Jump to content

Giga-

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Indefatigable (talk | contribs) at 16:50, 20 October 2016 (Reverted good faith edits by 131.72.78.245 (talk): Britons is the correct word. (TW)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Giga (/ˈɪɡə/ or /ˈɡɪɡə/) is a unit prefix in the metric system denoting a factor of a (short-form) billion (109 or 1000000000). It has the symbol G.

Giga is derived from the Greek word γίγας, meaning "giant". The Oxford English Dictionary reports the earliest written use of giga in this sense to be in the Reports of the IUPAC 14th Conference in 1947: "The following prefixes to abbreviations for the names of units should be used: G giga 109×".

When referring to information units in computing, such as gigabyte, giga may sometimes mean 1073741824 (230), although such use is inconsistent, contrary to standards and has been discouraged by the standards organizations.[1][2] The inconsistency is that gigabit is never (or very rarely) used with the binary interpretation of the prefix, while gigabyte is sometimes used this way. The binary prefix gibi has been adopted for 230, while reserving giga exclusively for the metric definition.

Pronunciation

In English, the initial g of giga can be pronounced /ɡ/ (a hard g as in giggle), or /ˈɪɡə/ (a soft g as in giant, like a j sound, which shares its Greek root).[3]

This latter pronunciation was formalized within the United States in the 1960s and 1980s with the issue by the US National Bureau of Standards of pronunciation guides for the metric prefixes.[4] A prominent example is found in the pronunciation of gigawatts in the 1985 movie Back to the Future.

According to the American writer Kevin Self, a German committee member of the International Electrotechnical Commission proposed giga as a prefix for 109 in the 1920s, drawing on a verse by the humorous poet Christian Morgenstern that appeared in the third (1908) edition of Galgenlieder (Gallows Songs). This suggests that a hard German [ɡ] was originally intended as the pronunciation. Self was unable to ascertain at what point the alternative pronunciation came into occasional use, but claimed that as of 1995 it had died out.[5]

In 1998, a poll by the phonetician John C. Wells found that 84% of Britons preferred the pronunciation of gigabyte starting with /ɡɪ/ (as in gig), 9% with /dʒɪ/ (as in jig), 6% with /ɡaɪ/ (guy), and 1% with /dʒaɪ/ (as in giant).[6]

Common usage

Prefix Base 10 Decimal Adoption
[nb 1]
Name Symbol
quetta Q 1030 1000000000000000000000000000000 2022[7]
ronna R 1027 1000000000000000000000000000
yotta Y 1024 1000000000000000000000000 1991
zetta Z 1021 1000000000000000000000
exa E 1018 1000000000000000000 1975[8]
peta P 1015 1000000000000000
tera T 1012 1000000000000 1960
giga G 109 1000000000
mega M 106 1000000 1873
kilo k 103 1000 1795
hecto h 102 100
deca da 101 10
100 1
deci d 10−1 0.1 1795
centi c 10−2 0.01
milli m 10−3 0.001
micro μ 10−6 0.000001 1873
nano n 10−9 0.000000001 1960
pico p 10−12 0.000000000001
femto f 10−15 0.000000000000001 1964
atto a 10−18 0.000000000000000001
zepto z 10−21 0.000000000000000000001 1991
yocto y 10−24 0.000000000000000000000001
ronto r 10−27 0.000000000000000000000000001 2022[7]
quecto q 10−30 0.000000000000000000000000000001
Notes
  1. ^ Prefixes adopted before 1960 already existed before SI. The introduction of the CGS system was in 1873.

International Electrotechnical Commission (IEC) standard

As a unit of information, 1 GB incorrectly represents 1,073,741,824 or 230 bytes. In IEC standard, the correct notation of 1,073,741,824 is gibi (abbreviated to Gi). So, 1GiB is 1,073,741,824 bytes ( 1 billion and 73 million 741 thousand 824 bytes ) or 1.074GB (when rounded up). A laptop wrongly advertised as having 8GB has indeed 8,589,934,592 bytes of memory or 8.59GB.

See also

References

  1. ^ "§3.1 SI prefixes". The International System of Units (SI) (PDF) (in French and English) (8th ed.). Paris: STEDI Media. 2006. p. 127. ISBN 92-822-2213-6. Retrieved 2007-02-25. [Side note:] These SI prefixes refer strictly to powers of 10. They should not be used to indicate powers of 2 (for example, one kilobit represents 1000 bits and not 1024 bits). The IEC has adopted prefixes for binary powers in the international standard IEC 60027-2: 2005, third edition, Letter symbols to be used in electrical technology — Part 2: Telecommunications and electronics. The names and symbols for the prefixes corresponding to 210, 220, 230, 240, 250, and 260 are, respectively: kibi, Ki; mebi, Mi; gibi, Gi; tebi, Ti; pebi, Pi; and exbi, Ei. Thus, for example, one kibibyte would be written: 1 KiB = 210 B = 1024 B, where B denotes a byte. Although these prefixes are not part of the SI, they should be used in the field of information technology to avoid the incorrect usage of the SI prefixes.
  2. ^ NIST Guide for the Use of the International System of Units (Appendix D. ref 5)
  3. ^ A Practical Guide to the International System of Units, U.S. Metric Association, Feb 2008
  4. ^ NBS Special Publication 304 & 304A, revised August 1981, "A Brief History of Measurement Systems"
  5. ^ Kevin Self, April 1995, "Technically speaking", Spectrum
  6. ^ Wells, J.C. (1998). LPD pronunciation preference poll 1998.
  7. ^ a b "On the extension of the range of SI prefixes". 18 November 2022. Retrieved 5 February 2023.
  8. ^ "Metric (SI) Prefixes". NIST.