Date
Source Own work using: Inkscape
Author Inductiveload
Permission
(Reusing this file)
Public domain I, the copyright holder of this work, release this work into the public domain. This applies worldwide.
In some countries this may not be legally possible; if so:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.
Other versions

[edit]

  • English (original)
    English (original)
  • Deutsch
    Deutsch
  • български
    български
  • русский
    русский
  • slovenčina
    slovenčina
SVG development
InfoField
 
The SVG code is valid.
 
This diagram was created with Inkscape.
 
 This diagram uses embedded text that can be easily translated using a text editor (<switch> option recommended).

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

inception

16 January 2008

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current20:36, 7 March 2019Thumbnail for version as of 20:36, 7 March 2019512 × 346 (22 KB)GlrxviewBox; -width; -height; -inkscape; -sodipodi; -some defaults; +sans-serif; italic variables
21:10, 23 July 2017Thumbnail for version as of 21:10, 23 July 2017800 × 540 (28 KB)GringerAdd box and recenter D measurements to make line more obvious
14:32, 8 March 2011Thumbnail for version as of 14:32, 8 March 2011800 × 540 (27 KB)Inductiveloadmake edges rounded
20:42, 16 January 2008Thumbnail for version as of 20:42, 16 January 2008800 × 540 (34 KB)Inductiveloaddiameters, not radii
20:00, 16 January 2008Thumbnail for version as of 20:00, 16 January 2008800 × 540 (34 KB)Inductiveload{{Information |Description=A diagram of an ISO metric] ]or [[w:Unified Thread Standard|Unified thread, showing dimensions relative to the pitch (P) and thread height (H). Note that while diferent standards, ISO and UTS share

Global file usage

The following other wikis use this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://en.wikipedia.org/wiki/File:ISO_and_UTS_Thread_Dimensions.svg"